All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 02:00, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 06.JPG (cutting the groove for the second foot of my "Lumberjack Championship" inspired wedding cake stand with a Japanese saw)
- 01:59, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 05.JPG (first foot of my "Lumberjack Championship" inspired wedding cake stand fits in nicely)
- 01:58, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 04.JPG (chopping grooves for the feet of my "Lumberjack Championship" inspired wedding cake stand with a bevel edge chisel)
- 01:56, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 03.JPG (cutting grooves for the feet of my "Lumberjack Championship" inspired wedding cake stand with a Japanese saw)
- 01:51, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 02.JPG (''Robinia'' log for my "Lumberjack Championship" inspired wedding cake stand after getting its top end sealed with a wood glue and water mixture for uniform drying)
- 01:47, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 01.JPG (first small-scale prototype of my "Lumberjack Championship" inspired wedding cake stand out of some firewood and a breakfast board)
- 01:43, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 00.jpg (finished "Lumberjack Championship" inspired wedding cake stand with cakes on it)
- 00:08, 2 February 2019 Lukas talk contribs uploaded File:Clear lacquer.JPG (a can of clear laquer with a dripping paintbrush)
- 11:35, 31 January 2019 User account Isensee talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:37, 28 January 2019 Lukas talk contribs uploaded File:Old flatiron.JPG (an old flatiron that can be used for "dirty work", e.g. applying edge banding or ironing wax into fabric)
- 17:56, 28 January 2019 Lukas talk contribs uploaded File:Pliers-style saw set.JPG (A pliers-style saw set)
- 21:09, 27 January 2019 Lukas talk contribs moved page Wood Lathe to Wood Lathes (plural)
- 00:18, 27 January 2019 Lukas talk contribs uploaded File:Lukas at saw.jpg (Lukas. == License == All rights reserved - no derivatives or unauthorized reproduction!)
- 00:16, 27 January 2019 Lukas talk contribs deleted page File:Lukas.PNG
- 02:42, 17 January 2019 User account Keno talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 02:15, 17 January 2019 User account Manu talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:56, 17 January 2019 User account Ignaz talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:51, 17 January 2019 Lukas talk contribs uploaded a new version of File:Familienmitgliedschaft.pdf (updated to 2019)
- 01:50, 17 January 2019 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf (updated to 2019)
- 18:49, 16 January 2019 User account Malte talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 20:34, 13 January 2019 User account Thomas talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:27, 12 January 2019 User account Woodmansam talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:42, 10 January 2019 User account Klangsuche talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:14, 9 January 2019 Lukas talk contribs uploaded a new version of File:Werkstattordnung.pdf (Änderung im Abschnitt "Zugang" ''update for "Zugang"'')
- 18:12, 9 January 2019 Lukas talk contribs uploaded a new version of File:AGB.pdf (Änderung von Punkt 13 (Stand: 9.1.2019) ''update of §13 (2019-1-9)'')
- 20:02, 26 December 2018 Lukas talk contribs uploaded File:Wax wrap Vader.JPG (first test of self-made beeswax wrap as an alternative to aluminum or cling foil ''(Frischhaltefolie)'')
- 19:31, 26 December 2018 Lukas talk contribs uploaded File:Jar jar shelf 7.JPG (late but great update to my "Jar Jar Shelf": putting the glasses in lid-first gives a nice overview of their contents!)
- 16:22, 10 December 2018 Lukas talk contribs moved page Circular Saw to Circular Saws
- 18:25, 3 December 2018 Lukas talk contribs moved page Wanted:Pyrography Burner to Pyrography Burner over redirect
- 18:25, 3 December 2018 Lukas talk contribs deleted redirect Pyrography Burner by overwriting (Deleted to make way for move from "Wanted:Pyrography Burner")
- 00:54, 29 November 2018 User account Lienhart talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:51, 26 November 2018 Lukas talk contribs moved page Johannes, was macht die Klingel?? to Johannes, was macht die Klingel without leaving a redirect (dämliche Sonderzeichen)
- 16:25, 23 November 2018 Lukas talk contribs moved page Laser Briefing to Laser Cutter Introduction (fits with the other introduction pages)
- 22:48, 21 November 2018 User account WiNu talk contribs was created by Lukas talk contribs and password was sent by email (wrong eMail on first try...)
- 22:37, 21 November 2018 User account Winu talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 21:49, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 06.JPG (unerwartete Bonusfunktion des Bierkastentisches - die Grifflöcher sind perfekte Schnapsglashalter!)
- 21:42, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 05.jpg (Bierkastentisch in Benutzung (vergleichsweise aufgeräumt))
- 21:40, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 04.JPG (Sorgfältig angeordnete Bohrungen mehrmals zu messen, ist nervig - am besten das erste Stück als Bohrschablone verwenden (hier für Griffe am Bierkastentisch)!)
- 21:37, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 03.JPG (frisch gebohrte Grifflöcher im Bierkastentisch)
- 21:28, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 02.JPG (Bohren der Befestigungslöcher im Bierkastentisch)
- 21:24, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 01.JPG (Platte für einen Bierkastentisch beim Abschleifen mit dem Exzenterschleifer)
- 21:19, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch SketchUp.PNG (SketchUp-Skizze vom Bierkastentisch im Stil "charcoal loose")
- 21:05, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch cover.jpg (fertiger Bierkastentisch im Einsatz)
- 21:01, 18 November 2018 Lukas talk contribs uploaded File:Stopwatch.svg (Icon made by [http://www.freepik.com/ Freepik] by [http://www.flaticon.com/ FlatIcon.com])
- 20:46, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 20.JPG (both resized wardrobe drawers all done & installed!)
- 20:44, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 19.JPG (ripping down the sides of resized wardrobe drawers a bit more so they would fit under a warped shelf)
- 20:41, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 18.JPG (once the first resized wardrobe drawers was in place, it became painfully clear that the shelf above had warped and hung down in the middle...)
- 20:30, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 17.JPG (first installation attempt of a resized wardrobe drawer's slide failed - mounted too low, now raised by a yardstick's thickness)
- 20:28, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 16.JPG (leveling a slide for a resized wardrobe drawer)
- 20:24, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 15.JPG (butt joint of a resized wardrobe drawer drilled & screwed together as marked before)
- 20:21, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 14.JPG (scribing the ideal screw line of a butt joint for resized wardrobe drawers with a marking gauge)
- 20:20, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 13.JPG (sanding the bottom piece for a resized wardrobe drawer)
- 20:18, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 12.JPG (all "wall" pieces for two resized wardrobe drawers cut, routed & drilled)
- 20:16, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 11.JPG (marking the correct hole locations to assemble a resized wardrobe drawer with dowel centers)
- 20:13, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 10.jpg (drilling holes for dowel pegs into the side piece of a resized wardrobe drawer - a bit of masking tape is a great quick & dirty depth stop!)
- 20:11, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 09.JPG (all parts for two resized wardrobe drawers marked according to their place in the final assembly (1/2, left/right))
- 20:09, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 08.JPG (first "dry" fit of a resized wardrobe drawer after cutting & routing)
- 20:06, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 07.JPG (all grooves for the bottom of resized wardrobe drawers (cut on the router table)
- 20:05, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 06.JPG (test piece on the new router table to make sure the groove will turn out right for my resized wardrobe drawers)
- 20:03, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 05.JPG (parts for resized wardrobe drawers fresh off the table saw)
- 19:19, 9 November 2018 Lukas talk contribs moved page Project:Wax Cloth to Project:Beeswax Wrap without leaving a redirect ("wax cloth" may be more appropriate for clothing/backpacks :-P)
- 20:20, 7 November 2018 Lukas talk contribs moved page Bench Grinder to Bench Grinders
- 21:14, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (further exxageration of tip)
- 20:27, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (double line thickness (2 px))
- 20:04, 6 November 2018 Lukas talk contribs uploaded File:Wood screw - sunk full tapping.svg (Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or...)
- 23:47, 5 November 2018 Lukas talk contribs uploaded File:Makita screwdriver bit set.JPG (a basic woodworking set of screwdriver bits)
- 23:46, 5 November 2018 Lukas talk contribs uploaded File:Screwdriver bit organizers.JPG (a couple of screwdriver bits in various organizers)
- 00:50, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 04.JPG (plans for resized wardrobe drawers taking shape on a common room table)
- 00:48, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 03.JPG (one of the old drawers taken apart to take measurements for resized wardrobe drawers)
- 00:45, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 02.JPG (old drawers taken out to allow measurements for a custom resized wardrobe drawer)
- 00:41, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 01.JPG (look at all that wasted space before a custom resized wardrobe drawer was installed...)
- 00:26, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 00.jpg ("before-and-after" comparison of a custom resized wardrobe drawer and the original small one (front))
- 17:08, 4 November 2018 Lukas talk contribs uploaded File:Drill press depth flexibility.JPG (the depth stop on a drill press is sometimes made of a flexible material, reducing its precision - while this can often be ignored, it is important to remember for fine work)
- 17:02, 4 November 2018 Lukas talk contribs uploaded File:Projector mount.JPG (ceiling mount for our projector, inspired by [https://makezine.com/projects/build-six-axis-positioning-platform-stuff-can-buy-hardware-store/ a Makezine project]])
- 16:58, 4 November 2018 Lukas talk contribs uploaded File:Spatulas.JPG (spatulas on the wood workshop wall)
- 16:50, 4 November 2018 Lukas talk contribs uploaded File:Timber on bandsaw.JPG (large bandsaws can easily cut through quite large pieces, such as this part of a log)
- 16:43, 4 November 2018 Lukas talk contribs uploaded File:Holzdübel.JPG (selection of dowel pegs in our wood workshop)
- 11:03, 4 November 2018 Lukas talk contribs uploaded File:Flip dot clock.JPG (our flip dot display acting as a clock)
- 11:00, 4 November 2018 Lukas talk contribs uploaded a new version of File:Cheap woodturning tools.JPG (better lighting; tools in their holder)
- 13:49, 2 November 2018 Lukas talk contribs uploaded a new version of File:Bandsaw guide position - side view.png (explanation integrated into picture)
- 13:35, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw guide position - side view.png (positioning of bandsaw blade guides: * |ab| = 0.5 to 1 mm * |cd| > |ab| annotated with Inkscape)
- 12:49, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw teeth position on flat wheels.JPG (Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca...)
- 12:39, 2 November 2018 Lukas talk contribs uploaded File:Wiki media creation.JPG (two members creating media for our page on jigsaws)
- 23:55, 31 October 2018 Lukas talk contribs uploaded File:Leimbinder.JPG (a beam of glued laminated timber in a hardware store)
- 17:35, 31 October 2018 Lukas talk contribs uploaded a new version of File:VHS couch table legs finished.JPG (4:3 aspect ratio for Main Page/Slideshow)
- 18:34, 27 October 2018 Lukas talk contribs uploaded a new version of File:Router table feed direction animation.GIF (low resolution - should allow animated thumbnails)
- 22:42, 25 October 2018 Lukas talk contribs uploaded File:Router table feed direction - fence.gif (low-resolution GIF animation of the proper feed direction for '''push cuts''' along the router table fence)
- 22:11, 25 October 2018 Lukas talk contribs uploaded File:Push block use.JPG ((fake) use of push blocks - press down firmly with both hands, but perhaps insert a bit for better routing results ;-))
- 22:03, 25 October 2018 Lukas talk contribs uploaded File:Making push blocks.JPG (gluing handles into a pair of push blocks, utilizing the offcuts to obtain an even clamping surface)
- 21:50, 25 October 2018 Lukas talk contribs uploaded File:Push blocks.JPG (two self-made push blocks to use with dangerous tools such as a router table, jointer or table saw)
- 22:02, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-4.JPG (finished digital file shredder - clearly a desktop accessory that every Maker needs!)
- 22:00, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-3.JPG (main case & inner works of the digital file shredder completed; power supply and baseplate still missing)
- 21:58, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-2.JPG (most of the components for the digital file shredder are embedded into a 3D printed case after pausing the print at the appropriate time)
- 21:53, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-1.JPG (rough assembly of the electronics for a small "file shredder" that formats SD cards!)
- 21:48, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-0.JPG (a small "file shredder" that formats SD cards!)
- 21:27, 23 October 2018 Lukas talk contribs deleted page Plenum/Meeting minutes/2018-11 02 (unused redirect; content was: "#REDIRECT Plenum/Meeting minutes/2018-11-02", and the only contributor was "NitramLegov" (talk))
- 20:20, 23 October 2018 Lukas talk contribs uploaded File:Screenshot - Inkscape.PNG (screenshot of a typical Inkscape project (in this case: drawing wiki illustrations of woodturning tools))
- 17:34, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction.png (Basic schematic of the proper feed direction on a router table, resulting in safe climb cuts whichever side of the bit you are working on. Drawn in Inkscape, also see animated version: [[:File:Router table feed direction animation...)
- 17:24, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction animation.GIF (10 fps animation of the proper feed direction on a router table - only push cuts should be made! drawn in Inkscape, animated with GIMP)
- 17:44, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table off center.JPG (When we got the Westfalia router table, the router was mounted too far to the front so the bit would be off center - not that the scale on this simple table would have been too accurate anyway, but something we will fix nevertheless!)
- 17:41, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table fence-top.JPG (In addition to the fence, you should use additional guides on the router table whenever you can - shown here is a rigid top guide ''almost'' touching the workpiece, featherboards can actually press on it and are even safer!)
- 17:37, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table fence-X.JPG (The screw knob marked "X" should be left alone unless you really need it - it lets you move the left part of the fence back and forward on its own; for the majority of jobs on the router table (if not all) you want the fence to be perf...)
- 17:31, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table dust ports.JPG (there are two places where you can connect a shop vac to the Westfalia router table: top (green) - most useful for edge work - or bottom (black) - most useful for grooves)
- 18:00, 18 October 2018 Lukas talk contribs moved page Handbohrmaschinen Einweisung to Handbohrmaschinen-Einweisung without leaving a redirect
- 17:42, 18 October 2018 Lukas talk contribs deleted page 3D Druckern (unnötiger redirect, content was: "#REDIRECTPrusa i3 MK2S", and the only contributor was "Lmnl99" (talk))
- 23:48, 17 October 2018 User account Blacksheep talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 16:39, 13 October 2018 Lukas talk contribs uploaded File:Bosch EXPO2000.JPG (a Bosch EXPO2000 jigsaw in its case)
- 15:52, 13 October 2018 Lukas talk contribs deleted page Druckerhandbuch (Broken redirect: content was: "#REDIRECT[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf printers' manual]", and the only contributor was "Lmnl99" (talk))
- 17:21, 8 October 2018 Lukas talk contribs moved page Caulking Gun to Caulking Guns
- 17:10, 8 October 2018 Lukas talk contribs moved page Area Patron to Area Patrons
- 21:45, 30 September 2018 Lukas talk contribs uploaded File:File handles 12.JPG (a self-made file handle next to an "original" one)
- 21:44, 30 September 2018 Lukas talk contribs uploaded File:File handles 11.png (do NOT use a hammer to drive the file into a (self-made) file handle - the hardened steel could break - but instead push it in as far as you can and then hit the workbench surface with the handle's end a few times photo edited...)
- 21:29, 30 September 2018 Lukas talk contribs uploaded File:File handles 10.JPG (for drilling the hole in a self-made file handle, a stepped approach may be best but a first attempt with a drill bit about half the diameter of the thickest file shaft part was also successful)
- 21:26, 30 September 2018 Lukas talk contribs uploaded File:File handles 09.JPG (taking a self-made file handle off the wood lathe: you could do ''some'' of the work with a parting tool, but using a sharp saw with the lathe turned off is the safest way)
- 21:23, 30 September 2018 Lukas talk contribs uploaded File:File handles 08.JPG (Sanding on the wood lathe is awesome! Here, a self-made file handle gets its final touch)
- 21:20, 30 September 2018 Lukas talk contribs uploaded File:File handles 07.JPG (now it really looks like a self-made file handle: a groove has been formed with a skew chisel where it will feel comfortable)
- 20:42, 30 September 2018 Lukas talk contribs uploaded File:File handles 06.JPG (the blank for a self-made file handle is taking shape after some further smoothing with a skew chisel)
- 20:35, 30 September 2018 Lukas talk contribs uploaded File:File handles 05.JPG (a self-made file handle in progress: after roughing out a cylinder, a parting tool is used to get the proper diameter for a ferrule)
- 20:33, 30 September 2018 Lukas talk contribs uploaded File:File handles 04.JPG (turning blank for a self-made file handle set up between centers on the wood lathe)
- 19:16, 30 September 2018 Lukas talk contribs uploaded File:File handles 03.JPG (cutting a turning blank for a self-made file handle with a Japanese saw)
- 19:13, 30 September 2018 Lukas talk contribs uploaded File:File handles 02.JPG (measuring the ferrule for a self-made file handle with digital calipers - here you can truly appreciate that they always take an identical measurement for inside and outside with their two pairs of probes!)
- 19:09, 30 September 2018 Lukas talk contribs uploaded File:File handles 01.jpg (cutting a ferrule for a self-made file handle from steel pipe with a hacksaw)
- 18:04, 30 September 2018 Lukas talk contribs uploaded File:File handles cover.JPG (a self-made file handle still on the wood lathe)
- 20:26, 28 September 2018 Lukas talk contribs uploaded File:Woodturning scraper.svg (Sketch to illustrate the geometry of a woodturning scraper (b: bevel angle). Drawn with Inkscape.)
- 20:05, 28 September 2018 Lukas talk contribs uploaded File:Skew chisel.svg (Sketch to illustrate the geometry of a skew chisel (b: bevel angle, s: skew angle). Drawn with Inkscape.)
- 19:40, 28 September 2018 Lukas talk contribs uploaded File:Spindle gouge.svg (Sketch to illustrate the geometry of a spindle gouge (b: bevel angle). Drawn with Inkscape.)
- 19:31, 28 September 2018 Lukas talk contribs uploaded File:Roughing gouge.svg (Sketch to illustrate the geometry of a roughing gouge (b: bevel angle). Drawn with Inkscape.)
- 19:26, 28 September 2018 Lukas talk contribs uploaded a new version of File:Fingernail bowl gouge.svg (square version)
- 19:25, 28 September 2018 Lukas talk contribs uploaded a new version of File:Bowl gouge.svg (square version)
- 19:21, 28 September 2018 Lukas talk contribs uploaded File:Bowl gouge.svg (Sketch to illustrate the geometry of a bowl gouge (b: bevel angle). Drawn with Inkscape.)
- 19:13, 28 September 2018 Lukas talk contribs uploaded File:Fingernail bowl gouge.svg (Sketch to illustrate the geometry of a "fingernail" bowl gouge (b: bevel angle). Drawn with Inkscape.)
- 21:33, 27 September 2018 Lukas talk contribs uploaded File:VHS table 08.jpg (both VHS couch table legs finished and in front of their couch)
- 21:30, 27 September 2018 Lukas talk contribs uploaded File:VHS table 07.JPG (the top board of a VHS couch table leg is made of two carefully laid out pieces to give a bit of extra stability from the inside and let each leg double as a side table when the large top is removed)
- 21:27, 27 September 2018 Lukas talk contribs uploaded File:VHS table 06.jpg (finished tape assembly for a VHS couch table leg)
- 21:25, 27 September 2018 Lukas talk contribs uploaded File:VHS table 05.JPG (to connect the different layers of VHS couch table legs with rivets, makeshift brackets out of some surplus tapes proved efficient (and nearly invisible in the end))
- 21:21, 27 September 2018 Lukas talk contribs uploaded File:VHS table 04.JPG (Fifth and most complicated layer of a VHS couch table leg: two sets of two sandwiched tapes and four single ones standing on their short edge, forming something like a rectangle. This weird arrangement was necessary to gain...)
- 21:20, 27 September 2018 Lukas talk contribs uploaded File:VHS table 03.JPG (third and fourth layer of a VHS couch table leg: two tapes lying flat (they will be hidden later, don't choose your favorite ones) on top of another ring as was also used for the second layer)
- 21:18, 27 September 2018 Lukas talk contribs uploaded File:VHS table 02.JPG (the second layer of a VHS couch table leg: four tapes on their long edge (labels nicely visible!))
- 21:18, 27 September 2018 Lukas talk contribs uploaded File:VHS table 01.JPG (assembling four VHS tapes in a square with a rivet gun - this will be the base of a couch table leg)
- 00:30, 27 September 2018 User account Andy talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 23:58, 26 September 2018 User account Axel talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 12:14, 25 September 2018 Lukas talk contribs moved page Dining Room Table to Project:Dining Room Table
- 15:32, 23 September 2018 Lukas talk contribs moved page Lathe Tool to Lathe Tools
- 13:58, 23 September 2018 Lukas talk contribs moved page Welding Curtains to Welding Enclosure
- 17:43, 20 September 2018 Lukas talk contribs uploaded File:Coming soon.svg (placeholder for missing project photos, e.g. on your user page quickly created with Inkscape.)
- 01:12, 20 September 2018 User account Josh talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 16:23, 14 September 2018 Lukas talk contribs uploaded File:Dauerleihgabe.pdf (Vereinbarung über Dauerleihgaben an den CoMakingSpace - ''agreement for permanent loans to the CoMakingSpace'')
- 21:16, 12 September 2018 Lukas talk contribs uploaded File:Bosch PFZ 700 PE.JPG (Bosch PFZ 700 PE reciprocating saw in its case, along with some blades)
- 18:54, 12 September 2018 Lukas talk contribs uploaded File:Tacklife PAH01D.JPG (Tacklife PAH01D welding helmet sitting on its bag)
- 17:34, 23 August 2018 Lukas talk contribs moved page CNC Routing to Category:CNC Routing (oops..)
- 01:02, 16 August 2018 User account Narquadah talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:30, 16 August 2018 User account Chiara talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:18, 16 August 2018 User account Nati talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:10, 5 August 2018 Lukas talk contribs uploaded File:Sticky, stringy.jpg (pulling on some old adhesives holding a machine's feet)
- 02:38, 5 August 2018 Lukas talk contribs deleted page File:King Craft WS-125.jpg (Deleted to make way for move from "File:Disc grinder.JPG")
- 02:38, 5 August 2018 Lukas talk contribs moved page File:Disc grinder.JPG to File:King Craft WS-125.jpg without leaving a redirect (oops, it pays to check existing files before uploading new ones...)
- 02:33, 5 August 2018 Lukas talk contribs uploaded File:King Craft WS-125.jpg (King Craft WS-125 disc grinder)
- 02:15, 5 August 2018 Lukas talk contribs uploaded File:Alpha Tools WS 960-125.jpg (Alpha Tools WS 960/125 disc grinder)
- 01:46, 5 August 2018 Lukas talk contribs uploaded File:M3 to M12 taps.jpg (M3 to M12 set of three-stage taps)
- 01:44, 5 August 2018 Lukas talk contribs uploaded File:M3 to M12 dies.jpg (set of M3 to M12 dies with their box and holder)
- 01:41, 5 August 2018 Lukas talk contribs uploaded File:Taps and dies.JPG (a selection of our taps and dies and their respective holders)
- 18:38, 3 August 2018 Lukas talk contribs moved page Microfluidics to Project:Microfluidics
- 00:51, 2 August 2018 User account Flor talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 22:52, 1 August 2018 Lukas talk contribs uploaded File:Paper cutter.JPG (our 2 in 1 paper cutter (with its knife side in use))
- 20:15, 1 August 2018 Lukas talk contribs uploaded File:Precious plastic shredder parts.jpg (laser cut parts for our Precious Plastic shredder photo by Flor)
- 06:35, 28 July 2018 User account Tuxinator talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 19:00, 25 July 2018 Lukas talk contribs moved page Precious Plastic to Project:Precious Plastic
- 18:34, 23 July 2018 User account Susanna talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:48, 20 July 2018 Lukas talk contribs uploaded File:Drying timber variety.JPG (a bunch of logs (cherry and ash are in there, not sure about the others right now) treated with different drying methods so they can be used for projects at some point)
- 18:35, 20 July 2018 Lukas talk contribs uploaded File:Aq-edge working prototype.JPG (first working prototype of Project:Aquarium Edge Illumination)
- 18:29, 20 July 2018 Lukas talk contribs uploaded File:LED strip circuit Steckplatine.png (circuit to control four LED strips with an Arduino - not fully functional though, the pulldown resistors don't seem to have any effect?! part of Project:Aquarium Edge Illumination; image created with Fritzing)
- 16:47, 19 July 2018 Lukas talk contribs uploaded File:Familienmitgliedschaft.pdf (brand-new family membership option!)
- 16:43, 19 July 2018 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf (updated & restructured, hopefully less confusing ;-))
- 00:06, 19 July 2018 User account Kai talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:15, 12 July 2018 User account LokowandtG talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 20:35, 11 July 2018 Lukas talk contribs uploaded File:Milling styrofoam.JPG (a small block of styrofoam gets machined on an "EleksMill" CNC mill)
- 20:33, 11 July 2018 Lukas talk contribs uploaded File:EleksMill.jpg (Mitja's "EleksMill" CNC mill on a table)
- 15:07, 10 July 2018 Lukas talk contribs uploaded File:Corroding magnets.JPG (two corroding neodymium magnets next to an intact one (on the left))
- 15:03, 8 July 2018 Lukas talk contribs uploaded File:CNC router.gif (WorkBee CNC router cutting a circular pocket into a piece of eukalyptus glued laminated timber. GIF created with [https://giphy.com/create/gifmaker Giphy].)
- 13:30, 8 July 2018 Lukas talk contribs uploaded File:CNC workholding - wood screws.JPG (driving wood screws through your workpiece and into the spoilboard is a very simple CNC workholding option)
- 21:33, 7 July 2018 Lukas talk contribs moved page Scale to Scales (forgot the tiny one)
- 09:59, 7 July 2018 Lukas talk contribs deleted page Wanted:Jigsaw (Broken redirect: double redirect with no links to it --- content was: "#REDIRECT Jigsaw", and the only contributor was "Mitja" (talk))
- 18:40, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-6.JPG (sanding the chamfer on a pizza peel with a sanding block to get a smooth surface)
- 18:38, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-5.JPG (forming the front chamfer of a pizza peel with a rasp)
- 18:38, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-4.JPG (sanding the edge of a freshly cut pizza peel with an old sanding disc)
- 18:36, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-3.JPG (pizza peel cut out on the scroll saw)
- 18:31, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-2.JPG (cutting a pizza peel from a sheet of multi-ply on the scroll saw)
- 18:30, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-1.JPG (taping a pizza peel design to birch multi-ply before cutting)
- 18:26, 5 July 2018 Lukas talk contribs uploaded File:Pizzapeel-0.JPG ((probably) finished pizza peel from birch multi-ply)
- 20:54, 2 July 2018 Lukas talk contribs uploaded File:Clamping claw cross.JPG (a cross-like orientation of clamping claws secures your workpiece from all four sides when using the CNC router)
- 18:20, 30 June 2018 Lukas talk contribs moved page G-Code Sender to G-Code Senders
- 13:57, 30 June 2018 Lukas talk contribs moved page Gynny to (Archived) Gynny without leaving a redirect (website disappeared, along with our "project"...)
- 22:12, 20 June 2018 User account Max P. talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:23, 14 June 2018 User account JohannesG talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 10:35, 8 June 2018 Lukas talk contribs moved page Router to Routers (more to come)
- 02:35, 8 June 2018 Lukas talk contribs deleted page CNC Milling Machine (content was: "#REDIRECT Stepcraft")
- 00:13, 8 June 2018 Lukas talk contribs moved page Wanted:Eccentric Sander to Eccentric Sanders (got two that just need some fixing)
- 07:28, 4 June 2018 Lukas talk contribs uploaded File:Dishwasher.JPG (our dishwasher in the kitchen area)
- 07:26, 4 June 2018 Lukas talk contribs uploaded File:Kitchen cabinet.JPG (the bottom left kitchen cabinet, holding stuff like plates and cutlery)
- 07:21, 4 June 2018 Lukas talk contribs uploaded File:CoMakingSpace kitchen.JPG (our kitchen area with someone raiding the fridge)
- 07:07, 4 June 2018 Lukas talk contribs uploaded File:Snips vs plastic.JPG (although snips are usually used for sheet metal, they are also great for cutting tough plastic packaging!)
- 06:59, 4 June 2018 Lukas talk contribs uploaded File:PVC pieces.JPG (two small PVC pieces left over from making holddowns with the CNC router)
- 06:49, 4 June 2018 Lukas talk contribs uploaded File:Tangit PVC adhesive.JPG ("Tangit" cleaner and adhesive for PVC.)
- 06:03, 4 June 2018 Lukas talk contribs uploaded File:Table saw power supply.JPG (We strongly recommend to use this setup to power the table saw: outlet -> shop vac (set to "Auto") -> foot switch -> table saw. This makes sure the shop vac is automatically turned on with the saw and everything can quickly...)
- 10:30, 3 June 2018 Lukas talk contribs uploaded a new version of File:Two table saw fences.png (As described in the table saw introduction, DO NOT use both table saw fences at once or you could experience kickback! Photo edited with Inkscape.)
- 10:28, 3 June 2018 Lukas talk contribs uploaded File:Two table saw fences.png (As described in the table saw introduction, never use both table saw fences at once or you could experience kickback! Photo edited with Inkscape.)
- 02:55, 31 May 2018 User account Stefanr talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:05, 28 May 2018 Lukas talk contribs moved page Rust to Category:Rust
- 18:58, 23 May 2018 Lukas talk contribs moved page Jigsaw to Jigsaws (adding a second one soon)
- 14:04, 5 May 2018 User account Khaos8rood talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:43, 3 May 2018 Lukas talk contribs deleted redirect Hot Air Soldering Station by overwriting (Deleted to make way for move from "Wanted:Hot Air Soldering Station")
- 17:43, 3 May 2018 Lukas talk contribs moved page Wanted:Hot Air Soldering Station to Hot Air Soldering Station over a redirect without leaving a redirect (got it!)
- 19:13, 27 April 2018 User account Yunus Noah Oberst talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 19:08, 27 April 2018 User account Paul talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 19:01, 27 April 2018 User account Chris talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:25, 26 April 2018 Lukas talk contribs uploaded File:Screw head oval (raised).PNG (icon of an oval screw head (screenshot of a Tinkercad model) -> very similar: File:screw head countersunk.PNG and File:screw head round.PNG)
- 01:23, 26 April 2018 Lukas talk contribs uploaded File:Screw head hex+plate.PNG (icon of an external hex screw head with a "plate" (screenshot of a Tinkercad model))
- 01:22, 26 April 2018 Lukas talk contribs uploaded File:Screw head round.PNG (icon of a rounded screw head (screenshot of a Tinkercad model) -> very similar: File:screw head button.PNG)
- 01:21, 26 April 2018 Lukas talk contribs uploaded File:Screw head button.PNG (icon of a "button" screw head (screenshot of a Tinkercad model))
- 13:19, 17 April 2018 Lukas talk contribs uploaded File:SDS bits.JPG (some SDS chisel bits and drill bits for use with a rotary hammer)
- 13:14, 17 April 2018 Lukas talk contribs uploaded File:SDS drill bits.jpg (set of SDS drill bits to use with a rotary hammer)
- 23:00, 13 April 2018 User account Armin talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 11:04, 10 April 2018 Lukas talk contribs moved page Wanted:IFixit Pro Tech Toolkit to IFixit Pro Tech Toolkit over a redirect without leaving a redirect (got it!)
- 11:04, 10 April 2018 Lukas talk contribs deleted redirect IFixit Pro Tech Toolkit by overwriting (Deleted to make way for move from "Wanted:IFixit Pro Tech Toolkit")
- 02:00, 5 April 2018 User account Fiohoerenz talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 20:36, 4 April 2018 Lukas talk contribs uploaded File:M radio antenna.JPG (our M-shaped [Project:Roof Sign|antenna/sign on the roof], made windproof with two boxes of rocks)
- 20:28, 4 April 2018 Lukas talk contribs uploaded File:Photo table.JPG (Moritz taking a photo of a 3D printed screw on our photo table)
- 21:07, 3 April 2018 User account IssaAbbas talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 02:57, 30 March 2018 Lukas talk contribs moved page Project:Roif Sign to Project:Roof Sign without leaving a redirect (brain fart)
- 10:45, 22 March 2018 Lukas talk contribs moved page Inkjet Printer to Inkjet Printers
- 10:45, 22 March 2018 Lukas talk contribs moved page Laser Printer to Laser Printers
- 01:35, 22 March 2018 Lukas talk contribs uploaded File:Compressor oil level.JPG (oil level indicator on the Einhell Air Tech Euro 2200-1 compressor - the reading should always be between the top edge and the red dot)
- 01:33, 22 March 2018 Lukas talk contribs uploaded File:Hose drum.JPG (hose drum to connect pneumatics equipment)
- 01:31, 22 March 2018 Lukas talk contribs uploaded File:Tire filler.JPG (tire filler to use with pressurized air from a compressor)
- 01:24, 22 March 2018 Lukas talk contribs uploaded File:Blow gun.JPG (simple blow gun to use with pressurized air from a compressor)
- 01:22, 22 March 2018 Lukas talk contribs uploaded File:Einhell Air Tech Euro 2200-1.JPG ("Einhell Air Tech Euro 2200-1" compressor)
- 01:17, 22 March 2018 Lukas talk contribs uploaded File:Compressor outlets.JPG (the two outlets of our compressor: full pressure (up to 8 bar) on the right, decreased pressure (controlled by the black knob) on the left)
- 13:22, 21 March 2018 Lukas talk contribs uploaded File:Magnetic Knife Holder Done landscape.jpg ("Landscape" oriented crop of File:Magnetic Knife Holder Done.jpg, showing a magnetic knife holder. Original author: Patrick - edited with GIMP to fit into our [[Project:Wiki Slideshow|slideshow on the mai...)
- 13:22, 21 March 2018 Lukas talk contribs uploaded File:TBB done 4to3.jpg (4:3 aspect ratio crop of File:TBB done.jpg, showing a bicycle bell made from an old typewriter. Edited with GIMP to fit into our slideshow on the main page.)
- 13:21, 21 March 2018 Lukas talk contribs uploaded File:Roubo workbench 1-17 4to3.JPG (4:3 aspect ratio crop of File:Roubo workbench 1-17.JPG, showing the nearly finished "Roubo" style woodworking bench. Edited with GIMP to fit into our slideshow on the main page.)
- 10:17, 20 March 2018 Lukas talk contribs uploaded File:Satzungsziele.pdf (excerpt from the CoMakingSpace gGmbH's founding documents containing our charitable goals and the obligation to only use company money to help achieve these goals)
- 21:56, 19 March 2018 Lukas talk contribs uploaded File:First woodturning attempts.JPG (Taking our wood lathe for a first spin! You can tell from the appearance of the cuts that the tools were not exactly ''sharp'' at the time...)
- 21:39, 19 March 2018 Lukas talk contribs uploaded a new version of File:Printer-farm.jpg (3D printers now with more space!)
- 21:34, 19 March 2018 Lukas talk contribs uploaded File:Common room.JPG (our common room as seen from the CNC room)
- 21:29, 19 March 2018 Lukas talk contribs uploaded File:CNC room.JPG (as much of the CNC room as I could fit on one photo (mostly the CNC router))
- 18:21, 8 March 2018 Lukas talk contribs uploaded File:Instagram logo 2016.svg (Instagram logo - source & licensing: https://commons.wikimedia.org/wiki/File:Instagram_logo_2016.svg)
- 01:54, 8 March 2018 User account ErikSchatz talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:47, 8 March 2018 User account Mbinder talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:10, 6 March 2018 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf ((hopefully) fixed broken PDF)
- 04:01, 3 March 2018 Lukas talk contribs deleted redirect Hole Saws by overwriting (Deleted to make way for move from "Wanted:Hole Saws")