All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 10:31, 14 July 2019 Lukas talk contribs created page File:Captive rings 09.JPG (Project:Captive Ring Turning give the end knobs some shape until you're happy (don't take too much off the diameter!))
- 10:31, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 09.JPG (Project:Captive Ring Turning give the end knobs some shape until you're happy (don't take too much off the diameter!))
- 15:22, 13 July 2019 Lukas talk contribs created page File:Captive rings 08.JPG (Project:Captive Ring Turning this part was a bit scary (not tested beforehand): "planing" the middle section with the skew chisel while the rings are taped to the side)
- 15:21, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 08.JPG (Project:Captive Ring Turning this part was a bit scary (not tested beforehand): "planing" the middle section with the skew chisel while the rings are taped to the side)
- 15:20, 13 July 2019 Lukas talk contribs created page File:Captive rings 07.JPG (Project:Captive Ring Turning fast forward: two rings are cut! See "Project:Captive Ring Turning#Educative Failures" for more details on this part of the project)
- 15:20, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 07.JPG (Project:Captive Ring Turning fast forward: two rings are cut! See "Project:Captive Ring Turning#Educative Failures" for more details on this part of the project)
- 15:16, 13 July 2019 Lukas talk contribs created page File:Captive rings 06.JPG (Project:Captive Ring Turning burn marks are to be expected when using a self-made tool for this job - just make sure you don't generate enough heat to crack the wood!)
- 15:16, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 06.JPG (Project:Captive Ring Turning burn marks are to be expected when using a self-made tool for this job - just make sure you don't generate enough heat to crack the wood!)
- 15:13, 13 July 2019 Lukas talk contribs created page File:Captive rings 05.JPG (Project:Captive Ring Turning after defining its outer curve with a parting tool and then a spindle gouge, the future ring is slowly undercut with the hook tool)
- 15:13, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 05.JPG (Project:Captive Ring Turning after defining its outer curve with a parting tool and then a spindle gouge, the future ring is slowly undercut with the hook tool)
- 09:44, 13 July 2019 Lukas talk contribs created page File:Captive rings 04.JPG (Project:Captive Ring Turning sketching the dimensions of the first elements: end knob, gap, ring (1/2 gap width), gap)
- 09:44, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 04.JPG (Project:Captive Ring Turning sketching the dimensions of the first elements: end knob, gap, ring (1/2 gap width), gap)
- 09:40, 13 July 2019 Lukas talk contribs created page File:Captive rings 03.JPG (Project:Captive Ring Turning first step in pretty much any woodturning project: roughing)
- 09:40, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 03.JPG (Project:Captive Ring Turning first step in pretty much any woodturning project: roughing)
- 09:37, 13 July 2019 Lukas talk contribs created page File:Captive rings 01.JPG (Project:Captive Ring Turning the apple log was dried quite nicely and only had two superficial cracks)
- 09:37, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 01.JPG (Project:Captive Ring Turning the apple log was dried quite nicely and only had two superficial cracks)
- 02:48, 13 July 2019 Lukas talk contribs created page Hex Key (Redirected page to Hex Keys) Tag: New redirect
- 02:44, 13 July 2019 Lukas talk contribs created page File:Captive rings - test13.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) - a ring! and it's captive!)
- 02:44, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test13.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) - a ring! and it's captive!)
- 02:41, 13 July 2019 Lukas talk contribs created page File:Captive rings - test12.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test12.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs created page File:Captive rings - test11.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test11.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:40, 13 July 2019 Lukas talk contribs created page File:Captive rings - test10.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:40, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test10.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:38, 13 July 2019 Lukas talk contribs created page File:Captive rings - test09.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:38, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test09.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:35, 13 July 2019 Lukas talk contribs created page File:Captive rings - test08.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:35, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test08.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:34, 13 July 2019 Lukas talk contribs created page File:Captive rings - test07.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:34, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test07.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:29, 13 July 2019 Lukas talk contribs created page File:Captive rings - test06.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - defining the ring with a spindle gouge)
- 02:29, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test06.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - defining the ring with a spindle gouge)
- 02:25, 13 July 2019 Lukas talk contribs created page File:Captive rings - test05.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel)
- 02:25, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test05.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel)
- 02:22, 13 July 2019 Lukas talk contribs created page Property:Tutor (Created page with "Have a look at "Tutors" for an explanation of our introduction system! Has type::Page")
- 02:14, 13 July 2019 Lukas talk contribs created page File:Captive rings - test04.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:14, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test04.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:08, 13 July 2019 Lukas talk contribs created page File:Captive rings - test03.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:08, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test03.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:00, 13 July 2019 Lukas talk contribs created page File:Captive rings - test02.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:00, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test02.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:59, 13 July 2019 Lukas talk contribs created page File:Captive rings - test01.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:59, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test01.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:40, 13 July 2019 Lukas talk contribs created page Spindle Gouges (Redirected page to Woodturning Tools#Spindle Gouges) Tag: New redirect
- 01:39, 13 July 2019 Lukas talk contribs created page Spindle Gouge (Redirected page to Woodturning Tools#Spindle Gouges) Tag: New redirect
- 01:25, 13 July 2019 Lukas talk contribs created page Project:Captive Ring Turning (first gallery up)
- 01:10, 13 July 2019 Lukas talk contribs created page File:Hook tool 9.JPG (Project:Captive Ring Turning#Making the Hook Tool finally grind a scraping tip onto the (former) hex key)
- 01:10, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 9.JPG (Project:Captive Ring Turning#Making the Hook Tool finally grind a scraping tip onto the (former) hex key)
- 01:06, 13 July 2019 Lukas talk contribs created page File:Hook tool 8.JPG (Project:Captive Ring Turning#Making the Hook Tool amazing what you can still make out of a little bit of junk! (rest of the scrap wood for comparison))
- 01:06, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 8.JPG (Project:Captive Ring Turning#Making the Hook Tool amazing what you can still make out of a little bit of junk! (rest of the scrap wood for comparison))
- 01:03, 13 July 2019 Lukas talk contribs created page File:Hook tool 7.JPG (Project:Captive Ring Turning#Making the Hook Tool the hex key and ferrule should be glued in place with epoxy)
- 01:03, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 7.JPG (Project:Captive Ring Turning#Making the Hook Tool the hex key and ferrule should be glued in place with epoxy)
- 00:59, 13 July 2019 Lukas talk contribs created page File:Hook tool 6.JPG (Project:Captive Ring Turning#Making the Hook Tool a sturdy tailstock on the wood lathe can help to press the ferrule onto the tool handle)
- 00:59, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 6.JPG (Project:Captive Ring Turning#Making the Hook Tool a sturdy tailstock on the wood lathe can help to press the ferrule onto the tool handle)
- 00:55, 13 July 2019 Lukas talk contribs created page File:Hook tool 5.JPG (Project:Captive Ring Turning#Making the Hook Tool make the handle rather long - like all woodturning tools, it should provide good leverage)
- 00:55, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 5.JPG (Project:Captive Ring Turning#Making the Hook Tool make the handle rather long - like all woodturning tools, it should provide good leverage)
- 00:50, 13 July 2019 Lukas talk contribs created page File:Hook tool 4.JPG (Project:Captive Ring Turning#Making the Hook Tool once the handle is turned round, the ferrule can be used to determine the shoulder position)
- 00:50, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 4.JPG (Project:Captive Ring Turning#Making the Hook Tool once the handle is turned round, the ferrule can be used to determine the shoulder position)
- 00:40, 13 July 2019 Lukas talk contribs created page File:Hook tool 3.JPG (Project:Captive Ring Turning#Making the Hook Tool a brace is very useful to pre-drill the center hole on a woodturning blank)
- 00:40, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 3.JPG (Project:Captive Ring Turning#Making the Hook Tool a brace is very useful to pre-drill the center hole on a woodturning blank)
- 00:24, 13 July 2019 Lukas talk contribs created page File:Hook tool 2.JPG (the first step of most tool handle woodturning projects is the ferrule - e.g. cut with a pipe cutter)
- 00:24, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 2.JPG (the first step of most tool handle woodturning projects is the ferrule - e.g. cut with a pipe cutter)
- 17:06, 11 July 2019 Lukas talk contribs created page QR-Codes (Redirected page to QR Code) Tag: New redirect
- 17:06, 11 July 2019 Lukas talk contribs created page File:Rex laminator.JPG (our laminator laminating some laminated QR-Codes)
- 17:06, 11 July 2019 Lukas talk contribs uploaded File:Rex laminator.JPG (our laminator laminating some laminated QR-Codes)
- 17:05, 11 July 2019 Lukas talk contribs created page Electronic Protractor (Redirected page to Goniometer) Tag: New redirect
- 17:04, 11 July 2019 Lukas talk contribs created page Digital Protractor (Redirected page to Goniometer) Tag: New redirect
- 17:03, 11 July 2019 Lukas talk contribs uploaded a new version of File:Disc grinder vs steel.JPG (cropped for better focus on the machine)
- 14:06, 11 July 2019 Lukas talk contribs uploaded a new version of File:LED strip circuit Steckplatine.png (fixed wrong wiring at bottom MOSFET)
- 19:51, 10 July 2019 User account F.Huchinson talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:26, 5 July 2019 Lukas talk contribs created page Project:Skibogen (Created page with "{{ProjectInfoBox |project title=Bogen aus alten Ski |image= |status=Materialsammlung |date= |initiator=Lukas |team=Gesa |materials=Langlaufski (Recyclingkaufhaus), Holzr...")
- 02:31, 4 July 2019 User account Ward.Joumaa.90 talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 02:24, 4 July 2019 User account Unknown user talk was created by Lukas talk contribs and password was sent by email (new member!)
- 02:22, 4 July 2019 User account Unknown user talk was created by Lukas talk contribs and password was sent by email (new member!)
- 02:15, 4 July 2019 User account WALIDKHAN talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 20:19, 3 July 2019 Lukas talk contribs created page Extrusions (Redirected page to Material:Aluminum Extrusions) Tag: New redirect
- 00:10, 3 July 2019 Lukas talk contribs created page Laminator (mainly commissioning so far)
- 23:52, 2 July 2019 Lukas talk contribs created page Laminiergerät (Redirected page to Laminator) Tag: New redirect
- 17:47, 1 July 2019 Lukas talk contribs moved page Wanted:Foam Cutter to Foam Cutter over redirect (in commissioning)
- 17:47, 1 July 2019 Lukas talk contribs deleted redirect Foam Cutter by overwriting (Deleted to make way for move from "Wanted:Foam Cutter")
- 22:26, 30 June 2019 Lukas talk contribs created page Backsaw (Redirected page to Backsaws) Tag: New redirect
- 12:24, 30 June 2019 Lukas talk contribs created page Rasp Bits (Created page with "{{ToolInfoBox |tool name=Rasp Bits |image= |synonyms=rotary rasps;<br>DE: Freihandfräser, Rotationsraspeln, Rotor-Raspeln |type= |status= |material=wood |used with=Dril...")
- 22:55, 29 June 2019 Lukas talk contribs protected Template:PR-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:55, 29 June 2019 Lukas talk contribs protected Template:Financial-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:54, 29 June 2019 Lukas talk contribs protected Template:Community-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:54, 29 June 2019 Lukas talk contribs protected Template:Inventory-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 11:01, 29 June 2019 Lukas talk contribs created page Semantic MediaWiki (Created page with "We started using [https://www.semantic-mediawiki.org/wiki/Semantic_MediaWiki Semantic MediaWiki (SMW)] for some "smart" functions of this wiki around June 2019. Feel free to j...")
- 10:44, 29 June 2019 Lukas talk contribs created page SMW (Redirected page to Semantic MediaWiki) Tag: New redirect
- 09:53, 29 June 2019 Lukas talk contribs created page Schwingtier (Redirected page to Project:Swinging Puffin) Tag: New redirect
- 09:52, 29 June 2019 Lukas talk contribs moved page Project:Swinging-puffin to Project:Swinging Puffin (as written in the InfoBox, spaces in page titles are okay ;-))
- 18:49, 28 June 2019 Lukas talk contribs created page Metal Workshop/Gallery (Created page with "'''SANDBOX MODE - ignore this page if you're just browsing ;-)''' ''If you're interested, see [https://github.com/comakingspace/do-something/issues/130 do-something #130]''...")
- 17:27, 27 June 2019 Lukas talk contribs created page File:Wrong sandpaper choice.png (Do NOT use sanders with part of their velcro pad exposed! If there is no matching sandpaper, please buy some or use a different machine.)
- 17:27, 27 June 2019 Lukas talk contribs uploaded File:Wrong sandpaper choice.png (Do NOT use sanders with part of their velcro pad exposed! If there is no matching sandpaper, please buy some or use a different machine.)
- 17:25, 27 June 2019 Lukas talk contribs created page File:Drill press brain slug.JPG (to use an inclinometer on the drill press, you'll have to reference to the drill bit or chuck and move the table)
- 17:25, 27 June 2019 Lukas talk contribs uploaded File:Drill press brain slug.JPG (to use an inclinometer on the drill press, you'll have to reference to the drill bit or chuck and move the table)
- 17:24, 27 June 2019 Lukas talk contribs created page File:Inclinometer.JPG (inclinometer on our absolutely level common room table :-P)
- 17:24, 27 June 2019 Lukas talk contribs uploaded File:Inclinometer.JPG (inclinometer on our absolutely level common room table :-P)
- 17:18, 27 June 2019 Lukas talk contribs created page Borrowable (Redirected page to Category:Borrowable) Tag: New redirect
- 17:16, 27 June 2019 Lukas talk contribs created page File:Sheet sander motion.png (schematic of a sheet sander's movement pattern drawn with Inkscape)
- 17:16, 27 June 2019 Lukas talk contribs uploaded File:Sheet sander motion.png (schematic of a sheet sander's movement pattern drawn with Inkscape)
- 17:13, 27 June 2019 Lukas talk contribs created page Sander (Redirected page to Category:Sanders) Tag: New redirect
- 17:11, 27 June 2019 Lukas talk contribs created page File:Disc sander test.JPG (first test of our self-made lathe-mounted disc sander using the lathe's tool rest as a table)
- 17:11, 27 June 2019 Lukas talk contribs uploaded File:Disc sander test.JPG (first test of our self-made lathe-mounted disc sander using the lathe's tool rest as a table)
- 17:09, 27 June 2019 Lukas talk contribs created page Axe (Redirected page to Hatchet) Tag: New redirect
- 17:08, 27 June 2019 Lukas talk contribs created page Axt (Redirected page to Hatchet) Tag: New redirect
- 17:08, 27 June 2019 Lukas talk contribs created page Beil (Redirected page to Hatchet) Tag: New redirect
- 17:07, 27 June 2019 Lukas talk contribs created page Hatchet (Created page with "{{ToolInfoBox |tool name=Hatchet |image=ice pop hatchet.JPG |synonyms="axe"; DE: Beil, "Axt" |type= |status= |material=wood |used with= |location=Location::Wood Workshop...")
- 17:07, 27 June 2019 Lukas talk contribs created page File:Ice pop hatchet.JPG (putting a hatchet to good use in the summer...)
- 17:07, 27 June 2019 Lukas talk contribs uploaded File:Ice pop hatchet.JPG (putting a hatchet to good use in the summer...)
- 03:33, 27 June 2019 Lukas talk contribs moved page Glass Cutter to Glass Cutters
- 01:15, 27 June 2019 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf (updated MwSt (7% now!))
- 01:14, 27 June 2019 Lukas talk contribs uploaded a new version of File:Familienmitgliedschaft.pdf (updated MwSt (7% now!))
- 19:13, 26 June 2019 Lukas talk contribs created page Digital Level Box (Redirected page to Inclinometer) Tag: New redirect
- 18:22, 26 June 2019 Lukas talk contribs created page Angle Grinder Introduction (Redirected page to Disc Grinder Introduction) Tag: New redirect
- 17:15, 26 June 2019 Lukas talk contribs created page Chainsaw (quick safety brain dump; more news after the weekend)
- 23:12, 25 June 2019 Lukas talk contribs created page Permanent Marker (Redirected page to Markers) Tag: New redirect
- 21:46, 25 June 2019 Lukas talk contribs created page Myford ML7 (Redirected page to Metal Lathes#Myford ML7) Tag: New redirect
- 21:27, 25 June 2019 Lukas talk contribs created page Fuchsschwänze (Redirected page to Crosscut Saws) Tag: New redirect
- 21:24, 25 June 2019 Lukas talk contribs moved page Crosscut Saw to Crosscut Saws (pluralized)
- 17:21, 25 June 2019 Lukas talk contribs created page File:Slicer-Schema.PNG (simplified schematic of a 3D model being "sliced" into layers by a slicer (screenshot of a Tinkercad model))
- 17:21, 25 June 2019 Lukas talk contribs uploaded File:Slicer-Schema.PNG (simplified schematic of a 3D model being "sliced" into layers by a slicer (screenshot of a Tinkercad model))
- 17:19, 25 June 2019 Lukas talk contribs created page PrusaSlicer (Created page with "{{SoftwareInfoBox |software name=PrusaSlicer |image= |type=slicer |platform=Windows, Mac, Linux |license=[https://github.com/prusa3d/PrusaSlicer/blob/master/LICENSE GNU Af...")
- 17:17, 25 June 2019 Lukas talk contribs created page Slicer (Redirected page to Category:Slicers) Tag: New redirect
- 17:15, 25 June 2019 Lukas talk contribs created page Template:PR-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''PR''' manager(s) and is easily updated when responsibilities change. To use...")
- 17:15, 25 June 2019 Lukas talk contribs created page Template:Financial-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''financial''' manager(s) and is easily updated when responsibilities change....")
- 17:15, 25 June 2019 Lukas talk contribs created page Template:Community-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''community''' manager(s) and is easily updated when responsibilities change....")
- 17:12, 25 June 2019 Lukas talk contribs created page Borrowed (Redirected page to Category:Borrowable) Tag: New redirect
- 17:11, 25 June 2019 Lukas talk contribs created page Category:Borrowable (Created page with "If we have more of a certain tool or machine type than we can efficiently use at the Space, they usually gather dust in the storage room until they are needed...")
- 17:08, 25 June 2019 Lukas talk contribs created page Template:Inventory-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''inventory''' manager(s) and is easily updated when responsibilities change....")
- 17:07, 25 June 2019 Lukas talk contribs created page File:DeWalt DW411.JPG ("DeWalt DW411" sheet sander on a partially sanded board)
- 17:07, 25 June 2019 Lukas talk contribs uploaded File:DeWalt DW411.JPG ("DeWalt DW411" sheet sander on a partially sanded board)
- 16:56, 24 June 2019 Lukas talk contribs moved page Precious Plastics Corner to Precious Plastic Corner without leaving a redirect
- 18:02, 17 June 2019 Lukas talk contribs created page User talk:Hanna (Created page with "== Standing Desk == I may also be interested in upgrading my desk, do you already have a design in mind? Maybe we can help each other with the build :-) --~~~~")
- 17:11, 17 June 2019 Lukas talk contribs created page Tool (Redirected page to Category:Tools) Tag: New redirect
- 15:56, 14 June 2019 Lukas talk contribs created page Category:Tools (intro based on "Hand Tools", rewritten to replace that category)
- 17:24, 13 June 2019 Lukas talk contribs created page Inclinometer (coming soon!)
- 17:12, 13 June 2019 Lukas talk contribs created page Schreinerwerkstatt (Redirected page to Wood Workshop) Tag: New redirect
- 17:11, 13 June 2019 Lukas talk contribs created page Holzwerkstatt (Redirected page to Wood Workshop) Tag: New redirect
- 17:11, 13 June 2019 Lukas talk contribs created page Schlosserwerkstatt (Redirected page to Metal Workshop) Tag: New redirect
- 17:11, 13 June 2019 Lukas talk contribs created page Metallwerkstatt (Redirected page to Metal Workshop) Tag: New redirect
- 10:28, 9 June 2019 Lukas talk contribs uploaded File:Membership-icon.svg (Icon made by [https://www.freepik.com/" Freepik] from [https://www.flaticon.com/ Flaticon] is licensed by [http://creativecommons.org/licenses/by/3.0/ Creative Commons BY 3.0])
- 09:55, 9 June 2019 Lukas talk contribs uploaded File:Wheel truing stand.JPG (Moritz donated a wheel truing stand to increase our scope of cycling related projects!)
- 09:48, 9 June 2019 Lukas talk contribs uploaded File:Horizontal bike repair.JPG (bike held up horizontally by the bike repair stand on the frame and a vise (barely visible) on the crank ''(Kurbel)'')
- 09:31, 9 June 2019 Lukas talk contribs uploaded File:Bike repair stand.JPG (our bike repair stand in the metal workshop)
- 09:29, 9 June 2019 Lukas talk contribs uploaded File:CoMS banner + bike.JPG (Besides its many other talents, the CoMakingSpace is also a great pleace for bicycle repairs and projects!)
- 09:30, 8 June 2019 Lukas talk contribs uploaded File:CoMS Model 2017-9-14.JPG (early version of Project:CoMS Model from 2017-9-14 (the night before we actually moved into Czernyring 15!))
- 02:04, 8 June 2019 Lukas talk contribs uploaded File:Sanding - furniture restoration.JPG (a very common use for handheld sanders is the preparation of aged surfaces before new paint is applied)
- 02:01, 8 June 2019 Lukas talk contribs uploaded File:Bierbankrettung Loch zu.JPG (after getting a very cheap "beer table" with a hole in it, I plugged it with a custom cut piece of fir and sanded it flush after the wood glue was dry)
- 01:55, 8 June 2019 Lukas talk contribs uploaded File:Eukalyptus saw handle rough shape.JPG (shaping a saw handle out of leftovers from my "TAC" boardgame - the naked blade cost me just a few cents in the ''Recyclingkaufhaus'' next door!)
- 20:02, 7 June 2019 User account Hanna talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:58, 7 June 2019 Lukas talk contribs uploaded File:Wood photo stand.png (simple but decorative holder for a wooden photo out of leftovers from my "TAC" boardgame)
- 17:48, 7 June 2019 Lukas talk contribs uploaded File:Festival radio 01.JPG (Project:Festival Radio The radio to be modified, a ''Studio'' Club 5007)
- 17:43, 7 June 2019 Lukas talk contribs uploaded File:Composting toilet from pallets.JPG (composting toilet built almost entirely from pallet wood and other recycled materials)
- 17:38, 7 June 2019 Lukas talk contribs uploaded File:Birgitts bible covers.JPG (decorative bible covers I helped Birgitt make: laser engraved patterns and "holy" water/soil under acrylic glass)
- 17:34, 7 June 2019 Lukas talk contribs uploaded File:Countersink wood drill bit holder.jpg (a very quick project for ease of transport: a block of wood in a little pouch I found somewhere, drilled to hold my countersink wood drill bits)
- 17:22, 7 June 2019 Lukas talk contribs uploaded File:Project wall border painting.JPG (Project Wall in the making: Keno and Johannes applied a decorative border with spray paint and laser cut stencils)
- 10:05, 4 June 2019 Lukas talk contribs uploaded File:Auger drill bit set.JPG (Set of 10-12-14-16-18-20 mm auger bits in a wooden box. Note the rough lead screws: these drill bits are only suitable for hand use in a brace!<sup> [https://www.feinewerkzeuge.de/G312247v.html]</sup>)
- 10:24, 30 May 2019 User account Eileen talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 23:45, 29 May 2019 Lukas talk contribs uploaded File:Götterbaum-Reststück.JPG (Project:Drying Timber leftover piece of Micha's "tree of heaven" log that Lukas will try to carve or turn when it is dry)
- 23:26, 29 May 2019 Lukas talk contribs uploaded File:Wood screw - sunk partial tapping.svg (Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or...)
- 22:39, 29 May 2019 Lukas talk contribs uploaded File:Rali Wechselklingenhobel.jpg ("Rali 220" repleaceable blade plane)
- 20:32, 29 May 2019 Lukas talk contribs uploaded File:T-shank jigsaw blade.jpg (T-shank jigsaw blade ''Stichsägeblatt mit T-Schaft'')
- 18:21, 29 May 2019 Lukas talk contribs uploaded File:Project wall preparation.jpg (Keno and Ciaran taking down the "Project Wall" door for painting)
- 23:38, 28 May 2019 Lukas talk contribs uploaded File:Laser-Tigerente 5.jpg (Project:Tigerente laser engraved variation, step 5: final assembly with waxed body & wheels)
- 23:35, 28 May 2019 Lukas talk contribs uploaded File:Laser-Tigerente 4.JPG (Project:Tigerente laser engraved variation, step 4: the wood darkens slightly due to the beeswax)
- 23:32, 28 May 2019 Lukas talk contribs uploaded File:Laser-Tigerente 3.JPG (Project:Tigerente laser engraved variation, step 3: apply beeswax with a heatgun and some rags or paper towels)
- 23:29, 28 May 2019 Lukas talk contribs uploaded File:Laser-Tigerente 2.JPG (Project:Tigerente laser engraved variation, step 2: test assembly after cutting (on the scroll saw as usual and drilling)
- 23:25, 28 May 2019 Lukas talk contribs uploaded File:Laser-Tigerente 1.JPG (Project:Tigerente laser engraved variation, step 1: engrave your design with a laser cutter)
- 23:19, 28 May 2019 Lukas talk contribs uploaded File:Eccentric sander motion.png (an eccentric sander in motion (with schematic drawn over in Inkscape because you can't actually see what's happening))
- 22:53, 28 May 2019 Lukas talk contribs uploaded File:Screw marking gauge.JPG (quick and dirty marking gauge made from a screw in a piece of scrap wood)
- 18:39, 28 May 2019 Lukas talk contribs uploaded File:Bessey Winkelspanner.jpg (two Bessey corner clamps (probably WS3) in use to assemble a simple cabinet Category:Furniture)
- 23:56, 18 May 2019 User account Siggi talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:46, 16 May 2019 User account Lars talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 14:26, 11 May 2019 User account Koxyz talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 15:09, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill einklappen.gif (Project:Schwenkgrill so einfach kann man den Grill zusammenklappen :-) (GIF mit [https://ezgif.com/ ezGIF.com] aus einem MP4-Video erstellt))
- 14:58, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 16.JPG (Project:Schwenkgrill letzter Schritt: Feuer drunter & guten Hunger!)
- 14:06, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 15.JPG (Project:Schwenkgrill nach einem fehlgeschlagenen Versuch mit Vorhanghaken wurden die Enden der Kette mit Schlüsselringen am Rost festgemacht (passende Karabiner wären noch besser))
- 14:04, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 14.JPG (Project:Schwenkgrill ein Stück Kette am Ende des Drahtseils kann zur Höhenverstellung an zwei Flügelmuttern verhakt werden)
- 14:02, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 13.JPG (Project:Schwenkgrill in die "W"-Bögen hineinragende Enden eines weiteren Stücks Bewehrungsstahl müssen abgeschnitten werden, um nicht im Weg zu sein)
- 13:58, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 12.JPG (Project:Schwenkgrill um das "W", das die Bewegung des Dreibeins am idealen Punkt stoppen soll, in der richtigen Position anzuschweißen, sollte man sich lieber ein paar helfende Hände holen...)
- 13:55, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 11.JPG (Project:Schwenkgrill Testaufbau zur Ausrichtung des "W"-Stücks)
- 13:33, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 10.JPG (Project:Schwenkgrill der Bewehrungsstahl wird in eine (ungefähr) symmetrische "W"-Form gebogen)
- 13:29, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 09.JPG (Project:Schwenkgrill mit einem Bohrschleifer können kleine rechteckige Aussparungen für die Umlenkrolle in das mittlere Rohr geschnitten werden)
- 13:26, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 08.JPG (Project:Schwenkgrill ein großer Stufenbohrer gibt einen ganz passablen handgeführten Entgrater ab...)
- 13:18, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 07.JPG (Project:Schwenkgrill die flachgedrückten Stellen werden mit einem Stufenbohrer weit aufgebohrt, um sich gut um die Gewindestange bewegen zu können)
- 13:16, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 06.JPG (Project:Schwenkgrill Die beiden äußeren Stahlrohre werden an einem Ende im Schraubstock flachgedrückt)
- 13:14, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 05.JPG (Project:Schwenkgrill Bohrlöcher in Metall am besten immer gleich entgraten, um sich nicht zu verletzen!)
- 13:12, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 04.JPG (Project:Schwenkgrill um in die Stahlrohre zu bohren sind ein Maschinenschraubstock und eine Tischverlängerung sinnvoll)
- 13:10, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 03.JPG (Project:Schwenkgrill die Umlenkrolle braucht eine Bohrung für die Gewindestange (am besten schön zentriert auf der Drechselbank))
- 13:04, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 02.JPG (Project:Schwenkgrill optional, aber cool: Umlenkrolle aus Buche drechseln)
- 12:58, 8 May 2019 Lukas talk contribs uploaded File:Schwenkgrill 01.JPG (Project:Schwenkgrill (fast) das gesamte Material zu Beginn)
- 20:48, 3 May 2019 User account Stefan talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:46, 3 May 2019 User account FATSUMO talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:26, 2 May 2019 Lukas talk contribs uploaded File:Abused woodturning tools.JPG (woodturning tools that were abused and bent :-()
- 17:15, 2 May 2019 Lukas talk contribs uploaded File:Panel carrying.JPG (using panel carriers to move a large workpiece out of the CoMaking room)
- 17:08, 2 May 2019 Lukas talk contribs uploaded File:Panel carriers.JPG (two panel carriers on a table)
- 16:57, 2 May 2019 Lukas talk contribs uploaded File:Fretsaws.JPG (two fretsaws (one without a blade) on the wall)
- 13:28, 1 May 2019 Lukas talk contribs moved page Wanted:Fretsaw to Fretsaws (donated two)
- 10:45, 21 April 2019 Lukas talk contribs moved page Metal Lathe to Metal Lathes (addition of a smaller one)
- 15:01, 17 April 2019 Lukas talk contribs uploaded File:Waxwrap5.JPG (Project:Beeswax Wrap the finished beeswax wrap can be cleaned with soapy water (not too hot!))
- 14:57, 17 April 2019 Lukas talk contribs uploaded File:Waxwrap4.JPG (Project:Beeswax Wrap The warmth of your hands should now be sufficient to shape your beeswax wrap around pretty much anything! If it doesn't keep its shape, add more wax.)
- 14:54, 17 April 2019 Lukas talk contribs uploaded File:Waxwrap3.JPG (Project:Beeswax Wrap place the beeswax-covered fabric between to sheets of baking paper and use a flatiron to melt the wax into it)
- 14:31, 17 April 2019 Lukas talk contribs uploaded File:Waxwrap2.JPG (Project:Beeswax Wrap spread the beeswax flakes onto a piece of cotton fabric)
- 14:28, 17 April 2019 Lukas talk contribs uploaded File:Waxwrap1.JPG (Project:Beeswax Wrap first of all, the beeswax needed to be shredded into workable pieces)
- 17:54, 4 April 2019 Lukas talk contribs moved page Navigationsgallerien to Navigationsgalerien without leaving a redirect (typo)
- 20:40, 25 March 2019 Lukas talk contribs moved page Level to Levels (pluralized)
- 01:15, 14 March 2019 Lukas talk contribs uploaded File:Schwenkgrill Vorbild.JPG (Project:Schwenkgrill Opas selbstgebauter Schwenkgrill, den ich in einigen Punkten kopieren möchte!)
- 00:22, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 6.JPG (turning wheels for a toy (Project:Tigerente) step 6: drill a perfectly centered hole using a drill chuck on the wood lathe!)
- 00:19, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 5.JPG (turning wheels for a toy (Project:Tigerente) step 5: sand off the central roughness, e.g. with a clamped-down belt sander (we did not have a disc sander yet))
- 00:17, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 4.JPG (turning wheels for a toy (Project:Tigerente) step 4: finish the parting cut off the lathe, using a Japanese saw for example)
- 00:13, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 3.JPG (turning wheels for a toy (Project:Tigerente) step 3: repeat parting until there are enough recognizable wheels)
- 00:11, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 2.JPG (turning wheels for a toy (Project:Tigerente) step 2: use a parting tool to define the wheels)
- 00:09, 9 March 2019 Lukas talk contribs uploaded File:Toy wheel turning 1.JPG (turning wheels for a toy (Project:Tigerente) step 1 (after your blank becomes round): mark what to keep/where to part)
- 23:51, 8 March 2019 User account Christoph talk contribs was created by Lukas talk contribs and password was sent by email (new member :-))
- 19:47, 8 March 2019 User account Troja talk contribs was created by Lukas talk contribs and password was sent by email (ne)
- 19:43, 8 March 2019 User account Hengelke talk contribs was created by Lukas talk contribs and password was sent by email (new member :-))
- 19:07, 7 March 2019 Lukas talk contribs uploaded File:Center finder on log.JPG (using a 3D printed "center finder" to estimate the center of a not exactly round apple log)
- 18:55, 7 March 2019 Lukas talk contribs uploaded File:Squaring up 2.JPG (squaring up a woodturning blank, step 2: cut your stock using the previously set parallel fence - not too difficult ;-))
- 18:48, 7 March 2019 Lukas talk contribs uploaded File:Squaring up 1.JPG (squaring up a woodturning blank, step 1: use the narrower width of your stock to set the table saw's parallel fence)
- 18:42, 7 March 2019 Lukas talk contribs uploaded File:Softwood spindle blanks.JPG (spindle woodturning blanks cut from various softwood scraps - good for practicing (e.g. file handles, but not suited for complex shapes)
- 18:07, 7 March 2019 Lukas talk contribs uploaded File:Composite woodturning blank.JPG (composite woodturning blank (top) and the resulting gardening tool - lots of wood was saved here by only gluing on a thicker section where needed! woodturning credit goes to Axel ;-))
- 17:58, 7 March 2019 Lukas talk contribs uploaded File:Pear branch cut faces.JPG (Project:Drying Timber cut faces of two pear branches before they were sealed for drying)
- 17:57, 7 March 2019 Lukas talk contribs uploaded File:Cut up zwetschge before sealing.JPG (Project:Drying Timber (some) pieces of a zwetschge tree that had to go, but will hopefully get a second life as the result of various woodworking projects!)
- 17:55, 7 March 2019 Lukas talk contribs deleted page File:Cut up zwetschge before sealing.JPG
- 17:52, 7 March 2019 Lukas talk contribs uploaded File:Cut up zwetschge before sealing.JPG (Project:Drying Timber pieces of a zwetschge tree that had to go, but will hopefully get a second life as the result of various woodworking projects!)
- 17:46, 7 March 2019 Lukas talk contribs uploaded File:Kim's mystery timber.JPG (Project:Drying Timber two glue-sealed large pieces of a not yet identified tree which unfortunately turned out to be infested with beetles)
- 17:30, 7 March 2019 Lukas talk contribs uploaded File:Putative apple log + glue.JPG (Project:Drying Timber piece of apple (maybe) just after applying wood glue to seal the ends)
- 17:25, 7 March 2019 Lukas talk contribs uploaded File:Spalted beech painted.JPG (Project:Drying Timber piece of beech with some interesting spalting, painted with clear lacquer a bit late: there were already some checks)
- 17:23, 7 March 2019 Lukas talk contribs uploaded File:Checked cherry painted.JPG (Project:Drying Timber piece of cherry that was painted with clear lacquer a bit late: there were already some checks)
- 17:22, 7 March 2019 Lukas talk contribs uploaded File:Checked maple painted.JPG (Project:Drying Timber piece of maple that was painted with clear lacquer a bit late: there were already some checks)
- 17:13, 7 March 2019 Lukas talk contribs uploaded File:Early beech drying attempt.jpg (Project:Drying Timber one of the first pieces Lukas started to dry: beech without special treatment)
- 19:34, 6 March 2019 Lukas talk contribs uploaded File:Airlag's yew logs.jpg (Project:Drying Timber kind gift of two yew logs that Airlag had in his garage for a few years)
- 19:19, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried beech log.JPG (Project:Drying Timber beech log that had already been outside for about 6 months, shortly before getting sealed with paraffin (microwaved candle stumps & dripped from burning candle))
- 19:16, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried ash log.JPG (Project:Drying Timber ash log that had already been outside for about 6 months, shortly before getting sealed with paraffin (microwaved candle stumps & dripped from burning candle))
- 19:10, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried apple log.jpg (Project:Drying Timber an apple log that had already dried outside for a while shortly before being end-sealed with paraffin)
- 18:53, 6 March 2019 Lukas talk contribs uploaded File:Ash log paraffin treatment.JPG (Project:Drying Timber although this ash log may have been split too far already when Lukas found it, the ends were sealed with paraffin (candle stumps melted with a heat gun))
- 19:39, 5 March 2019 Lukas talk contribs uploaded File:Socket wrench storage.jpg (our socket wrenches and a selection of sockets on the wall)
- 19:35, 5 March 2019 Lukas talk contribs moved page Socket Wrench to Socket Wrenches
- 18:46, 5 March 2019 Lukas talk contribs uploaded File:TAC 24.JPG (Project:TAC finished 4-player board)
- 18:45, 5 March 2019 Lukas talk contribs uploaded File:TAC 23.JPG (Project:TAC for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD))
- 18:43, 5 March 2019 Lukas talk contribs uploaded File:TAC 22.JPG (Project:TAC ''Alleskleber'' was used to stick the felt to the board)
- 18:37, 5 March 2019 Lukas talk contribs uploaded File:TAC 21.JPG (Project:TAC the center of the 4-player board ("card pit"?) was covered in green felt for a nice look)
- 18:35, 5 March 2019 Lukas talk contribs uploaded File:TAC 20.JPG (Project:TAC cleaned up area of the 4-player board)
- 18:33, 5 March 2019 Lukas talk contribs uploaded File:TAC 19.JPG (Project:TAC partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood)
- 18:32, 5 March 2019 Lukas talk contribs uploaded File:TAC 18.JPG (Project:TAC since the 4-player board's hardwood fibers were easily cut by a knife, sanding and the resulting brightening of the ''Eukalyptus'' wood could be largely avoided during the cleanup process)
- 18:28, 5 March 2019 Lukas talk contribs uploaded File:TAC 17.JPG (Project:TAC finally, the 6-player board (spruce/fir) was finished with olive oil)
- 18:27, 5 March 2019 Lukas talk contribs uploaded File:TAC 16.JPG (Project:TAC completely sanded area of the 6-player board)
- 18:25, 5 March 2019 Lukas talk contribs uploaded File:TAC 15.JPG (Project:TAC the soft spruce/fir wood was best cleaned up with sandpaper after routing)
- 00:19, 5 March 2019 Lukas talk contribs uploaded File:TAC 14.JPG (Project:TAC chamfered edge of the 6-player board (before sanding))