All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 22:36, 14 October 2019 User account Kaya talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:47, 8 October 2019 Lukas talk contribs created page Trockenbau (Created page with "Falls wir in eine unausgebaute Halle ziehen, werden wir selbst Wände einziehen müssen - was sind dafür die Optionen? '''Noch sehr unvollständig! Bringt euch gerne ein, we...")
- 02:04, 3 October 2019 Lukas talk contribs created page File:Kreidekreisel.jpg (Kreidekreisel vorm Maus-Türöffnertag 2019 ("fertig genug"))
- 02:04, 3 October 2019 Lukas talk contribs uploaded File:Kreidekreisel.jpg (Kreidekreisel vorm Maus-Türöffnertag 2019 ("fertig genug"))
- 22:08, 2 October 2019 Lukas talk contribs deleted page User:Reogaro (Author request: content was: "I am , a IT student currently finishing up school. Some projects I have worked on/am working on: * Upgrading my 3D printer (on...", and the only contributor was "Reogaro" ([[User talk:Reo...)
- 22:01, 2 October 2019 User account Leo talk contribs was created by Lukas talk contribs and password was sent by email
- 17:42, 1 October 2019 Lukas talk contribs created page Raspeln (Redirected page to Rasps) Tag: New redirect
- 17:41, 1 October 2019 Lukas talk contribs created page Rundstab (Redirected page to Material:Dowels) Tag: New redirect
- 17:38, 1 October 2019 Lukas talk contribs created page Project:Kreidekreisel (erstmal ohne Fotos...)
- 17:21, 30 September 2019 Lukas talk contribs created page File:Protection - breathing.svg (mandatory action icon EN ISO 7010 M016 - "wear a mask"/''"Maske benutzen"'' This sign means you should wear a dust mask or similar breathing protection! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M016....)
- 17:21, 30 September 2019 Lukas talk contribs uploaded File:Protection - breathing.svg (mandatory action icon EN ISO 7010 M016 - "wear a mask"/''"Maske benutzen"'' This sign means you should wear a dust mask or similar breathing protection! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M016....)
- 17:21, 30 September 2019 Lukas talk contribs created page File:Protection - face shield.svg (mandatory action icon EN ISO 7010 M013 - "use protective face shield"/''"Gesichtsschutz benutzen"'' This sign means you should wear a face shield to protect your eyes and face! It is often advised to wear goggles below the shield a...)
- 17:21, 30 September 2019 Lukas talk contribs uploaded File:Protection - face shield.svg (mandatory action icon EN ISO 7010 M013 - "use protective face shield"/''"Gesichtsschutz benutzen"'' This sign means you should wear a face shield to protect your eyes and face! It is often advised to wear goggles below the shield a...)
- 15:19, 29 September 2019 Lukas talk contribs created page Scraper (Redirected page to Woodturning Tools#Scrapers) Tag: New redirect
- 15:17, 29 September 2019 Lukas talk contribs created page File:Ausdrehstahl rund.jpg (tip of a round 20 mm "Kirschen" side cutting scraper)
- 15:17, 29 September 2019 Lukas talk contribs uploaded File:Ausdrehstahl rund.jpg (tip of a round 20 mm "Kirschen" side cutting scraper)
- 14:31, 29 September 2019 Lukas talk contribs created page File:Kirschen Abstecher.jpg (tip of a "European style" parting tool (Kirschen, 4 mm))
- 14:31, 29 September 2019 Lukas talk contribs uploaded File:Kirschen Abstecher.jpg (tip of a "European style" parting tool (Kirschen, 4 mm))
- 12:02, 28 September 2019 Lukas talk contribs created page Makita DRT50 (Redirected page to Routers#Makita DRT50) Tag: New redirect
- 12:00, 28 September 2019 Lukas talk contribs created page Scheppach DP 16 SL (Redirected page to Drill Presses#Scheppach DP 16 SL) Tag: New redirect
- 11:51, 28 September 2019 Lukas talk contribs created page File:Paint can opening.jpg (spatulas are much better for opening paint can lids than screwdrivers which often bend the lid enough to cause air gaps)
- 11:51, 28 September 2019 Lukas talk contribs uploaded File:Paint can opening.jpg (spatulas are much better for opening paint can lids than screwdrivers which often bend the lid enough to cause air gaps)
- 11:45, 28 September 2019 Lukas talk contribs created page Spatel (Redirected page to Spatulas) Tag: New redirect
- 03:33, 28 September 2019 Lukas talk contribs created page Wire Brush (Redirected page to Wire Brushes) Tag: New redirect
- 03:05, 28 September 2019 Lukas talk contribs created page (Archived) Bosch PTS 10 (info moved from 'table saw' that may be worth keeping)
- 00:19, 28 September 2019 Lukas talk contribs uploaded File:Elektra Beckum PK 255.jpg (Our new "Elektra Beckum PK 255" table saw)
- 00:19, 28 September 2019 Lukas talk contribs created page File:Elektra Beckum PK 255.jpg (Our new "Elektra Beckum PK 255" table saw)
- 23:56, 21 September 2019 Lukas talk contribs created page File:Stehschreibtisch.JPG (einfaches Stehschreibtisch-Upgrade, das im "Sitzmodus" über den Monitor passt)
- 23:56, 21 September 2019 Lukas talk contribs uploaded File:Stehschreibtisch.JPG (einfaches Stehschreibtisch-Upgrade, das im "Sitzmodus" über den Monitor passt)
- 19:10, 20 September 2019 Lukas talk contribs created page File:Schräge DVD-Regale.jpg (der 45-Grad-Winkel hat zwei Vorteile: * die Titel sind besser lesbar als auf waagerechten Regalbrettern * die Hüllen lasten nicht so stark aufeinander wie im senkrechten Stapel)
- 19:10, 20 September 2019 Lukas talk contribs uploaded File:Schräge DVD-Regale.jpg (der 45-Grad-Winkel hat zwei Vorteile: * die Titel sind besser lesbar als auf waagerechten Regalbrettern * die Hüllen lasten nicht so stark aufeinander wie im senkrechten Stapel)
- 19:00, 20 September 2019 Lukas talk contribs created page File:Besteck-Uhr.jpg (Uhr aus alten Gabeln und Löffeln - Messergriffe waren zu dick, um sie gut mit dem Ring zu vernieten.)
- 19:00, 20 September 2019 Lukas talk contribs uploaded File:Besteck-Uhr.jpg (Uhr aus alten Gabeln und Löffeln - Messergriffe waren zu dick, um sie gut mit dem Ring zu vernieten.)
- 22:54, 19 September 2019 Lukas talk contribs created page GCode (Redirected page to Format:G-code) Tag: New redirect
- 14:16, 19 September 2019 User account Jonah talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 20:59, 17 September 2019 Lukas talk contribs moved page Drill Press to Drill Presses
- 21:52, 16 September 2019 Lukas talk contribs created page File:Skibogen v1.2.jpg (Mein erster funktionierender Bogen aus Langlaufski (zweite Version des Mittelstücks))
- 21:52, 16 September 2019 Lukas talk contribs uploaded File:Skibogen v1.2.jpg (Mein erster funktionierender Bogen aus Langlaufski (zweite Version des Mittelstücks))
- 00:59, 12 September 2019 Lukas talk contribs uploaded File:Pruning saw.jpg (A large pruning saw)
- 00:59, 12 September 2019 Lukas talk contribs created page File:Pruning saw.jpg (A large pruning saw)
- 17:35, 7 September 2019 Lukas talk contribs created page Safety Icons (Redirected page to Category:Safety Icons) Tag: New redirect
- 17:26, 7 September 2019 Lukas talk contribs created page Category:Safety Icons (Created page with "This category contains safety-related icons - great for illustrating introductions or making signs, for example! Category:Safety")
- 16:32, 6 September 2019 Lukas talk contribs created page File:Danger - fire.svg (warning icon EN ISO 7010 W021 - "Combustible and flammable materials"/"Warnung vor feuergefährlichen Stoffen" This sign means there is a danger of fire due to a machine, tool or material! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W021.sv...)
- 16:32, 6 September 2019 Lukas talk contribs uploaded File:Danger - fire.svg (warning icon EN ISO 7010 W021 - "Combustible and flammable materials"/"Warnung vor feuergefährlichen Stoffen" This sign means there is a danger of fire due to a machine, tool or material! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W021.sv...)
- 02:14, 5 September 2019 Lukas talk contribs created page Sawband (Redirected page to Bandsaw Blades) Tag: New redirect
- 02:13, 5 September 2019 Lukas talk contribs created page Bandsaw Fence (Created page with "{{ToolInfoBox |tool name=Simple Straight Fence |image=simple bandsaw fence.jpg |synonyms=parallel fence; DE: Bandsägen-Parallelanschlag |type=jig |status= |material= |use...")
- 02:10, 5 September 2019 Lukas talk contribs created page File:Simple bandsaw fence.jpg (Manu using the bandsaw fence he made)
- 02:10, 5 September 2019 Lukas talk contribs uploaded File:Simple bandsaw fence.jpg (Manu using the bandsaw fence he made)
- 21:08, 1 September 2019 Lukas talk contribs created page File:Protection - protective clothing.svg (mandatory action icon EN ISO 7010 W010 - "use protective clothing"/''"Schutzkleidung benutzen"'' This sign means you need to wear protective clothing to protect yourself. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M010.svg (public domain))
- 21:08, 1 September 2019 Lukas talk contribs uploaded File:Protection - protective clothing.svg (mandatory action icon EN ISO 7010 W010 - "use protective clothing"/''"Schutzkleidung benutzen"'' This sign means you need to wear protective clothing to protect yourself. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M010.svg (public domain))
- 21:02, 1 September 2019 Lukas talk contribs created page File:Danger - high voltage.svg (warning icon EN ISO 7010 W012 - "high voltage"/''"Warnung vor elektrischer Spannung"'' This sign means you may be exposed to high voltage, risking electric shock. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W012.svg (public domain))
- 21:02, 1 September 2019 Lukas talk contribs uploaded File:Danger - high voltage.svg (warning icon EN ISO 7010 W012 - "high voltage"/''"Warnung vor elektrischer Spannung"'' This sign means you may be exposed to high voltage, risking electric shock. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W012.svg (public domain))
- 20:42, 1 September 2019 Lukas talk contribs created page Welding Mask (Redirected page to Welding Helmets) Tag: New redirect
- 20:40, 1 September 2019 Lukas talk contribs created page File:Protection - welding mask.svg (mandatory action icon EN ISO 7010 W019 - "wear a welding mask"/''"Schweißmaske benutzen"'' This sign means you need to wear a welding mask to protect your eyes and face. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M019.svg...)
- 20:40, 1 September 2019 Lukas talk contribs uploaded File:Protection - welding mask.svg (mandatory action icon EN ISO 7010 W019 - "wear a welding mask"/''"Schweißmaske benutzen"'' This sign means you need to wear a welding mask to protect your eyes and face. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M019.svg...)
- 18:16, 1 September 2019 Lukas talk contribs created page File:Danger - optical radiation.svg (warning icon EN ISO 7010 W024 - "warning for optical radiation"/''"Warnung vor optischer Strahlung"'' This sign means you can encounter dangerous optical radiation (light). source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W027.svg (public domain))
- 18:16, 1 September 2019 Lukas talk contribs uploaded File:Danger - optical radiation.svg (warning icon EN ISO 7010 W024 - "warning for optical radiation"/''"Warnung vor optischer Strahlung"'' This sign means you can encounter dangerous optical radiation (light). source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W027.svg (public domain))
- 17:56, 1 September 2019 Lukas talk contribs created page File:Danger - hand injury.svg (warning icon EN ISO 7010 W024 - "hand injury"/''"Warnung vor Handverletzungen"'' This sign means you can encounter moving workpieces or machine parts that may hurt your hands (or other bodyparts). source: https://commons.wikimedia.org/wiki/File:ISO_7...)
- 17:56, 1 September 2019 Lukas talk contribs uploaded File:Danger - hand injury.svg (warning icon EN ISO 7010 W024 - "hand injury"/''"Warnung vor Handverletzungen"'' This sign means you can encounter moving workpieces or machine parts that may hurt your hands (or other bodyparts). source: https://commons.wikimedia.org/wiki/File:ISO_7...)
- 17:23, 30 August 2019 Lukas talk contribs created page Sicherheit (Redirected page to Category;Safety) Tag: New redirect
- 17:05, 30 August 2019 Lukas talk contribs created page Category:Safety (Created page with "Safety is very important in any workshop environment! You'll learn the minimum precautions for each machine during introductions, but here you can also find more general p...")
- 16:57, 30 August 2019 Lukas talk contribs created page Safety (Redirected page to Category:Safety) Tag: New redirect
- 17:11, 29 August 2019 Lukas talk contribs created page Compressor Introduction/Waiting (created page; moved Luzian here from the introduction page itself)
- 17:07, 29 August 2019 Lukas talk contribs moved page Project:Project:Restore old Scooters to Project:Restore old Scooters without leaving a redirect (removed extra "Project" from title; fixed double redirect)
- 17:07, 29 August 2019 Lukas talk contribs deleted page Project:Restore old Scooters (Deleted to make way for move from "Project:Project:Restore old Scooters")
- 17:11, 12 August 2019 Lukas talk contribs uploaded File:Protection - gloves.svg (mandatory action icon EN ISO 7010 M009 - "use protective handwear"/''"Handschutz benutzen"'' This sign means you should wear gloves to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M009.svg (public domain))
- 17:11, 12 August 2019 Lukas talk contribs created page File:Protection - gloves.svg (mandatory action icon EN ISO 7010 M009 - "use protective handwear"/''"Handschutz benutzen"'' This sign means you should wear gloves to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M009.svg (public domain))
- 17:11, 12 August 2019 Lukas talk contribs created page File:Danger - heat.svg (warning icon EN ISO 7010 W017 - "warning for hot surface"/''"Warnung vor heißer Oberfläche"'' This sign means you could encounter hot workpieces or machine parts! Wear gloves if you can't avoid contact altogether. source: https://de.wikipedia.org/w...)
- 17:11, 12 August 2019 Lukas talk contribs uploaded File:Danger - heat.svg (warning icon EN ISO 7010 W017 - "warning for hot surface"/''"Warnung vor heißer Oberfläche"'' This sign means you could encounter hot workpieces or machine parts! Wear gloves if you can't avoid contact altogether. source: https://de.wikipedia.org/w...)
- 08:49, 10 August 2019 User account Drew talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 16:29, 9 August 2019 Lukas talk contribs uploaded File:Protection - hearing.svg (mandatory action icon EN ISO 7010 M003 - "use hearing protection"/''"Gehörschutz benutzen"'' This sign means you should wear hearing protection to protect your ears! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M003.sv...)
- 16:29, 9 August 2019 Lukas talk contribs created page File:Protection - hearing.svg (mandatory action icon EN ISO 7010 M003 - "use hearing protection"/''"Gehörschutz benutzen"'' This sign means you should wear hearing protection to protect your ears! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M003.sv...)
- 17:01, 7 August 2019 Lukas talk contribs uploaded File:Danger - draw-in.svg (warning icon EN ISO 7010 W025 - "counter rotating roller"/''"Warnung vor gegenläufigen Rollen"'' You may see this sign in this wiki or our Space if a machine can draw the user (or any body parts/clothing/jewellery) in, e.g. * between rotating parts *...)
- 17:01, 7 August 2019 Lukas talk contribs created page File:Danger - draw-in.svg (warning icon EN ISO 7010 W025 - "counter rotating roller"/''"Warnung vor gegenläufigen Rollen"'' You may see this sign in this wiki or our Space if a machine can draw the user (or any body parts/clothing/jewellery) in, e.g. * between rotating parts *...)
- 17:00, 7 August 2019 Lukas talk contribs created page File:Protection - no gloves.svg (prohibition icon EN ISO 7010 P028 - "do not wear gloves"/''"Benutzen von Handschuhen verboten"'' This sign means you should NOT wear gloves! A common reason for this is an increased risk of draw-in ''(Einzug)''. source: https://de.wikipedia.org/w...)
- 17:00, 7 August 2019 Lukas talk contribs uploaded File:Protection - no gloves.svg (prohibition icon EN ISO 7010 P028 - "do not wear gloves"/''"Benutzen von Handschuhen verboten"'' This sign means you should NOT wear gloves! A common reason for this is an increased risk of draw-in ''(Einzug)''. source: https://de.wikipedia.org/w...)
- 16:59, 7 August 2019 Lukas talk contribs uploaded File:Protection - goggles.svg (mandatory action icon EN ISO 7010 M004 - "use protective eyewear"/''"Augenschutz benutzen"'' This sign means you should wear goggles to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M004.svg (public domain))
- 16:59, 7 August 2019 Lukas talk contribs created page File:Protection - goggles.svg (mandatory action icon EN ISO 7010 M004 - "use protective eyewear"/''"Augenschutz benutzen"'' This sign means you should wear goggles to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M004.svg (public domain))
- 16:55, 7 August 2019 Lukas talk contribs uploaded File:Danger - sudden start.svg (warning icon EN ISO 7010 W018 - "remotely started equipment"/''"Warnung vor automatischem Anlauf"'' You may see this sign in this wiki or our Space if... * a machine can start unexpectedly, e.g. after returning lost power * a machine is started by a c...)
- 16:55, 7 August 2019 Lukas talk contribs created page File:Danger - sudden start.svg (warning icon EN ISO 7010 W018 - "remotely started equipment"/''"Warnung vor automatischem Anlauf"'' You may see this sign in this wiki or our Space if... * a machine can start unexpectedly, e.g. after returning lost power * a machine is started by a c...)
- 20:56, 5 August 2019 Lukas talk contribs created page File:Welding enclosure - inside.JPG (our welding enclosure as seen from the inside (rudimentary equipment as of May 2019))
- 20:56, 5 August 2019 Lukas talk contribs uploaded File:Welding enclosure - inside.JPG (our welding enclosure as seen from the inside (rudimentary equipment as of May 2019))
- 20:54, 5 August 2019 Lukas talk contribs uploaded File:Welding enclosure - outside.JPG (our welding enclosure as seen from the outside while someone is welding)
- 20:54, 5 August 2019 Lukas talk contribs created page File:Welding enclosure - outside.JPG (our welding enclosure as seen from the outside while someone is welding)
- 15:43, 5 August 2019 User account Julius talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 15:42, 5 August 2019 User account Pius talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 09:30, 4 August 2019 User account Unknown user talk was created by Lukas talk contribs and password was sent by email (new member!)
- 08:46, 28 July 2019 Lukas talk contribs created page Rotary Rasps (Redirected page to Rasp Bits) Tag: New redirect
- 16:51, 27 July 2019 Lukas talk contribs created page Template:MainPage-Desktop (Created page with "<!-- invisible boxes to fix various slideshow issues --> {| style="width:100%; text-align:center; margin-left: auto; margin-right: 0px;" cellpadding="0" cellspacing="0" |- val...")
- 16:23, 27 July 2019 Lukas talk contribs changed group membership for Lukas from bureaucrat and administrator to bureaucrat, administrator and interface administrator (to include "mobile-only" in Common.css)
- 11:26, 27 July 2019 Lukas talk contribs created page User:Lukas/Sandbox (copied main page code for adjustments for mobile view)
- 17:09, 25 July 2019 Lukas talk contribs created page File:Woodturning - tenon by parting tool.gif (Lukas demonstrating some simple woodturning at the Bahnstadtfest 2019: turning a tenon with a parting tool (e.g. for the end of a file handle) Video shot & shared under Creative Commons by [[User:Narqu...)
- 17:09, 25 July 2019 Lukas talk contribs uploaded File:Woodturning - tenon by parting tool.gif (Lukas demonstrating some simple woodturning at the Bahnstadtfest 2019: turning a tenon with a parting tool (e.g. for the end of a file handle) Video shot & shared under Creative Commons by [[User:Narqu...)
- 13:04, 23 July 2019 Lukas talk contribs created page Plenum/Meeting minutes/2019-08-07 (creation from "00 Template")
- 18:22, 22 July 2019 Lukas talk contribs deleted redirect Pruning Saw by overwriting (Deleted to make way for move from "Wanted:Pruning Saw")
- 18:22, 22 July 2019 Lukas talk contribs moved page Wanted:Pruning Saw to Pruning Saw over a redirect without leaving a redirect (Micha brought one!)
- 18:21, 22 July 2019 Lukas talk contribs created page Astsäge (Redirected page to Pruning Saw) Tag: New redirect
- 17:52, 22 July 2019 Lukas talk contribs created page FabScanPi (Redirected page to 3D Scanners#FabScanPi) Tag: New redirect
- 17:48, 18 July 2019 Lukas talk contribs created page Breathing Protection (redirecting to dust masks (for now)) Tag: New redirect
- 17:06, 18 July 2019 Lukas talk contribs created page Dust Extractor (Created page with "{{MachineInfoBox |machine name=BAMATO AB-550 |image= |synonyms=vacuum extractor, vacuum extraction machine; DE: Absauganlage |type=dust collection |material=wood & sim...")
- 17:01, 18 July 2019 Lukas talk contribs moved page Dust to Category:Dust (we'll have another few related pages soon)
- 01:07, 18 July 2019 User account Bastian talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 01:06, 18 July 2019 User account Anton talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 19:50, 17 July 2019 User account Hannes talk contribs was created by Lukas talk contribs and password was sent by email (welcon)
- 17:04, 17 July 2019 Lukas talk contribs created page Eye Protection (Redirected page to Personal Protection#Eye Protection) Tag: New redirect
- 16:59, 17 July 2019 Lukas talk contribs created page File:Splashing solder - it happens!.png (splashing liquid metal is a real risk while soldering, so you should wear eye protection!)
- 16:59, 17 July 2019 Lukas talk contribs uploaded File:Splashing solder - it happens!.png (splashing liquid metal is a real risk while soldering, so you should wear eye protection!)
- 09:21, 17 July 2019 Lukas talk contribs created page Löten (Redirected page to Soldering Irons) Tag: New redirect
- 08:21, 17 July 2019 Lukas talk contribs created page Captive Rings (Redirected page to Project:Captive Ring Turning) Tag: New redirect
- 08:20, 17 July 2019 Lukas talk contribs created page Gefangene Ringe (Redirected page to Project:Captive Ring Turning) Tag: New redirect
- 11:06, 14 July 2019 Lukas talk contribs created page File:Captive rings 16.jpg (Project:Captive Ring Turning done!)
- 11:06, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 16.jpg (Project:Captive Ring Turning done!)
- 11:00, 14 July 2019 Lukas talk contribs created page File:Captive rings 15.JPG (Project:Captive Ring Turning one more waxing step with hot air...)
- 11:00, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 15.JPG (Project:Captive Ring Turning one more waxing step with hot air...)
- 10:56, 14 July 2019 Lukas talk contribs created page File:Captive rings 14.JPG (Project:Captive Ring Turning after parting the piece off on the lathe, I sanded the ends by hand (although a disc sander would have been much better))
- 10:56, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 14.JPG (Project:Captive Ring Turning after parting the piece off on the lathe, I sanded the ends by hand (although a disc sander would have been much better))
- 10:51, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 13.JPG (Project:Captive Ring Turning waxing the rings is not possible with the friction method as they would just stop spinning - use a hot air gun instead)
- 10:51, 14 July 2019 Lukas talk contribs created page File:Captive rings 13.JPG (Project:Captive Ring Turning waxing the rings is not possible with the friction method as they would just stop spinning - use a hot air gun instead)
- 10:47, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 12.JPG (Project:Captive Ring Turning even out the beeswax and work it in deeper with a paper towel)
- 10:47, 14 July 2019 Lukas talk contribs created page File:Captive rings 12.JPG (Project:Captive Ring Turning even out the beeswax and work it in deeper with a paper towel)
- 10:41, 14 July 2019 Lukas talk contribs created page File:Captive rings 11.JPG (Project:Captive Ring Turning applying beeswax is easy with the lathe spinning - most of it melts just by friction!)
- 10:41, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 11.JPG (Project:Captive Ring Turning applying beeswax is easy with the lathe spinning - most of it melts just by friction!)
- 10:34, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 10.JPG (Project:Captive Ring Turning sanding the rings' insides is possible by taping some sandpaper to the spinning middle section and holding the rings)
- 10:34, 14 July 2019 Lukas talk contribs created page File:Captive rings 10.JPG (Project:Captive Ring Turning sanding the rings' insides is possible by taping some sandpaper to the spinning middle section and holding the rings)
- 10:31, 14 July 2019 Lukas talk contribs uploaded File:Captive rings 09.JPG (Project:Captive Ring Turning give the end knobs some shape until you're happy (don't take too much off the diameter!))
- 10:31, 14 July 2019 Lukas talk contribs created page File:Captive rings 09.JPG (Project:Captive Ring Turning give the end knobs some shape until you're happy (don't take too much off the diameter!))
- 15:22, 13 July 2019 Lukas talk contribs created page File:Captive rings 08.JPG (Project:Captive Ring Turning this part was a bit scary (not tested beforehand): "planing" the middle section with the skew chisel while the rings are taped to the side)
- 15:21, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 08.JPG (Project:Captive Ring Turning this part was a bit scary (not tested beforehand): "planing" the middle section with the skew chisel while the rings are taped to the side)
- 15:20, 13 July 2019 Lukas talk contribs created page File:Captive rings 07.JPG (Project:Captive Ring Turning fast forward: two rings are cut! See "Project:Captive Ring Turning#Educative Failures" for more details on this part of the project)
- 15:20, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 07.JPG (Project:Captive Ring Turning fast forward: two rings are cut! See "Project:Captive Ring Turning#Educative Failures" for more details on this part of the project)
- 15:16, 13 July 2019 Lukas talk contribs created page File:Captive rings 06.JPG (Project:Captive Ring Turning burn marks are to be expected when using a self-made tool for this job - just make sure you don't generate enough heat to crack the wood!)
- 15:16, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 06.JPG (Project:Captive Ring Turning burn marks are to be expected when using a self-made tool for this job - just make sure you don't generate enough heat to crack the wood!)
- 15:13, 13 July 2019 Lukas talk contribs created page File:Captive rings 05.JPG (Project:Captive Ring Turning after defining its outer curve with a parting tool and then a spindle gouge, the future ring is slowly undercut with the hook tool)
- 15:13, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 05.JPG (Project:Captive Ring Turning after defining its outer curve with a parting tool and then a spindle gouge, the future ring is slowly undercut with the hook tool)
- 09:44, 13 July 2019 Lukas talk contribs created page File:Captive rings 04.JPG (Project:Captive Ring Turning sketching the dimensions of the first elements: end knob, gap, ring (1/2 gap width), gap)
- 09:44, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 04.JPG (Project:Captive Ring Turning sketching the dimensions of the first elements: end knob, gap, ring (1/2 gap width), gap)
- 09:40, 13 July 2019 Lukas talk contribs created page File:Captive rings 03.JPG (Project:Captive Ring Turning first step in pretty much any woodturning project: roughing)
- 09:40, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 03.JPG (Project:Captive Ring Turning first step in pretty much any woodturning project: roughing)
- 09:37, 13 July 2019 Lukas talk contribs created page File:Captive rings 01.JPG (Project:Captive Ring Turning the apple log was dried quite nicely and only had two superficial cracks)
- 09:37, 13 July 2019 Lukas talk contribs uploaded File:Captive rings 01.JPG (Project:Captive Ring Turning the apple log was dried quite nicely and only had two superficial cracks)
- 02:48, 13 July 2019 Lukas talk contribs created page Hex Key (Redirected page to Hex Keys) Tag: New redirect
- 02:44, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test13.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) - a ring! and it's captive!)
- 02:44, 13 July 2019 Lukas talk contribs created page File:Captive rings - test13.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) - a ring! and it's captive!)
- 02:41, 13 July 2019 Lukas talk contribs created page File:Captive rings - test12.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test12.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs created page File:Captive rings - test11.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:41, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test11.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:40, 13 July 2019 Lukas talk contribs created page File:Captive rings - test10.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:40, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test10.JPG (Project:Captive Ring Turning second test with inferior hardwood (store-bought birch))
- 02:38, 13 July 2019 Lukas talk contribs created page File:Captive rings - test09.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:38, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test09.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:35, 13 July 2019 Lukas talk contribs created page File:Captive rings - test08.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:35, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test08.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:34, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test07.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:34, 13 July 2019 Lukas talk contribs created page File:Captive rings - test07.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:29, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test06.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - defining the ring with a spindle gouge)
- 02:29, 13 July 2019 Lukas talk contribs created page File:Captive rings - test06.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - defining the ring with a spindle gouge)
- 02:25, 13 July 2019 Lukas talk contribs created page File:Captive rings - test05.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel)
- 02:25, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test05.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel)
- 02:22, 13 July 2019 Lukas talk contribs created page Property:Tutor (Created page with "Have a look at "Tutors" for an explanation of our introduction system! Has type::Page")
- 02:14, 13 July 2019 Lukas talk contribs created page File:Captive rings - test04.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:14, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test04.JPG (Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch))
- 02:08, 13 July 2019 Lukas talk contribs created page File:Captive rings - test03.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:08, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test03.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:00, 13 July 2019 Lukas talk contribs created page File:Captive rings - test02.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 02:00, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test02.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:59, 13 July 2019 Lukas talk contribs uploaded File:Captive rings - test01.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:59, 13 July 2019 Lukas talk contribs created page File:Captive rings - test01.JPG (Project:Captive Ring Turning first <s>test</s>fail with softwood (fir))
- 01:40, 13 July 2019 Lukas talk contribs created page Spindle Gouges (Redirected page to Woodturning Tools#Spindle Gouges) Tag: New redirect
- 01:39, 13 July 2019 Lukas talk contribs created page Spindle Gouge (Redirected page to Woodturning Tools#Spindle Gouges) Tag: New redirect
- 01:25, 13 July 2019 Lukas talk contribs created page Project:Captive Ring Turning (first gallery up)
- 01:10, 13 July 2019 Lukas talk contribs created page File:Hook tool 9.JPG (Project:Captive Ring Turning#Making the Hook Tool finally grind a scraping tip onto the (former) hex key)
- 01:10, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 9.JPG (Project:Captive Ring Turning#Making the Hook Tool finally grind a scraping tip onto the (former) hex key)
- 01:06, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 8.JPG (Project:Captive Ring Turning#Making the Hook Tool amazing what you can still make out of a little bit of junk! (rest of the scrap wood for comparison))
- 01:06, 13 July 2019 Lukas talk contribs created page File:Hook tool 8.JPG (Project:Captive Ring Turning#Making the Hook Tool amazing what you can still make out of a little bit of junk! (rest of the scrap wood for comparison))
- 01:03, 13 July 2019 Lukas talk contribs created page File:Hook tool 7.JPG (Project:Captive Ring Turning#Making the Hook Tool the hex key and ferrule should be glued in place with epoxy)
- 01:03, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 7.JPG (Project:Captive Ring Turning#Making the Hook Tool the hex key and ferrule should be glued in place with epoxy)
- 00:59, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 6.JPG (Project:Captive Ring Turning#Making the Hook Tool a sturdy tailstock on the wood lathe can help to press the ferrule onto the tool handle)
- 00:59, 13 July 2019 Lukas talk contribs created page File:Hook tool 6.JPG (Project:Captive Ring Turning#Making the Hook Tool a sturdy tailstock on the wood lathe can help to press the ferrule onto the tool handle)
- 00:55, 13 July 2019 Lukas talk contribs created page File:Hook tool 5.JPG (Project:Captive Ring Turning#Making the Hook Tool make the handle rather long - like all woodturning tools, it should provide good leverage)
- 00:55, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 5.JPG (Project:Captive Ring Turning#Making the Hook Tool make the handle rather long - like all woodturning tools, it should provide good leverage)
- 00:50, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 4.JPG (Project:Captive Ring Turning#Making the Hook Tool once the handle is turned round, the ferrule can be used to determine the shoulder position)
- 00:50, 13 July 2019 Lukas talk contribs created page File:Hook tool 4.JPG (Project:Captive Ring Turning#Making the Hook Tool once the handle is turned round, the ferrule can be used to determine the shoulder position)
- 00:40, 13 July 2019 Lukas talk contribs created page File:Hook tool 3.JPG (Project:Captive Ring Turning#Making the Hook Tool a brace is very useful to pre-drill the center hole on a woodturning blank)
- 00:40, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 3.JPG (Project:Captive Ring Turning#Making the Hook Tool a brace is very useful to pre-drill the center hole on a woodturning blank)
- 00:24, 13 July 2019 Lukas talk contribs uploaded File:Hook tool 2.JPG (the first step of most tool handle woodturning projects is the ferrule - e.g. cut with a pipe cutter)
- 00:24, 13 July 2019 Lukas talk contribs created page File:Hook tool 2.JPG (the first step of most tool handle woodturning projects is the ferrule - e.g. cut with a pipe cutter)
- 17:06, 11 July 2019 Lukas talk contribs created page QR-Codes (Redirected page to QR Code) Tag: New redirect
- 17:06, 11 July 2019 Lukas talk contribs created page File:Rex laminator.JPG (our laminator laminating some laminated QR-Codes)
- 17:06, 11 July 2019 Lukas talk contribs uploaded File:Rex laminator.JPG (our laminator laminating some laminated QR-Codes)
- 17:05, 11 July 2019 Lukas talk contribs created page Electronic Protractor (Redirected page to Goniometer) Tag: New redirect
- 17:04, 11 July 2019 Lukas talk contribs created page Digital Protractor (Redirected page to Goniometer) Tag: New redirect
- 17:03, 11 July 2019 Lukas talk contribs uploaded a new version of File:Disc grinder vs steel.JPG (cropped for better focus on the machine)
- 14:06, 11 July 2019 Lukas talk contribs uploaded a new version of File:LED strip circuit Steckplatine.png (fixed wrong wiring at bottom MOSFET)
- 19:51, 10 July 2019 User account F.Huchinson talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:26, 5 July 2019 Lukas talk contribs created page Project:Skibogen (Created page with "{{ProjectInfoBox |project title=Bogen aus alten Ski |image= |status=Materialsammlung |date= |initiator=Lukas |team=Gesa |materials=Langlaufski (Recyclingkaufhaus), Holzr...")
- 02:31, 4 July 2019 User account Ward.Joumaa.90 talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 02:24, 4 July 2019 User account Unknown user talk was created by Lukas talk contribs and password was sent by email (new member!)
- 02:22, 4 July 2019 User account Unknown user talk was created by Lukas talk contribs and password was sent by email (new member!)
- 02:15, 4 July 2019 User account WALIDKHAN talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 20:19, 3 July 2019 Lukas talk contribs created page Extrusions (Redirected page to Material:Aluminum Extrusions) Tag: New redirect
- 00:10, 3 July 2019 Lukas talk contribs created page Laminator (mainly commissioning so far)
- 23:52, 2 July 2019 Lukas talk contribs created page Laminiergerät (Redirected page to Laminator) Tag: New redirect
- 17:47, 1 July 2019 Lukas talk contribs moved page Wanted:Foam Cutter to Foam Cutter over redirect (in commissioning)
- 17:47, 1 July 2019 Lukas talk contribs deleted redirect Foam Cutter by overwriting (Deleted to make way for move from "Wanted:Foam Cutter")
- 22:26, 30 June 2019 Lukas talk contribs created page Backsaw (Redirected page to Backsaws) Tag: New redirect
- 12:24, 30 June 2019 Lukas talk contribs created page Rasp Bits (Created page with "{{ToolInfoBox |tool name=Rasp Bits |image= |synonyms=rotary rasps;<br>DE: Freihandfräser, Rotationsraspeln, Rotor-Raspeln |type= |status= |material=wood |used with=Dril...")
- 22:55, 29 June 2019 Lukas talk contribs protected Template:PR-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:55, 29 June 2019 Lukas talk contribs protected Template:Financial-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:54, 29 June 2019 Lukas talk contribs protected Template:Community-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 22:54, 29 June 2019 Lukas talk contribs protected Template:Inventory-manager [Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite) (hist)
- 11:01, 29 June 2019 Lukas talk contribs created page Semantic MediaWiki (Created page with "We started using [https://www.semantic-mediawiki.org/wiki/Semantic_MediaWiki Semantic MediaWiki (SMW)] for some "smart" functions of this wiki around June 2019. Feel free to j...")
- 10:44, 29 June 2019 Lukas talk contribs created page SMW (Redirected page to Semantic MediaWiki) Tag: New redirect
- 09:53, 29 June 2019 Lukas talk contribs created page Schwingtier (Redirected page to Project:Swinging Puffin) Tag: New redirect
- 09:52, 29 June 2019 Lukas talk contribs moved page Project:Swinging-puffin to Project:Swinging Puffin (as written in the InfoBox, spaces in page titles are okay ;-))
- 18:49, 28 June 2019 Lukas talk contribs created page Metal Workshop/Gallery (Created page with "'''SANDBOX MODE - ignore this page if you're just browsing ;-)''' ''If you're interested, see [https://github.com/comakingspace/do-something/issues/130 do-something #130]''...")
- 17:27, 27 June 2019 Lukas talk contribs uploaded File:Wrong sandpaper choice.png (Do NOT use sanders with part of their velcro pad exposed! If there is no matching sandpaper, please buy some or use a different machine.)
- 17:27, 27 June 2019 Lukas talk contribs created page File:Wrong sandpaper choice.png (Do NOT use sanders with part of their velcro pad exposed! If there is no matching sandpaper, please buy some or use a different machine.)
- 17:25, 27 June 2019 Lukas talk contribs uploaded File:Drill press brain slug.JPG (to use an inclinometer on the drill press, you'll have to reference to the drill bit or chuck and move the table)
- 17:25, 27 June 2019 Lukas talk contribs created page File:Drill press brain slug.JPG (to use an inclinometer on the drill press, you'll have to reference to the drill bit or chuck and move the table)
- 17:24, 27 June 2019 Lukas talk contribs created page File:Inclinometer.JPG (inclinometer on our absolutely level common room table :-P)
- 17:24, 27 June 2019 Lukas talk contribs uploaded File:Inclinometer.JPG (inclinometer on our absolutely level common room table :-P)
- 17:18, 27 June 2019 Lukas talk contribs created page Borrowable (Redirected page to Category:Borrowable) Tag: New redirect
- 17:16, 27 June 2019 Lukas talk contribs uploaded File:Sheet sander motion.png (schematic of a sheet sander's movement pattern drawn with Inkscape)
- 17:16, 27 June 2019 Lukas talk contribs created page File:Sheet sander motion.png (schematic of a sheet sander's movement pattern drawn with Inkscape)
- 17:13, 27 June 2019 Lukas talk contribs created page Sander (Redirected page to Category:Sanders) Tag: New redirect
- 17:11, 27 June 2019 Lukas talk contribs created page File:Disc sander test.JPG (first test of our self-made lathe-mounted disc sander using the lathe's tool rest as a table)
- 17:11, 27 June 2019 Lukas talk contribs uploaded File:Disc sander test.JPG (first test of our self-made lathe-mounted disc sander using the lathe's tool rest as a table)
- 17:09, 27 June 2019 Lukas talk contribs created page Axe (Redirected page to Hatchet) Tag: New redirect
- 17:08, 27 June 2019 Lukas talk contribs created page Axt (Redirected page to Hatchet) Tag: New redirect
- 17:08, 27 June 2019 Lukas talk contribs created page Beil (Redirected page to Hatchet) Tag: New redirect
- 17:07, 27 June 2019 Lukas talk contribs created page Hatchet (Created page with "{{ToolInfoBox |tool name=Hatchet |image=ice pop hatchet.JPG |synonyms="axe"; DE: Beil, "Axt" |type= |status= |material=wood |used with= |location=Location::Wood Workshop...")
- 17:07, 27 June 2019 Lukas talk contribs created page File:Ice pop hatchet.JPG (putting a hatchet to good use in the summer...)
- 17:07, 27 June 2019 Lukas talk contribs uploaded File:Ice pop hatchet.JPG (putting a hatchet to good use in the summer...)
- 03:33, 27 June 2019 Lukas talk contribs moved page Glass Cutter to Glass Cutters
- 01:15, 27 June 2019 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf (updated MwSt (7% now!))
- 01:14, 27 June 2019 Lukas talk contribs uploaded a new version of File:Familienmitgliedschaft.pdf (updated MwSt (7% now!))
- 19:13, 26 June 2019 Lukas talk contribs created page Digital Level Box (Redirected page to Inclinometer) Tag: New redirect
- 18:22, 26 June 2019 Lukas talk contribs created page Angle Grinder Introduction (Redirected page to Disc Grinder Introduction) Tag: New redirect
- 17:15, 26 June 2019 Lukas talk contribs created page Chainsaw (quick safety brain dump; more news after the weekend)
- 23:12, 25 June 2019 Lukas talk contribs created page Permanent Marker (Redirected page to Markers) Tag: New redirect
- 21:46, 25 June 2019 Lukas talk contribs created page Myford ML7 (Redirected page to Metal Lathes#Myford ML7) Tag: New redirect
- 21:27, 25 June 2019 Lukas talk contribs created page Fuchsschwänze (Redirected page to Crosscut Saws) Tag: New redirect
- 21:24, 25 June 2019 Lukas talk contribs moved page Crosscut Saw to Crosscut Saws (pluralized)
- 17:21, 25 June 2019 Lukas talk contribs created page File:Slicer-Schema.PNG (simplified schematic of a 3D model being "sliced" into layers by a slicer (screenshot of a Tinkercad model))
- 17:21, 25 June 2019 Lukas talk contribs uploaded File:Slicer-Schema.PNG (simplified schematic of a 3D model being "sliced" into layers by a slicer (screenshot of a Tinkercad model))
- 17:19, 25 June 2019 Lukas talk contribs created page PrusaSlicer (Created page with "{{SoftwareInfoBox |software name=PrusaSlicer |image= |type=slicer |platform=Windows, Mac, Linux |license=[https://github.com/prusa3d/PrusaSlicer/blob/master/LICENSE GNU Af...")
- 17:17, 25 June 2019 Lukas talk contribs created page Slicer (Redirected page to Category:Slicers) Tag: New redirect
- 17:15, 25 June 2019 Lukas talk contribs created page Template:PR-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''PR''' manager(s) and is easily updated when responsibilities change. To use...")
- 17:15, 25 June 2019 Lukas talk contribs created page Template:Financial-manager (Created page with "<noinclude> This template links to the user page(s) or our current '''financial''' manager(s) and is easily updated when responsibilities change....")