All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 13:33, 25 January 2024 Lukas talk contribs created page Lipping (Redirected page to Material:Lipping) Tag: New redirect
- 11:31, 25 January 2024 Lukas talk contribs created page Wood Materials (Redirected page to Category:Engineered Woods) Tag: New redirect
- 11:30, 25 January 2024 Lukas talk contribs created page Reformed Wood (Redirected page to Category:Engineered Woods) Tag: New redirect
- 11:29, 25 January 2024 Lukas talk contribs created page Material:Edge Banding (Created page with "{{MaterialInfoBox |material name=Edge Banding |image= |synonyms=edge banding tape,<br>edge tape, "edging";<br>DE: Kantenumleimer, Bügelkante |available=usually some leftovers |donation= |location=gluing area |tools=flatiron; box cutter or router |used with=particle board, MDF, plywood |contains=plastic or veneer;<br>hot-melt glue |similar=lipping }} Edge banding can give a decora...")
- 11:17, 25 January 2024 Lukas talk contribs created page Edge Banding (Redirected page to Material:Edge Banding) Tag: New redirect
- 23:48, 24 January 2024 Lukas talk contribs uploaded a new version of File:Sauter OFL2.0 Router Table Spindle unlocked.jpg.jpg (fixed orientation)
- 21:12, 24 January 2024 Lukas talk contribs created page Material:Stainless Steel (Created page with "{{MaterialInfoBox |material name=Stainless Steel |image= |synonyms=Inox, rustless steel,<br>corrosion-resistant steel (CRES);<br>DE: Edelstahl, rostfreier Stahl,<br>nichtrostender Stahl ("NiRo") |available= |donation= |location= |tools=many metalworking tools |used with= |contains=steel, chromium |similar= }} Stainless steel is worked with many similar tools as regular steel, but there are differences! Make sure to check whether you need special blades/bits/...")
- 20:56, 24 January 2024 Lukas talk contribs created page Resawing (Created page with "thumb|right|resawing a very thin board which will become the bottom of a [[Project:Würfelturm|special bandsaw box]] Resawing is the process of cutting a piece of wood lengthwise across its thickness. Sounds complicated? Try "cutting one board into two thinner boards" ;-) For Maker projects, the machines you resaw with are typically bandsaws or table saws. Further reading: [https://www.finepowertools.com/saws/resawing/ FineP...")
- 00:26, 24 January 2024 Johannes talk contribs created page File:Welding pressure gauge.jpg
- 00:26, 24 January 2024 Johannes talk contribs uploaded File:Welding pressure gauge.jpg
- 23:50, 23 January 2024 Johannes talk contribs created page File:BT-GW 150 Front.jpg
- 23:50, 23 January 2024 Johannes talk contribs uploaded File:BT-GW 150 Front.jpg
- 10:59, 22 January 2024 Johannes talk contribs created page File:Druckminderer Schutzgas.jpg
- 10:59, 22 January 2024 Johannes talk contribs uploaded File:Druckminderer Schutzgas.jpg
- 10:55, 22 January 2024 Johannes talk contribs created page File:Schutzgas-Schweissgerät BT-GW 150.jpg
- 10:55, 22 January 2024 Johannes talk contribs uploaded File:Schutzgas-Schweissgerät BT-GW 150.jpg
- 10:22, 22 January 2024 Johannes talk contribs created page Einhell BT-GW 150 (Created page with "Schutzschweißgerät von Einhell {{MachineInfoBox|machine name=welding machine|german=Schutzschweißgerät|synonyms=Schutzschweißgerät|status=commissioning|material=Metal|location=Office|access=Arc Welding Introduction|manual=https://assets.einhell.com/manuals-pdf/900_177283/BT-GW%20150.pdf}}") Tag: Visual edit
- 00:00, 22 January 2024 Lukas talk contribs created page Stainless Steel (Redirected page to Material:Stainless Steel) Tag: New redirect
- 23:59, 21 January 2024 Lukas talk contribs created page Edelstahl (Redirected page to Material:Stainless Steel) Tag: New redirect
- 21:22, 21 January 2024 Lukas talk contribs uploaded a new version of File:Wood workshop 2.JPG (we moved three years ago ;-))
- 16:07, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Bit Height.webm
- 16:07, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Bit Height.webm
- 16:07, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Fence Gap.webm
- 16:07, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Fence Gap.webm
- 16:06, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Guard.webm
- 16:06, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Guard.webm
- 16:06, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Fence Adjustment.webm
- 16:06, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Fence Adjustment.webm
- 16:03, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table In Action.webm
- 16:03, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table In Action.webm
- 15:51, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Changing Bit.webm
- 15:51, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Changing Bit.webm
- 15:43, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Changing Plates.jpg.jpg
- 15:43, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Changing Plates.jpg.jpg
- 15:40, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Mitre Gauge.jpg.jpg
- 15:40, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Mitre Gauge.jpg.jpg
- 15:36, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Fence.jpg.jpg
- 15:36, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Fence.jpg.jpg
- 15:35, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Fance Knobs.jpg.jpg
- 15:35, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Fance Knobs.jpg.jpg
- 15:31, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table Spindle unlocked.jpg.jpg
- 15:31, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table Spindle unlocked.jpg.jpg
- 15:22, 21 January 2024 Pakue talk contribs created page File:Sauter OFL2.0 Router Table.jpg
- 15:22, 21 January 2024 Pakue talk contribs uploaded File:Sauter OFL2.0 Router Table.jpg
- 15:42, 20 January 2024 Lukas talk contribs created page File:Bandsaw danger zone.jpg (If a vertical bandsaw blade snaps, the dangerous area is on the outside of the circle it originally described (on the Metabo BS 1638 W: right side))
- 15:42, 20 January 2024 Lukas talk contribs uploaded File:Bandsaw danger zone.jpg (If a vertical bandsaw blade snaps, the dangerous area is on the outside of the circle it originally described (on the Metabo BS 1638 W: right side))
- 15:24, 20 January 2024 Lukas talk contribs created page Deburrer (Created page with "{{ToolInfoBox |tool name=Deburrer |german=Entgrater |image= |synonyms=manual deburring tool, handheld deburring tool; DE: Entgrater, Universal-Entgrater |type= |status= |material=metals, plastics |used with= |location=Metal Workbench |access= |tutors= |manual= |donation= |similar= }} A deburrer is normally used to remove the sharp edges (burrs) you get after many metalworking operations. File:deburring a 3D print.jpg|thumb|right|3D prints with many hol...")
- 15:23, 20 January 2024 Lukas talk contribs created page File:Deburring a 3D print.jpg (Removing "noses" and strings from a 3D print with a deburrer)
- 15:23, 20 January 2024 Lukas talk contribs uploaded File:Deburring a 3D print.jpg (Removing "noses" and strings from a 3D print with a deburrer)
- 13:44, 20 January 2024 Lukas talk contribs created page File:Welding transformer top right.jpg (Unknown Welding Transformer, top view (setting indicator is barely visible just above 70 A))
- 13:44, 20 January 2024 Lukas talk contribs uploaded File:Welding transformer top right.jpg (Unknown Welding Transformer, top view (setting indicator is barely visible just above 70 A))
- 13:42, 20 January 2024 Lukas talk contribs created page File:Welding transformer front.jpg (Unknown Welding Transformer, front view)
- 13:42, 20 January 2024 Lukas talk contribs uploaded File:Welding transformer front.jpg (Unknown Welding Transformer, front view)
- 13:21, 20 January 2024 Lukas talk contribs created page File:Welding gloves.jpg (Welding Gloves)
- 13:21, 20 January 2024 Lukas talk contribs uploaded File:Welding gloves.jpg (Welding Gloves)
- 13:20, 20 January 2024 Lukas talk contribs uploaded a new version of File:Welding enclosure - outside.JPG (new photo after the 2023 re-opening in the new building)
- 13:00, 20 January 2024 Lukas talk contribs created page Property:Introduction for (Created page with "This property allows us to automatically link a certain introduction from all the different machine pages it may be relevant for. Has type::Page")
- 12:55, 20 January 2024 Lukas talk contribs created page Sliding Table Saw Introduction (basic structure)
- 01:00, 20 January 2024 NitramLegov talk contribs created page Asset:COMS00156 (Automatic Asset Data Sync)
- 23:08, 19 January 2024 Pakue talk contribs created page Sauter OFL2.0 Router Table (init)
- 14:25, 18 January 2024 Lennart talk contribs created page File:Holmos cheek unwrapped.png
- 14:25, 18 January 2024 Lennart talk contribs uploaded File:Holmos cheek unwrapped.png
- 14:25, 18 January 2024 Lennart talk contribs created page File:Holmos cheek fft.png
- 14:25, 18 January 2024 Lennart talk contribs uploaded File:Holmos cheek fft.png
- 14:25, 18 January 2024 Lennart talk contribs created page File:Holmos cheek interference.png
- 14:25, 18 January 2024 Lennart talk contribs uploaded File:Holmos cheek interference.png
- 14:23, 18 January 2024 Lennart talk contribs created page File:Holmos cheek wrapped.png
- 14:23, 18 January 2024 Lennart talk contribs uploaded File:Holmos cheek wrapped.png
- 14:14, 18 January 2024 Lennart talk contribs created page File:Holmos emulator.jpg
- 14:14, 18 January 2024 Lennart talk contribs uploaded File:Holmos emulator.jpg
- 13:56, 18 January 2024 Lennart talk contribs created page File:Holmos objective mount stl.png
- 13:56, 18 January 2024 Lennart talk contribs uploaded File:Holmos objective mount stl.png
- 12:46, 18 January 2024 Lennart talk contribs created page File:Holmos setup comakingspace.jpeg
- 12:46, 18 January 2024 Lennart talk contribs uploaded File:Holmos setup comakingspace.jpeg
- 23:59, 17 January 2024 NitramLegov talk contribs moved page Prusa i3 MK3S to Prusa i3 MK3S+ (Fix type of machine)
- 23:31, 17 January 2024 Leo talk contribs created page Lötzian (Created page with "{{ProjectInfoBox |project title="Lötzian" Solder Dispenser |image=Solderdispenser.jpg |status=Done |date=17.1.2024 |initiator=Leo |materials=Scrap wood |tools=Handsäge, Raspel }} ''How to kill 30 Minutes of waiting for someone to finish an introduction'' I had time to kill and decided to goof off *while* doing something productive. Revolutionary concept. Issue [https://github.com/comakingspace/do-something/issues/297 #297] was calling out. A idea for a pun...")
- 23:21, 17 January 2024 Leo talk contribs created page File:Solderdispenser assembly.jpg
- 23:21, 17 January 2024 Leo talk contribs uploaded File:Solderdispenser assembly.jpg
- 23:19, 17 January 2024 Leo talk contribs created page File:Solderdispenser.jpg
- 23:19, 17 January 2024 Leo talk contribs uploaded File:Solderdispenser.jpg
- 23:19, 17 January 2024 Leo talk contribs created page File:Solderdispenser tacks.jpg
- 23:19, 17 January 2024 Leo talk contribs uploaded File:Solderdispenser tacks.jpg
- 23:18, 17 January 2024 Leo talk contribs created page File:Solderdispenser wip.jpg
- 23:18, 17 January 2024 Leo talk contribs uploaded File:Solderdispenser wip.jpg
- 14:59, 17 January 2024 Lukas talk contribs created page Brush (Redirected page to Brushes) Tag: New redirect
- 23:44, 16 January 2024 Lukas talk contribs created page Fahrradschlauch (Redirected page to Material:Bicycle Inner Tube) Tag: New redirect
- 23:33, 16 January 2024 Lukas talk contribs created page File:Flaschenlampe00.jpg (Project:Flaschenlampe)
- 23:33, 16 January 2024 Lukas talk contribs uploaded File:Flaschenlampe00.jpg (Project:Flaschenlampe)
- 23:32, 16 January 2024 Lukas talk contribs created page File:Flaschenlampe04.jpg (Project:Flaschenlampe)
- 23:32, 16 January 2024 Lukas talk contribs uploaded File:Flaschenlampe04.jpg (Project:Flaschenlampe)
- 23:31, 16 January 2024 Lukas talk contribs created page File:Flaschenlampe03.jpg (Project:Flaschenlampe)
- 23:31, 16 January 2024 Lukas talk contribs uploaded File:Flaschenlampe03.jpg (Project:Flaschenlampe)
- 23:31, 16 January 2024 Lukas talk contribs created page File:Flaschenlampe02.jpg (Project:Flaschenlampe)
- 23:31, 16 January 2024 Lukas talk contribs uploaded File:Flaschenlampe02.jpg (Project:Flaschenlampe)
- 23:30, 16 January 2024 Lukas talk contribs created page File:Flaschenlampe01.jpg (Project:Flaschenlampe)
- 23:30, 16 January 2024 Lukas talk contribs uploaded File:Flaschenlampe01.jpg (Project:Flaschenlampe)
- 12:06, 16 January 2024 MaliMae talk contribs created page MaliMae (created redirect for user page) Tag: New redirect
- 12:06, 16 January 2024 MaliMae talk contribs created page User:MaliMae (create user page)
- 01:00, 16 January 2024 NitramLegov talk contribs created page Asset:COMS00155 (Automatic Asset Data Sync)
- 15:06, 15 January 2024 Johannes talk contribs created page Prusa i3 MK3S (Created page with "==Prusa i3 MK3S== {{MachineInfoBox |machine name=Original Prusa i3 MK3S |image= |synonyms= |type=3D Printer |material=plastic filament |location=Location::3D Printing Area |status=Operational |firmware=https://www.prusa3d.com/drivers/ |software=Slic3r Prusa Edition |manual=[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf prusa3d.com] |assetid=5 }}In addition to receiving a personal introduction from one of the tutors...") Tag: Visual edit
- 13:56, 15 January 2024 FabianM talk contribs created page Wanted talk:Pocket Hole Jig (Created page with "I bought a Wolfcraft Undercover Jig for myself. Happy to share with other co-makers if needed. -> User:FabianM") Tag: Visual edit
- 18:26, 14 January 2024 DMaennle talk contribs created page DMaennle (created redirect for user page) Tag: New redirect
- 18:26, 14 January 2024 DMaennle talk contribs created page User:DMaennle (create user page)
- 17:24, 14 January 2024 HenrikG talk contribs created page HenrikG (created redirect for user page) Tag: New redirect
- 17:24, 14 January 2024 HenrikG talk contribs created page User:HenrikG (create user page)
- 14:54, 13 January 2024 User account DMaennle talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 14:50, 13 January 2024 User account MaliMae talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 19:17, 12 January 2024 No.shoes talk contribs created page No.shoes (created redirect for user page) Tag: New redirect
- 19:17, 12 January 2024 No.shoes talk contribs created page User:No.shoes (create user page)
- 14:13, 12 January 2024 Lukas talk contribs created page Schleifband (Redirected page to Belt and Disc Sander) Tag: New redirect
- 02:04, 11 January 2024 Lukas talk contribs created page File:Horizontal bandsaw.jpg (Closeup of a Horizontal Bandsaw cutting through an Aluminum Extrusion)
- 02:04, 11 January 2024 Lukas talk contribs uploaded File:Horizontal bandsaw.jpg (Closeup of a Horizontal Bandsaw cutting through an Aluminum Extrusion)
- 02:02, 11 January 2024 Lukas talk contribs uploaded a new version of File:Herkules HMB 4000 Horizontal Bandsaw.jpg (in use, not during transport)
- 01:55, 11 January 2024 Lukas talk contribs created page File:Horizontal bandsaw blade angle.jpg (Bandsaw Jig used on the Horizontal Bandsaw)
- 01:55, 11 January 2024 Lukas talk contribs uploaded File:Horizontal bandsaw blade angle.jpg (Bandsaw Jig used on the Horizontal Bandsaw)
- 01:30, 11 January 2024 Lukas talk contribs created page Bandsaw Jig (Created page with "{{ToolInfoBox |tool name=Bandsaw Jig |german= |image= |synonyms=DE: Bandsägen-Einstellhilfe, "Bandsägenlineal" |type=measuring jig |status= |material= |used with=square, bevel gauge or goniometer |location=Location::Saw Station |access= |tutors= |manual= |donation= |similar= }} This simple jig lets you measure a bandsaw blade's precise direction by prolonging the straight back of the band while "skipping" the altern...")
- 01:00, 11 January 2024 NitramLegov talk contribs created page Asset:COMS00154 (Automatic Asset Data Sync)
- 23:04, 8 January 2024 Lukas talk contribs created page Herkules HMB 4000 (outsourced from "Horizontal Bandsaw")
- 01:00, 8 January 2024 NitramLegov talk contribs created page Asset:COMS00153 (Automatic Asset Data Sync)
- 09:58, 7 January 2024 Lukas talk contribs created page Zapfensäge (Redirected page to Backsaws#Tenon Saws) Tag: New redirect
- 09:53, 7 January 2024 Lukas talk contribs created page File:Würfelturm16-2.jpg (Project:Würfelturm)
- 09:53, 7 January 2024 Lukas talk contribs uploaded File:Würfelturm16-2.jpg (Project:Würfelturm)
- 09:53, 7 January 2024 Lukas talk contribs created page File:Würfelturm21.jpg (Project:Würfelturm)
- 09:53, 7 January 2024 Lukas talk contribs uploaded File:Würfelturm21.jpg (Project:Würfelturm)
- 00:58, 7 January 2024 Lukas talk contribs moved page Wanted:Staplers to Staplers over a redirect without leaving a redirect
- 00:58, 7 January 2024 Lukas talk contribs deleted redirect Staplers by overwriting (Deleted to make way for move from "Wanted:Staplers")
- 00:57, 7 January 2024 Lukas talk contribs deleted page Staple gun (fusion with "Staplers" - content was: "{{ToolInfoBox |tool name=Staple Gun |image=Staple_gun.jpg |synonyms=DE: Handtacker, Nagler |type=hand tool |access= |location= wood workshop |material=wood, soft sheet materials<br>(e.g. paper or fabric) }} A manual staple gun drives staples straight into a substrate without folding them...", and the only contributor was "Meyerml" (talk))
- 00:46, 7 January 2024 Lukas talk contribs created page File:Bench hook pull.jpg (A Bench Hook used at the back instead of front of the workbench to facilitate pull cuts)
- 00:46, 7 January 2024 Lukas talk contribs uploaded File:Bench hook pull.jpg (A Bench Hook used at the back instead of front of the workbench to facilitate pull cuts)
- 00:43, 7 January 2024 Lukas talk contribs uploaded a new version of File:Bench hook.JPG
- 00:23, 7 January 2024 Lukas talk contribs created page Planing (Redirected page to Category:Planes) Tag: New redirect
- 20:12, 6 January 2024 Lukas talk contribs created page Card Scrapers (Created page with "{{ToolInfoBox |tool name=Card Scrapers |german=Ziehklingen |image=handled card scraper.jpg |synonyms=cabinet scrapers, floor scrapers, ''(handled variant)'', "scrapers"; DE: Ziehklingen |type= |status= |material=wood |used with= |location=Location::Glueing Area |access= |tutors= |manual= |donation= |similar=sandpaper }} Card scrapers are pulled or pushed over a workpiece to smoothen it by removing extremely thin shavings. After planing, you can use them i...")
- 20:10, 6 January 2024 Lukas talk contribs created page File:Card scraper shavings.jpg (A Card Scraper taking super-thin shavings off a wooden surface Still from video footage by Pakue)
- 20:10, 6 January 2024 Lukas talk contribs uploaded File:Card scraper shavings.jpg (A Card Scraper taking super-thin shavings off a wooden surface Still from video footage by Pakue)
- 19:49, 6 January 2024 Lukas talk contribs created page File:Handled card scraper.jpg (Removing paint with a card scraper with a wooden handle (aka [https://www.kirschen-shop.de/de/3803000_Parkettbodenreiniger-mit-Holzheft-Breite-120-mm_p3803.html Parkettbodenreiniger))
- 19:49, 6 January 2024 Lukas talk contribs uploaded File:Handled card scraper.jpg (Removing paint with a card scraper with a wooden handle (aka [https://www.kirschen-shop.de/de/3803000_Parkettbodenreiniger-mit-Holzheft-Breite-120-mm_p3803.html Parkettbodenreiniger))
- 16:46, 6 January 2024 Lukas talk contribs created page Ziehklinge (Redirected page to Card Scrapers) Tag: New redirect
- 16:45, 6 January 2024 Lukas talk contribs created page Band- und Tellerschleifer (Redirected page to Belt and Disc Sander) Tag: New redirect
- 16:30, 6 January 2024 Lukas talk contribs created page File:Würfelturm done.jpg (Project:Würfelturm)
- 16:30, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm done.jpg (Project:Würfelturm)
- 16:29, 6 January 2024 Lukas talk contribs created page File:Würfelturm20.jpg (Project:Würfelturm)
- 16:29, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm20.jpg (Project:Würfelturm)
- 16:29, 6 January 2024 Lukas talk contribs created page File:Würfelturm19.jpg (Project:Würfelturm)
- 16:29, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm19.jpg (Project:Würfelturm)
- 16:28, 6 January 2024 Lukas talk contribs created page File:Würfelturm18.jpg (Project:Würfelturm)
- 16:28, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm18.jpg (Project:Würfelturm)
- 16:27, 6 January 2024 Lukas talk contribs created page File:Würfelturm17.jpg (Project:Würfelturm)
- 16:27, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm17.jpg (Project:Würfelturm)
- 16:26, 6 January 2024 Lukas talk contribs created page File:Würfelturm16.jpg (Project:Würfelturm)
- 16:26, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm16.jpg (Project:Würfelturm)
- 16:26, 6 January 2024 Lukas talk contribs created page File:Würfelturm15.jpg (Project:Würfelturm)
- 16:26, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm15.jpg (Project:Würfelturm)
- 14:16, 6 January 2024 Lukas talk contribs created page File:Würfelturm14.jpg (Project:Würfelturm)
- 14:16, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm14.jpg (Project:Würfelturm)
- 14:15, 6 January 2024 Lukas talk contribs created page File:Würfelturm13.jpg (Project:Würfelturm)
- 14:15, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm13.jpg (Project:Würfelturm)
- 14:15, 6 January 2024 Lukas talk contribs created page File:Würfelturm12.jpg (Project:Würfelturm)
- 14:15, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm12.jpg (Project:Würfelturm)
- 14:14, 6 January 2024 Lukas talk contribs created page File:Würfelturm11.jpg (Project:Würfelturm)
- 14:14, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm11.jpg (Project:Würfelturm)
- 14:13, 6 January 2024 Lukas talk contribs created page File:Würfelturm10.jpg (Project:Würfelturm)
- 14:13, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm10.jpg (Project:Würfelturm)
- 14:12, 6 January 2024 Lukas talk contribs created page File:Würfelturm09.jpg (Project:Würfelturm)
- 14:12, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm09.jpg (Project:Würfelturm)
- 14:10, 6 January 2024 Lukas talk contribs created page File:Würfelturm08.jpg (Project:Würfelturm)
- 14:10, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm08.jpg (Project:Würfelturm)
- 14:09, 6 January 2024 Lukas talk contribs created page File:Würfelturm07.jpg (Project:Würfelturm)
- 14:09, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm07.jpg (Project:Würfelturm)
- 14:08, 6 January 2024 Lukas talk contribs created page File:Würfelturm06.jpg (Project:Würfelturm)
- 14:08, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm06.jpg (Project:Würfelturm)
- 14:07, 6 January 2024 Lukas talk contribs created page File:Würfelturm05.jpg (Project:Würfelturm)
- 14:07, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm05.jpg (Project:Würfelturm)
- 14:05, 6 January 2024 Lukas talk contribs created page File:Würfelturm04.jpg (Project:Würfelturm)
- 14:05, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm04.jpg (Project:Würfelturm)
- 14:04, 6 January 2024 Lukas talk contribs created page File:Würfelturm03.jpg (Project:Würfelturm)
- 14:04, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm03.jpg (Project:Würfelturm)
- 13:53, 6 January 2024 Lukas talk contribs created page File:Würfelturm02.png (Project:Würfelturm)
- 13:53, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm02.png (Project:Würfelturm)
- 13:52, 6 January 2024 Lukas talk contribs created page File:Würfelturm01.jpg (Project:Würfelturm)
- 13:52, 6 January 2024 Lukas talk contribs uploaded File:Würfelturm01.jpg (Project:Würfelturm)
- 00:55, 24 December 2023 NitramLegov talk contribs changed group membership for NitramLegov from bureaucrat, interface administrator, administrator (Semantic MediaWiki), curator (Semantic MediaWiki), editor (Semantic MediaWiki) and administrator to bureaucrat, interface administrator, administrator (Semantic MediaWiki), curator (Semantic MediaWiki), editor (Semantic MediaWiki), administrator and bot
- 21:29, 20 December 2023 Micha talk contribs created page File:Font selection for name plate.png
- 21:29, 20 December 2023 Micha talk contribs uploaded File:Font selection for name plate.png
- 19:59, 17 December 2023 Jaggi2 talk contribs created page File:Wuerfelturm MDF.jpg
- 19:59, 17 December 2023 Jaggi2 talk contribs uploaded File:Wuerfelturm MDF.jpg
- 19:50, 17 December 2023 Jaggi2 talk contribs created page Project:Würfelturm MDF (creating the page) Tag: Visual edit
- 19:48, 17 December 2023 Jaggi2 talk contribs created page File:Top view.jpg
- 19:48, 17 December 2023 Jaggi2 talk contribs uploaded File:Top view.jpg
- 19:45, 17 December 2023 Jaggi2 talk contribs created page File:Wuerfelturm 1.jpg
- 19:45, 17 December 2023 Jaggi2 talk contribs uploaded File:Wuerfelturm 1.jpg
- 14:02, 17 December 2023 Lennerhardt talk contribs created page Lennerhardt (created redirect for user page) Tag: New redirect
- 14:02, 17 December 2023 Lennerhardt talk contribs created page User:Lennerhardt (create user page)
- 10:25, 14 December 2023 Baumphil talk contribs created page File:Tisch.jpg
- 10:25, 14 December 2023 Baumphil talk contribs uploaded File:Tisch.jpg
- 10:23, 14 December 2023 Baumphil talk contribs created page File:Stuhl.jpg
- 10:23, 14 December 2023 Baumphil talk contribs uploaded File:Stuhl.jpg
- 10:19, 14 December 2023 Baumphil talk contribs created page Baumphil (created redirect for user page) Tag: New redirect
- 10:19, 14 December 2023 Baumphil talk contribs created page User:Baumphil (create user page)
- 05:00, 14 December 2023 User account Jaennerich talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 04:56, 14 December 2023 User account Lennerhardt talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 04:53, 14 December 2023 User account Baumphil talk contribs was created by Lukas talk contribs and password was sent by email (new member!)
- 17:15, 10 December 2023 Johannes talk contribs created page Horizontal Bandsaw Introduction (Created page with "s")
- 16:50, 10 December 2023 Johannes talk contribs created page File:Herkules HMB 4000 Horizontal Bandsaw.jpg
- 16:50, 10 December 2023 Johannes talk contribs uploaded File:Herkules HMB 4000 Horizontal Bandsaw.jpg
- 16:03, 10 December 2023 Finno talk contribs created page File:SNowflake.jpg
- 16:03, 10 December 2023 Finno talk contribs uploaded File:SNowflake.jpg
- 16:02, 10 December 2023 Finno talk contribs created page File:Glue up.jpg
- 16:02, 10 December 2023 Finno talk contribs uploaded File:Glue up.jpg
- 16:01, 10 December 2023 Finno talk contribs created page File:Push block cuts.jpg
- 16:01, 10 December 2023 Finno talk contribs uploaded File:Push block cuts.jpg
- 15:54, 10 December 2023 Finno talk contribs created page File:Cuts Started.jpg
- 15:54, 10 December 2023 Finno talk contribs uploaded File:Cuts Started.jpg
- 15:53, 10 December 2023 Finno talk contribs created page File:Blank Stock.jpg
- 15:53, 10 December 2023 Finno talk contribs uploaded File:Blank Stock.jpg
- 15:45, 10 December 2023 Finno talk contribs created page Project:Snowflake (New project that I am working on for the winter season)
- 20:51, 7 December 2023 Lukas talk contribs created page File:Bottle cutting.jpg (Repeated temperature shocks (white bucket: ice water; black bucket & kettle: hot water) break a bottle that was scored with the Bottle Cutter)
- 20:51, 7 December 2023 Lukas talk contribs uploaded File:Bottle cutting.jpg (Repeated temperature shocks (white bucket: ice water; black bucket & kettle: hot water) break a bottle that was scored with the Bottle Cutter)
- 14:14, 3 December 2023 Finno talk contribs created page Project:Foiling (Project page for the process of 'Foiling'; how i made my members wall poster)
- 13:47, 3 December 2023 Finno talk contribs created page File:Foil Peel Video - Trim.mp4 (Hot foil transfer proof oc concept/ fun :))
- 13:47, 3 December 2023 Finno talk contribs uploaded File:Foil Peel Video - Trim.mp4 (Hot foil transfer proof oc concept/ fun :))
- 13:45, 3 December 2023 Finno talk contribs created page File:Member wall poster.jpg (Hot foil transfer proof oc concept/ fun :))
- 13:45, 3 December 2023 Finno talk contribs uploaded File:Member wall poster.jpg (Hot foil transfer proof oc concept/ fun :))
- 12:00, 3 December 2023 Finno talk contribs created page File:Bike Lock Holder.jpg
- 12:00, 3 December 2023 Finno talk contribs uploaded File:Bike Lock Holder.jpg
- 11:53, 3 December 2023 Finno talk contribs created page File:Mamad 3D Model.png
- 11:53, 3 December 2023 Finno talk contribs uploaded File:Mamad 3D Model.png
- 11:34, 3 December 2023 Finno talk contribs created page File:Madlén V2 Prusa layout.png
- 11:34, 3 December 2023 Finno talk contribs uploaded File:Madlén V2 Prusa layout.png
- 11:34, 3 December 2023 Finno talk contribs created page File:Madlén `V1.1 Parts.jpg
- 11:34, 3 December 2023 Finno talk contribs uploaded File:Madlén `V1.1 Parts.jpg
- 11:33, 3 December 2023 Finno talk contribs created page File:Madlén V1 in situ.jpg
- 11:33, 3 December 2023 Finno talk contribs uploaded File:Madlén V1 in situ.jpg
- 11:33, 3 December 2023 Finno talk contribs created page File:Madlén foot V1.jpg
- 11:33, 3 December 2023 Finno talk contribs uploaded File:Madlén foot V1.jpg
- 11:10, 3 December 2023 Finno talk contribs created page File:Assist.svg
- 11:10, 3 December 2023 Finno talk contribs uploaded File:Assist.svg
- 10:46, 3 December 2023 Finno talk contribs created page Project:Assist (higlighting project assist's because helping others realize their ideas is awesome.)
- 16:18, 19 November 2023 Lukas talk contribs created page Panel Saw (Redirected page to Sliding Table Saw) Tag: New redirect
- 16:16, 19 November 2023 Lukas talk contribs created page Formatkreissäge (Redirected page to Sliding Table Saw) Tag: New redirect
- 11:49, 19 November 2023 Lukas talk contribs created page Altendorf F 45 (Created page with "{{MachineInfoBox |machine name=Altendorf F 45 |german=Formatkreissäge |image= |synonyms=sliding panel saw, horizontal panel saw |type=Sliding Table Saw |material= |location= |status=in commissioning |firmware= |software= |manual= |used with= |similar=table saw |assetid= }} This used sliding table saw from 1985 will be a great addition to our wood workshop after it receives some loving care! {{Commissioning |IssueNum...")
- 08:21, 19 November 2023 Lukas talk contribs created page Sliding Table Saw (Created page with "A sliding table saw ''(Formatkreissäge)'' is a (much) bigger, professional version of a table saw. <br clear="all" /> <!-- NOTE: The following block "imports" content from separate pages - please don't change the code! To edit the actual information, please go back and click "edit" next to the section headline you are interested in :-) --> {{#ask: MachineType::Sliding Table Saw |order=ascending |format=embedded |embedonly=yes }} Category:Saw...")
- 23:52, 16 November 2023 Lorenz talk contribs created page File:Do not cut from front.png (When cutting into a board (brown) at an angle it is important to not move into the board from the front parallel to the surface of the board for example with a router attachment (blue) or it will cut out more than intended (red). Either one needs to cut into the board from the side or from the front but at the desired angle (not sure how to do this in practice).)
- 23:52, 16 November 2023 Lorenz talk contribs uploaded File:Do not cut from front.png (When cutting into a board (brown) at an angle it is important to not move into the board from the front parallel to the surface of the board for example with a router attachment (blue) or it will cut out more than intended (red). Either one needs to cut into the board from the side or from the front but at the desired angle (not sure how to do this in practice).)
- 22:07, 15 November 2023 Lorenz talk contribs created page File:Good drying rig.jpg
- 22:07, 15 November 2023 Lorenz talk contribs uploaded File:Good drying rig.jpg
- 21:58, 15 November 2023 Lorenz talk contribs created page File:Bad drying rig.jpg
- 21:58, 15 November 2023 Lorenz talk contribs uploaded File:Bad drying rig.jpg
- 21:42, 15 November 2023 Lorenz talk contribs uploaded a new version of File:Arcade machine.jpg (cropped)
- 21:40, 15 November 2023 Lorenz talk contribs uploaded a new version of File:Arcade machine.jpg (rotated)
- 21:35, 15 November 2023 Lorenz talk contribs created page File:Arcade machine.jpg (Finished arcade machine running Street Fighter 2)