All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 10:46, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 05.JPG (Project:Tree Trunk Tealights we proceeded with sanding off the mold and applying some leftover hard wax oil to cover the cut faces against new mold formation)
- 10:44, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 04.JPG (Project:Tree Trunk Tealights after the cut pieces were left sitting on my CoMaking bench for a week, a lot of mold had formed again -.-)
- 10:41, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 03.JPG (Project:Tree Trunk Tealights where the logs were too thick for the rather small chop saw, manual labor with a crosscut saw was necessary)
- 10:39, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 02.JPG (Project:Tree Trunk Tealights I used the chop saw to cut the logs into approx. 8-10 cm long pieces)
- 10:35, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 01.JPG (Project:Tree Trunk Tealights the store-bought birch logs were a lot wetter than expected and started to grow mold within a few weeks...)
- 21:47, 20 February 2019 User account Korbi talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:14, 15 February 2019 Lukas talk contribs uploaded File:Project gallery.png ({{NavGal}} of our documented Projects as of 2019-2-11)
- 14:44, 7 February 2019 User account Ali talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 02:25, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 15.JPG ("Lumberjack Championship" inspired wedding cake stand used as a plant display after another wedding)
- 02:18, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 14.JPG (one of the boards for my "Lumberjack Championship" inspired wedding cake stand after sanding and application of coconut oil)
- 02:15, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 13.JPG (drilling screw holes into the wedges of my "Lumberjack Championship" inspired wedding cake stand - just to be safe, ''might'' also have been stable without them)
- 02:13, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 12.JPG (testing the strength of my "Lumberjack Championship" inspired wedding cake stand)
- 02:09, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 11.JPG (cutting more wedges out of my "Lumberjack Championship" inspired wedding cake stand...)
- 02:08, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 10.JPG (test-fitting boards and setting the angle for the second wedge to cut out of my "Lumberjack Championship" inspired wedding cake stand)
- 02:06, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 09.JPG (cutting the first wedge out of my "Lumberjack Championship" inspired wedding cake stand with a Japanese saw)
- 02:04, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 08.JPG (feet of my "Lumberjack Championship" inspired wedding cake stand shortened to fit the table it would be used on)
- 02:01, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 07.JPG (feet of my "Lumberjack Championship" inspired wedding cake stand fitted & screwed in)
- 02:00, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 06.JPG (cutting the groove for the second foot of my "Lumberjack Championship" inspired wedding cake stand with a Japanese saw)
- 01:59, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 05.JPG (first foot of my "Lumberjack Championship" inspired wedding cake stand fits in nicely)
- 01:58, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 04.JPG (chopping grooves for the feet of my "Lumberjack Championship" inspired wedding cake stand with a bevel edge chisel)
- 01:56, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 03.JPG (cutting grooves for the feet of my "Lumberjack Championship" inspired wedding cake stand with a Japanese saw)
- 01:51, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 02.JPG (''Robinia'' log for my "Lumberjack Championship" inspired wedding cake stand after getting its top end sealed with a wood glue and water mixture for uniform drying)
- 01:47, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 01.JPG (first small-scale prototype of my "Lumberjack Championship" inspired wedding cake stand out of some firewood and a breakfast board)
- 01:43, 3 February 2019 Lukas talk contribs uploaded File:Lumberjack cake stand 00.jpg (finished "Lumberjack Championship" inspired wedding cake stand with cakes on it)
- 00:08, 2 February 2019 Lukas talk contribs uploaded File:Clear lacquer.JPG (a can of clear laquer with a dripping paintbrush)
- 11:35, 31 January 2019 User account Isensee talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:37, 28 January 2019 Lukas talk contribs uploaded File:Old flatiron.JPG (an old flatiron that can be used for "dirty work", e.g. applying edge banding or ironing wax into fabric)
- 17:56, 28 January 2019 Lukas talk contribs uploaded File:Pliers-style saw set.JPG (A pliers-style saw set)
- 21:09, 27 January 2019 Lukas talk contribs moved page Wood Lathe to Wood Lathes (plural)
- 00:18, 27 January 2019 Lukas talk contribs uploaded File:Lukas at saw.jpg (Lukas. == License == All rights reserved - no derivatives or unauthorized reproduction!)
- 00:16, 27 January 2019 Lukas talk contribs deleted page File:Lukas.PNG
- 02:42, 17 January 2019 User account Keno talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 02:15, 17 January 2019 User account Manu talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:56, 17 January 2019 User account Ignaz talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 01:51, 17 January 2019 Lukas talk contribs uploaded a new version of File:Familienmitgliedschaft.pdf (updated to 2019)
- 01:50, 17 January 2019 Lukas talk contribs uploaded a new version of File:Mitgliedsantrag.pdf (updated to 2019)
- 18:49, 16 January 2019 User account Malte talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 20:34, 13 January 2019 User account Thomas talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:27, 12 January 2019 User account Woodmansam talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 00:42, 10 January 2019 User account Klangsuche talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:14, 9 January 2019 Lukas talk contribs uploaded a new version of File:Werkstattordnung.pdf (Änderung im Abschnitt "Zugang" ''update for "Zugang"'')
- 18:12, 9 January 2019 Lukas talk contribs uploaded a new version of File:AGB.pdf (Änderung von Punkt 13 (Stand: 9.1.2019) ''update of §13 (2019-1-9)'')
- 20:02, 26 December 2018 Lukas talk contribs uploaded File:Wax wrap Vader.JPG (first test of self-made beeswax wrap as an alternative to aluminum or cling foil ''(Frischhaltefolie)'')
- 19:31, 26 December 2018 Lukas talk contribs uploaded File:Jar jar shelf 7.JPG (late but great update to my "Jar Jar Shelf": putting the glasses in lid-first gives a nice overview of their contents!)
- 16:22, 10 December 2018 Lukas talk contribs moved page Circular Saw to Circular Saws
- 18:25, 3 December 2018 Lukas talk contribs moved page Wanted:Pyrography Burner to Pyrography Burner over redirect
- 18:25, 3 December 2018 Lukas talk contribs deleted redirect Pyrography Burner by overwriting (Deleted to make way for move from "Wanted:Pyrography Burner")
- 00:54, 29 November 2018 User account Lienhart talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 17:51, 26 November 2018 Lukas talk contribs moved page Johannes, was macht die Klingel?? to Johannes, was macht die Klingel without leaving a redirect (dämliche Sonderzeichen)
- 16:25, 23 November 2018 Lukas talk contribs moved page Laser Briefing to Laser Cutter Introduction (fits with the other introduction pages)
- 22:48, 21 November 2018 User account WiNu talk contribs was created by Lukas talk contribs and password was sent by email (wrong eMail on first try...)
- 22:37, 21 November 2018 User account Winu talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 21:49, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 06.JPG (unerwartete Bonusfunktion des Bierkastentisches - die Grifflöcher sind perfekte Schnapsglashalter!)
- 21:42, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 05.jpg (Bierkastentisch in Benutzung (vergleichsweise aufgeräumt))
- 21:40, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 04.JPG (Sorgfältig angeordnete Bohrungen mehrmals zu messen, ist nervig - am besten das erste Stück als Bohrschablone verwenden (hier für Griffe am Bierkastentisch)!)
- 21:37, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 03.JPG (frisch gebohrte Grifflöcher im Bierkastentisch)
- 21:28, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 02.JPG (Bohren der Befestigungslöcher im Bierkastentisch)
- 21:24, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch 01.JPG (Platte für einen Bierkastentisch beim Abschleifen mit dem Exzenterschleifer)
- 21:19, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch SketchUp.PNG (SketchUp-Skizze vom Bierkastentisch im Stil "charcoal loose")
- 21:05, 18 November 2018 Lukas talk contribs uploaded File:Bierkastentisch cover.jpg (fertiger Bierkastentisch im Einsatz)
- 21:01, 18 November 2018 Lukas talk contribs uploaded File:Stopwatch.svg (Icon made by [http://www.freepik.com/ Freepik] by [http://www.flaticon.com/ FlatIcon.com])
- 20:46, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 20.JPG (both resized wardrobe drawers all done & installed!)
- 20:44, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 19.JPG (ripping down the sides of resized wardrobe drawers a bit more so they would fit under a warped shelf)
- 20:41, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 18.JPG (once the first resized wardrobe drawers was in place, it became painfully clear that the shelf above had warped and hung down in the middle...)
- 20:30, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 17.JPG (first installation attempt of a resized wardrobe drawer's slide failed - mounted too low, now raised by a yardstick's thickness)
- 20:28, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 16.JPG (leveling a slide for a resized wardrobe drawer)
- 20:24, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 15.JPG (butt joint of a resized wardrobe drawer drilled & screwed together as marked before)
- 20:21, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 14.JPG (scribing the ideal screw line of a butt joint for resized wardrobe drawers with a marking gauge)
- 20:20, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 13.JPG (sanding the bottom piece for a resized wardrobe drawer)
- 20:18, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 12.JPG (all "wall" pieces for two resized wardrobe drawers cut, routed & drilled)
- 20:16, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 11.JPG (marking the correct hole locations to assemble a resized wardrobe drawer with dowel centers)
- 20:13, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 10.jpg (drilling holes for dowel pegs into the side piece of a resized wardrobe drawer - a bit of masking tape is a great quick & dirty depth stop!)
- 20:11, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 09.JPG (all parts for two resized wardrobe drawers marked according to their place in the final assembly (1/2, left/right))
- 20:09, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 08.JPG (first "dry" fit of a resized wardrobe drawer after cutting & routing)
- 20:06, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 07.JPG (all grooves for the bottom of resized wardrobe drawers (cut on the router table)
- 20:05, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 06.JPG (test piece on the new router table to make sure the groove will turn out right for my resized wardrobe drawers)
- 20:03, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 05.JPG (parts for resized wardrobe drawers fresh off the table saw)
- 19:19, 9 November 2018 Lukas talk contribs moved page Project:Wax Cloth to Project:Beeswax Wrap without leaving a redirect ("wax cloth" may be more appropriate for clothing/backpacks :-P)
- 20:20, 7 November 2018 Lukas talk contribs moved page Bench Grinder to Bench Grinders
- 21:14, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (further exxageration of tip)
- 20:27, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (double line thickness (2 px))
- 20:04, 6 November 2018 Lukas talk contribs uploaded File:Wood screw - sunk full tapping.svg (Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or...)
- 23:47, 5 November 2018 Lukas talk contribs uploaded File:Makita screwdriver bit set.JPG (a basic woodworking set of screwdriver bits)
- 23:46, 5 November 2018 Lukas talk contribs uploaded File:Screwdriver bit organizers.JPG (a couple of screwdriver bits in various organizers)
- 00:50, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 04.JPG (plans for resized wardrobe drawers taking shape on a common room table)
- 00:48, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 03.JPG (one of the old drawers taken apart to take measurements for resized wardrobe drawers)
- 00:45, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 02.JPG (old drawers taken out to allow measurements for a custom resized wardrobe drawer)
- 00:41, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 01.JPG (look at all that wasted space before a custom resized wardrobe drawer was installed...)
- 00:26, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 00.jpg ("before-and-after" comparison of a custom resized wardrobe drawer and the original small one (front))
- 17:08, 4 November 2018 Lukas talk contribs uploaded File:Drill press depth flexibility.JPG (the depth stop on a drill press is sometimes made of a flexible material, reducing its precision - while this can often be ignored, it is important to remember for fine work)
- 17:02, 4 November 2018 Lukas talk contribs uploaded File:Projector mount.JPG (ceiling mount for our projector, inspired by [https://makezine.com/projects/build-six-axis-positioning-platform-stuff-can-buy-hardware-store/ a Makezine project]])
- 16:58, 4 November 2018 Lukas talk contribs uploaded File:Spatulas.JPG (spatulas on the wood workshop wall)
- 16:50, 4 November 2018 Lukas talk contribs uploaded File:Timber on bandsaw.JPG (large bandsaws can easily cut through quite large pieces, such as this part of a log)
- 16:43, 4 November 2018 Lukas talk contribs uploaded File:Holzdübel.JPG (selection of dowel pegs in our wood workshop)
- 11:03, 4 November 2018 Lukas talk contribs uploaded File:Flip dot clock.JPG (our flip dot display acting as a clock)
- 11:00, 4 November 2018 Lukas talk contribs uploaded a new version of File:Cheap woodturning tools.JPG (better lighting; tools in their holder)
- 13:49, 2 November 2018 Lukas talk contribs uploaded a new version of File:Bandsaw guide position - side view.png (explanation integrated into picture)
- 13:35, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw guide position - side view.png (positioning of bandsaw blade guides: * |ab| = 0.5 to 1 mm * |cd| > |ab| annotated with Inkscape)
- 12:49, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw teeth position on flat wheels.JPG (Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca...)
- 12:39, 2 November 2018 Lukas talk contribs uploaded File:Wiki media creation.JPG (two members creating media for our page on jigsaws)