File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 21:20, 9 June 2018 | Projector.jpg (file) |  |
1.5 MB | NitramLegov (talk | contribs) | 1 | |
| 21:12, 9 June 2018 | HP LaserJet 8150DN.JPG (file) |  |
1.15 MB | NitramLegov (talk | contribs) | 1 | |
| 17:59, 9 June 2018 | ShopVac Super K11-SQ14.JPG (file) |  |
5.22 MB | NitramLegov (talk | contribs) | 1 | |
| 17:37, 9 June 2018 | MusicStation.JPG (file) |  |
1.29 MB | NitramLegov (talk | contribs) | 2 | |
| 06:28, 4 June 2018 | Dishwasher.JPG (file) |  |
391 KB | Lukas (talk | contribs) | our dishwasher in the kitchen area | 1 |
| 06:26, 4 June 2018 | Kitchen cabinet.JPG (file) |  |
314 KB | Lukas (talk | contribs) | the bottom left kitchen cabinet, holding stuff like plates and cutlery | 1 |
| 06:21, 4 June 2018 | CoMakingSpace kitchen.JPG (file) |  |
272 KB | Lukas (talk | contribs) | our kitchen area with someone raiding the fridge | 1 |
| 06:07, 4 June 2018 | Snips vs plastic.JPG (file) |  |
373 KB | Lukas (talk | contribs) | although snips are usually used for sheet metal, they are also great for cutting tough plastic packaging! | 1 |
| 05:59, 4 June 2018 | PVC pieces.JPG (file) |  |
253 KB | Lukas (talk | contribs) | two small PVC pieces left over from making holddowns with the CNC router | 1 |
| 05:49, 4 June 2018 | Tangit PVC adhesive.JPG (file) |  |
138 KB | Lukas (talk | contribs) | "Tangit" cleaner and adhesive for PVC. | 1 |
| 05:03, 4 June 2018 | Table saw power supply.JPG (file) |  |
510 KB | Lukas (talk | contribs) | We strongly recommend to use this setup to power the table saw: outlet -> shop vac (set to "Auto") -> foot switch -> table saw. This makes sure the shop vac is automatically turned on with the saw and everything can quickly... | 1 |
| 09:30, 3 June 2018 | Two table saw fences.png (file) |  |
1.83 MB | Lukas (talk | contribs) | As described in the table saw introduction, DO NOT use both table saw fences at once or you could experience kickback! Photo edited with Inkscape. | 2 |
| 00:25, 26 April 2018 | Screw head oval (raised).PNG (file) | .PNG) |
14 KB | Lukas (talk | contribs) | icon of an oval screw head (screenshot of a Tinkercad model) -> very similar: File:screw head countersunk.PNG and File:screw head round.PNG | 1 |
| 00:23, 26 April 2018 | Screw head hex+plate.PNG (file) |  |
18 KB | Lukas (talk | contribs) | icon of an external hex screw head with a "plate" (screenshot of a Tinkercad model) | 1 |
| 00:22, 26 April 2018 | Screw head round.PNG (file) |  |
15 KB | Lukas (talk | contribs) | icon of a rounded screw head (screenshot of a Tinkercad model) -> very similar: File:screw head button.PNG | 1 |
| 00:21, 26 April 2018 | Screw head button.PNG (file) |  |
16 KB | Lukas (talk | contribs) | icon of a "button" screw head (screenshot of a Tinkercad model) | 1 |
| 12:19, 17 April 2018 | SDS bits.JPG (file) |  |
355 KB | Lukas (talk | contribs) | some SDS chisel bits and drill bits for use with a rotary hammer | 1 |
| 12:14, 17 April 2018 | SDS drill bits.jpg (file) |  |
620 KB | Lukas (talk | contribs) | set of SDS drill bits to use with a rotary hammer | 1 |
| 19:36, 4 April 2018 | M radio antenna.JPG (file) |  |
658 KB | Lukas (talk | contribs) | our M-shaped [Project:Roof Sign|antenna/sign on the roof], made windproof with two boxes of rocks | 1 |
| 19:28, 4 April 2018 | Photo table.JPG (file) |  |
373 KB | Lukas (talk | contribs) | Moritz taking a photo of a 3D printed screw on our photo table | 1 |
| 14:53, 28 March 2018 | 3D printer BW.jpg (file) |  |
1.8 MB | Pakue (talk | contribs) | Image of our 3D printer lineup. | 1 |
| 15:17, 25 March 2018 | Trash woodshop.jpg (file) |  |
277 KB | Mitja (talk | contribs) | Trash bags in the wood shop | 1 |
| 15:16, 25 March 2018 | Trash common room.jpg (file) |  |
250 KB | Mitja (talk | contribs) | Trash bags in the common room | 1 |
| 15:15, 25 March 2018 | Scrap wood.jpg (file) |  |
244 KB | Mitja (talk | contribs) | 1 | |
| 15:15, 25 March 2018 | Firewood box.jpg (file) |  |
265 KB | Mitja (talk | contribs) | 1 | |
| 15:15, 25 March 2018 | Broken tools.jpg (file) |  |
336 KB | Mitja (talk | contribs) | 1 | |
| 13:21, 25 March 2018 | Pegboard pocket.png (file) |  |
338 KB | Mitja (talk | contribs) | Pocket toolpath for Project:Pegboard in Fusion 360 | 1 |
| 13:14, 24 March 2018 | Pegboard mounted.jpg (file) |  |
1.75 MB | Mitja (talk | contribs) | Pegboard mounted inside a locker door | 1 |
| 13:10, 24 March 2018 | Pegboard drilling holes.jpg (file) |  |
1.61 MB | Mitja (talk | contribs) | Drilling holes for Project:Pegboard | 1 |
| 00:35, 22 March 2018 | Compressor oil level.JPG (file) |  |
383 KB | Lukas (talk | contribs) | oil level indicator on the Einhell Air Tech Euro 2200-1 compressor - the reading should always be between the top edge and the red dot | 1 |
| 00:33, 22 March 2018 | Hose drum.JPG (file) |  |
404 KB | Lukas (talk | contribs) | hose drum to connect pneumatics equipment | 1 |
| 00:31, 22 March 2018 | Tire filler.JPG (file) |  |
412 KB | Lukas (talk | contribs) | tire filler to use with pressurized air from a compressor | 1 |
| 00:24, 22 March 2018 | Blow gun.JPG (file) |  |
443 KB | Lukas (talk | contribs) | simple blow gun to use with pressurized air from a compressor | 1 |
| 00:17, 22 March 2018 | Compressor outlets.JPG (file) |  |
399 KB | Lukas (talk | contribs) | the two outlets of our compressor: full pressure (up to 8 bar) on the right, decreased pressure (controlled by the black knob) on the left | 1 |
| 23:52, 21 March 2018 | Installation 2D Drucker 8150DN.png (file) |  |
5.33 MB | Johannes (talk | contribs) | 1 | |
| 12:22, 21 March 2018 | Magnetic Knife Holder Done landscape.jpg (file) |  |
2.57 MB | Lukas (talk | contribs) | "Landscape" oriented crop of File:Magnetic Knife Holder Done.jpg, showing a magnetic knife holder. Original author: Patrick - edited with GIMP to fit into our [[Project:Wiki Slideshow|slideshow on the mai... | 1 |
| 12:22, 21 March 2018 | TBB done 4to3.jpg (file) |  |
1.46 MB | Lukas (talk | contribs) | 4:3 aspect ratio crop of File:TBB done.jpg, showing a bicycle bell made from an old typewriter. Edited with GIMP to fit into our slideshow on the main page. | 1 |
| 12:21, 21 March 2018 | Roubo workbench 1-17 4to3.JPG (file) |  |
910 KB | Lukas (talk | contribs) | 4:3 aspect ratio crop of File:Roubo workbench 1-17.JPG, showing the nearly finished "Roubo" style woodworking bench. Edited with GIMP to fit into our slideshow on the main page. | 1 |
| 09:17, 20 March 2018 | Satzungsziele.pdf (file) |  |
109 KB | Lukas (talk | contribs) | excerpt from the CoMakingSpace gGmbH's founding documents containing our charitable goals and the obligation to only use company money to help achieve these goals | 1 |
| 20:56, 19 March 2018 | First woodturning attempts.JPG (file) |  |
371 KB | Lukas (talk | contribs) | Taking our wood lathe for a first spin! You can tell from the appearance of the cuts that the tools were not exactly ''sharp'' at the time... | 1 |
| 20:39, 19 March 2018 | Printer-farm.jpg (file) |  |
381 KB | Lukas (talk | contribs) | 3D printers now with more space! | 2 |
| 20:34, 19 March 2018 | Common room.JPG (file) |  |
364 KB | Lukas (talk | contribs) | our common room as seen from the CNC room | 1 |
| 20:29, 19 March 2018 | CNC room.JPG (file) |  |
201 KB | Lukas (talk | contribs) | as much of the CNC room as I could fit on one photo (mostly the CNC router) | 1 |
| 17:21, 8 March 2018 | Instagram logo 2016.svg (file) |  |
4 KB | Lukas (talk | contribs) | Instagram logo - source & licensing: https://commons.wikimedia.org/wiki/File:Instagram_logo_2016.svg | 1 |
| 20:16, 21 February 2018 | Recycle-icon.png (file) |  |
136 KB | Lukas (talk | contribs) | "reduce - reuse - recyle" icon == Licensing == This file is licensed under the [https://en.wikipedia.org/wiki/en:Creative_Commons Creative Commons] [https://creativecommons.org/licenses/by-sa/4.0/deed.en Attribution-Share Alike 4.0 International] lice... | 1 |
| 08:37, 18 February 2018 | Lukas' bench v0.JPG (file) |  |
375 KB | Lukas (talk | contribs) | a simple CoMaking bench that is primarily used for repairs and storage | 1 |
| 19:02, 16 February 2018 | 11 lockers.JPG (file) |  |
385 KB | Lukas (talk | contribs) | the two first locker units we built, including a bookshelf and 11 lockers for our members | 1 |
| 19:31, 15 February 2018 | Crappy mallet 3.JPG (file) |  |
272 KB | Lukas (talk | contribs) | third step to making a (very) simple wooden mallet: use a rasp to clean up the handle | 1 |
| 19:27, 15 February 2018 | Crappy mallet 2.JPG (file) |  |
421 KB | Lukas (talk | contribs) | second step to making a (very) simple wooden mallet: chisel the handle to a round and comfortable shape | 1 |
| 19:21, 15 February 2018 | Crappy mallet 1.JPG (file) |  |
447 KB | Lukas (talk | contribs) | first step to making a (very) simple wooden mallet: cut the future handle to an octagonal shape, e.g. with a japanese saw | 1 |
