File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 17:11, 11 April 2025 | RasterPlan cold metal area.jpg (file) |  |
3.09 MB | Lukas (talk | contribs) | RasterPlan pegboard in the Cold Metal Area | 1 |
| 17:10, 11 April 2025 | RasterPlan hot metal area.jpg (file) |  |
3.94 MB | Lukas (talk | contribs) | orientation | 2 |
| 01:35, 10 April 2025 | RasterPlan.JPG (file) |  |
1.86 MB | Lukas (talk | contribs) | Closeup of RasterPlan pegboard | 1 |
| 01:34, 10 April 2025 | Skadis.JPG (file) |  |
3.85 MB | Lukas (talk | contribs) | Closeup of Skadis pegboard | 1 |
| 12:33, 8 April 2025 | PHILIPS GC 8280.jpeg (file) |  |
1.96 MB | Lukas (talk | contribs) | cropped & rotated | 2 |
| 23:04, 5 April 2025 | Cup hinge jig.jpg (file) |  |
45 KB | Luzian (talk | contribs) | 1 | |
| 19:03, 1 April 2025 | Trashtracker-homeassistant-sensor-view.png (file) |  |
95 KB | Erik (talk | contribs) | 1 | |
| 19:01, 1 April 2025 | Trashtracker-homeassistant-list-sensors.png (file) |  |
209 KB | Erik (talk | contribs) | 1 | |
| 18:54, 1 April 2025 | Trashtracker-template-homeassistant-expression.png (file) |  |
109 KB | Erik (talk | contribs) | 1 | |
| 18:52, 1 April 2025 | Trashtracker-template-binary-sensor.png (file) |  |
136 KB | Erik (talk | contribs) | 1 | |
| 18:36, 1 April 2025 | Trashtracker-home-assistant-state-change-view.png (file) |  |
104 KB | Erik (talk | contribs) | 1 | |
| 18:33, 1 April 2025 | Trash-tracker-homeassistant-overview.png (file) |  |
28 KB | Erik (talk | contribs) | 1 | |
| 18:25, 1 April 2025 | ESPresense-Webinterface.png (file) |  |
174 KB | Erik (talk | contribs) | 1 | |
| 10:52, 31 March 2025 | Thread Snips and Cover.jpeg (file) |  |
5.21 MB | Finno (talk | contribs) | 1 | |
| 21:18, 30 March 2025 | Canon i-sensys MF752Cdw.jpg (file) |  |
6.29 MB | NitramLegov (talk | contribs) | 1 | |
| 17:11, 30 March 2025 | Sewing area.jpg (file) |  |
3.89 MB | Luzian (talk | contribs) | 1 | |
| 12:22, 30 March 2025 | E-bench-skadis.jpg (file) |  |
4.02 MB | Erik (talk | contribs) | 1 | |
| 09:46, 28 March 2025 | Sewing Area.png (file) |  |
2.74 MB | NitramLegov (talk | contribs) | 1 | |
| 23:31, 26 March 2025 | Bosch PMD10.jpg (file) |  |
5.17 MB | NitramLegov (talk | contribs) | 1 | |
| 17:29, 24 March 2025 | Schneidmatte.jpg (file) |  |
894 KB | Luzian (talk | contribs) | 1 | |
| 20:02, 23 March 2025 | Plastic-trash-with-tracker.jpeg (file) |  |
311 KB | Erik (talk | contribs) | Photo of our plastic trash with the tracker attached on the left. Surrounded by black tape. | 1 |
| 14:32, 10 March 2025 | Remove foil before engraving.jpg (file) |  |
66 KB | MobiTobi (talk | contribs) | 1 | |
| 14:27, 10 March 2025 | Engraving test.jpg (file) |  |
487 KB | MobiTobi (talk | contribs) | 1 | |
| 13:38, 10 March 2025 | Ds300 beltdiscsander.jpg (file) |  |
78 KB | Freegroup (talk | contribs) | 1 | |
| 19:08, 28 February 2025 | FeuerwehrEmblem.svg (file) |  |
28 KB | B--rian (talk | contribs) | Based on the vectorized version of https://www.feuerwehrverband.de/service/feuerwehr-signet/ Heavily modified to allow for laser-cutting. | 1 |
| 21:55, 27 February 2025 | Sliding table, fence pulled back.png (file) |  |
2.17 MB | Lukas (talk | contribs) | sliding table saw: you may use the sliding table AND the parallel fence if the fence is pulled back before the blade. | 1 |
| 18:18, 27 February 2025 | Sliding table plus fence - wrong.png (file) |  |
1.91 MB | Lukas (talk | contribs) | sliding table saw: DO NOT constrain a workpiece with the sliding table AND the parallel fence during the cut! | 1 |
| 21:59, 26 February 2025 | NewBornStencil.svg (file) |  |
13 KB | B--rian (talk | contribs) | Inspired by https://www.walmart.com/ip/Couple-Baby-Heart-Family-NewBorn-Love-Heart-Stencil-Template-Reusable-8-5-x-11-for-Painting-on-Walls-Wood-Etc-By-Stencilville/282470688 | 1 |
| 01:00, 22 February 2025 | Car bed.jpg (file) |  |
1.53 MB | Marisa (talk | contribs) | Image I took after waking up in my car in a French parking lot. | 1 |
| 16:03, 20 February 2025 | LaserCutJigsaw WhatWentWrong.jpg (file) |  |
231 KB | B--rian (talk | contribs) | Two common failures when laser cutting jigsaw-puzzles: If you don't put anything underneath the workpiece, puzzle pieces may just slip through the knife bed into the collection tray. The result are pieces which are being incorrectly (purple ellipses) cut since they are tilted, or only cut partially (purple rectangle). | 1 |
| 13:30, 20 February 2025 | Jigsaw Failure 01.jpeg (file) |  |
175 KB | B--rian (talk | contribs) | The first (failed) experiment to use laser engraving and laser cutting to create a plywood jigsaw puzzle. | 1 |
| 22:26, 19 February 2025 | B--rian HeidelbergCastle Jigsaw.svg (file) |  |
180 KB | B--rian (talk | contribs) | This file is based on https://upload.wikimedia.org/wikipedia/commons/2/24/Heidelberg_-_Heidelberger_Schloss.JPG | 1 |
| 12:22, 19 February 2025 | Felder RL 160.jpg (file) |  |
818 KB | Johannes (talk | contribs) | 1 | |
| 13:58, 11 February 2025 | DF-500.jpeg (file) |  |
531 KB | Baumphil (talk | contribs) | Domino DF500 | 1 |
| 13:46, 11 February 2025 | Domino Df500.png (file) |  |
1.3 MB | Baumphil (talk | contribs) | 1 | |
| 22:16, 8 February 2025 | JohannesStProfilePic.jpg (file) |  |
42 KB | Hypernode (talk | contribs) | 1 | |
| 20:04, 5 February 2025 | Epson printer comakingspace.jpg (file) |  |
4.09 MB | Finno (talk | contribs) | 1 | |
| 14:18, 1 February 2025 | Qrcode Altendorf F 45 .png (file) |  |
870 bytes | Baumphil (talk | contribs) | 1 | |
| 13:34, 29 January 2025 | HPL fragment.jpg (file) |  |
454 KB | Lukas (talk | contribs) | Corner broken off a sheet of HPL, revealing the internal layers as well as a clean cut edge | 1 |
| 13:31, 24 January 2025 | Photo 2024-09-09 16-39-27 Kopie.jpg (file) |  |
142 KB | Freegroup (talk | contribs) | 1 | |
| 23:28, 16 January 2025 | Table Saw Jig 3.jpg (file) |  |
2.26 MB | Baumphil (talk | contribs) | 1 | |
| 23:27, 16 January 2025 | Table Saw Jig 2.jpg (file) |  |
2.42 MB | Baumphil (talk | contribs) | 1 | |
| 23:26, 16 January 2025 | Table Saw Jig 1.jpg (file) |  |
2.51 MB | Baumphil (talk | contribs) | 1 | |
| 23:17, 16 January 2025 | Tabls saw jig.jpg (file) |  |
2.55 MB | Baumphil (talk | contribs) | 1 | |
| 12:38, 31 December 2024 | Jewelry organizer.jpg (file) |  |
7.88 MB | Tom (talk | contribs) | 1 | |
| 16:05, 30 December 2024 | Tool insert.jpg (file) |  |
6.17 MB | NitramLegov (talk | contribs) | Image rotated by 270 degrees clockwise | 2 |
| 16:05, 30 December 2024 | Sliding door.jpg (file) |  |
6.91 MB | NitramLegov (talk | contribs) | Image rotated by 270 degrees clockwise | 2 |
| 16:01, 30 December 2024 | Floorlamp.jpg (file) |  |
5.73 MB | NitramLegov (talk | contribs) | Image rotated by 180 degrees clockwise | 3 |
| 19:12, 29 December 2024 | Toolholder.png (file) |  |
178 KB | Tom (talk | contribs) | 1 | |
| 18:48, 29 December 2024 | MFT file.png (file) |  |
189 KB | Tom (talk | contribs) | 1 |
