Category:Facilities
A category for the various rooms/sections making up the CoMakingSpace.
How to Find Us
Siemensstraße 40
69123 Heidelberg
Our entrance: ///stunning.gearing.between
Public Transportation
You can reach us by train, by tram and by bus:
- By Tram: Take Tram 5 to Heidelberg Ochsenkopf. From there, walk below the tram lines and cross Henkel-Terosonstraße in order to enter Hans-Bunte Straße. Take a right at Siemensstraße and get to number 40. Take a right and enter the area.
- By Train: Take S3 to Heidelberg Pfaffengrund/Wieblingen. On the bridge, walk towards Pfaffengrund. Take a right at Hans-Bunte Straße and a left at Siemensstraße. Get to number 40 and take a right to enter the area.
- By Bus: Take Bus 34 to Hans-Bunte Straße. Enter Hans-Bunte Straße and walk towards Siemensstraße. Take a left at Siemensstraße and get to number 40. Take a right and enter the area.
You can identify our part of the hall by the "CoMakingSpace" signs!
Parking
There's not a lot of space for your car right in front of our hall. However, there is usually plenty of space on Hans-Bunte-Straße around the corner. As indicated above, you can also get to us by public transportation!
Workshops
For the educational sessions also known as "workshops", see seminars!
A workshop is a room equipped for a range of practical project work - we have three of those, depending on your material and/or the kind of side effects your activity has:
noise & dust: wood workshop noise & sparks: metal workshop smell/fumes: 3D printing & electronics room If you just need space to work on something that does not require personal protection and would not disturb someone sitting nearby, you can probably do it in the common room!
Details
Below you'll find a list of the rooms and areas we have at the CoMakingSpace:
- 10 Million Dollar Sticks
- 3D Printing Area
- Abrasive Discs
- Airbrush Area
- Altendorf F 45
- BAMATO AB-550
- Backsaws
- Bandsaw Blades
- Bandsaw Direction Jig
- Bandsaw Fence
- Bandsaw Sled
- Bench Hook
- Bevel Edge Chisels
- Bevel Gauges
- Bicycle Tools
- Bike Repair Stand
- Bolt Cutter
- Bosch GCM 12 GDL
- Bosch GEX 40-150
- Bosch PFZ 700 PE
- Bosch PSS 250 AE
- Bosch PST 750 PE "EXPO2000"
- Bottle Cutter
- Braces
- Braces
- Breadboards
- Burnisher
- CMI C-S-BS 250
- CNC Area
- CW4000
- Calipers
- Calipers
- Card Scrapers
- Cargo Bike
- Carving Chisels
- Caulking Guns
- Centerline Gauge
- Circlip Pliers
- Clamp Cart
- Clamps
- CoMS Storage
- Cold Metal Area
- Common Room
- Compasses
- Corner Clamping Jigs
Pages in category "Facilities"
The following 44 pages are in this category, out of 44 total.