File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 02:48, 30 April 2020 | Carpenter's mallet - Lukas2.JPG (file) |  |
239 KB | Lukas (talk | contribs) | Project:Mallets nearly completed carpenter's mallet from self-dried timber | 1 |
| 02:06, 30 April 2020 | Carpenter's mallet - Lukas.JPG (file) |  |
177 KB | Lukas (talk | contribs) | Project:Mallets carpenter's mallet made from self-dried timber (before finishing) | 1 |
| 01:57, 30 April 2020 | Applying finish.JPG (file) |  |
365 KB | Lukas (talk | contribs) | finishing a wooden mallet handle | 1 |
| 01:17, 30 April 2020 | Curved cherry.JPG (file) |  |
313 KB | Lukas (talk | contribs) | Project:Drying Timber curved cherry log pretty soon after cutting the young bent tree | 1 |
| 01:13, 30 April 2020 | Old cherry.JPG (file) |  |
339 KB | Lukas (talk | contribs) | Project:Drying Timber freshly cleaned up and split cherry branch from an old tree | 1 |
| 00:46, 30 April 2020 | Drying freshly cut lumber.JPG (file) |  |
245 KB | Lukas (talk | contribs) | Project:Drying Timber a small log of cherry hand-cut into (more or less straight) boards for drying | 1 |
| 00:29, 30 April 2020 | Japanese skiving knife demo.JPG (file) |  |
339 KB | Lukas (talk | contribs) | how to hold a Japanese skiving knife to cut leather | 1 |
| 00:22, 30 April 2020 | 10 Million Dollar Stick demo.JPG (file) |  |
458 KB | Lukas (talk | contribs) | how to use a 10 Million Dollar Stick to hold small stock on the chop saw | 1 |
| 22:49, 29 April 2020 | Router jig with jigsaw.JPG (file) |  |
673 KB | Lukas (talk | contribs) | Project:Schallschutztüren some router jigs can also be used with a jigsaw, but at least the corners won't turn out nearly as nice | 1 |
| 22:46, 29 April 2020 | Jigsaw idea - custom-fit shelf.JPG (file) |  |
278 KB | Lukas (talk | contribs) | another use for jigsaws: cutting a corner out of a custom-fit shelf | 1 |
| 20:23, 29 April 2020 | Small fire.JPG (file) |  |
301 KB | Lukas (talk | contribs) | fire is hot! | 1 |
| 20:21, 29 April 2020 | Paste wax 2x.JPG (file) |  |
396 KB | Lukas (talk | contribs) | two jars of self-mixed paste wax | 1 |
| 20:10, 29 April 2020 | Sewing awl.JPG (file) |  |
346 KB | Lukas (talk | contribs) | a sewing awl being used to stitch two pieces of leather together | 1 |
| 19:55, 29 April 2020 | Shrink fit example.JPG (file) |  |
490 KB | Lukas (talk | contribs) | shrink-fitting: after this scooter part was heated in a drying oven and the bearings were cooled down with freeze spray, the parts slid together easily and were solidly connected once everything was back at the same temperature | 1 |
| 00:49, 23 April 2020 | Japanese leather knife.JPG (file) |  |
458 KB | Lukas (talk | contribs) | a Japanese leather knife | 1 |
| 00:05, 23 April 2020 | Daubers.JPG (file) |  |
524 KB | Lukas (talk | contribs) | two wool daubers for dye applications in leatherworking | 1 |
| 23:52, 22 April 2020 | Leather burnishers.JPG (file) |  |
483 KB | Lukas (talk | contribs) | two leather burnishers | 1 |
| 23:03, 22 April 2020 | Skivers.JPG (file) |  |
500 KB | Lukas (talk | contribs) | two skivers used for leatherworking | 1 |
| 16:00, 16 April 2020 | Businesscard Map.svg (file) |  |
163 KB | Luzian (talk | contribs) | changed Walking path layer hierarchy over buildings | 2 |
| 21:48, 15 April 2020 | Auger bit shaft - square.png (file) |  |
56 KB | Lukas (talk | contribs) | illustration of a square, tapered auger bit shaft screenshot; quickly modeled in Tinkercad | 1 |
| 19:32, 13 April 2020 | LaserCut53 entry.jpg (file) |  |
195 KB | NitramLegov (talk | contribs) | 1 | |
| 18:11, 9 April 2020 | 10 Million Dollar Stick.jpg (file) |  |
936 KB | Lukas (talk | contribs) | 10 Million Dollar Stick, freshly cut | 1 |
| 23:26, 8 April 2020 | Skibogen-Schuss.gif (file) |  |
772 KB | Lukas (talk | contribs) | Project:Skibogen ''wirklich'' in Aktion GIF animiert aus File:Skibogen-Schuss.jpg und einem anderen Foto mit GIMP; verkleinert mit [https://ezgif.com/resize/ ezgif.com] | 1 |
| 22:51, 8 April 2020 | Skibogen-Schuss.jpg (file) |  |
650 KB | Lukas (talk | contribs) | Project:Skibogen in Aktion | 1 |
| 17:19, 7 April 2020 | Slack logo.png (file) |  |
17 KB | Keno (talk | contribs) | The official Slack logo, used to identify, in accordance with the official Slack media kit. See https://slack.com/intl/de-de/media-kit | 1 |
| 15:28, 20 March 2020 | Bosch-GCM-12-GDL sliding-lock.jpg (file) |  |
219 KB | Pakue (talk | contribs) | Chop Saw Bosch-GCM-12-GDL sliding lock | 1 |
| 15:27, 20 March 2020 | Bosch-GCM-12-GDL laser.jpg (file) |  |
199 KB | Pakue (talk | contribs) | Chop Saw Bosch-GCM-12-GDL laser switch | 1 |
| 15:25, 20 March 2020 | Bosch-GCM-12-GDL front-parts.jpeg (file) |  |
469 KB | Pakue (talk | contribs) | [Chop saw] Bosch-GCM-12-GDL front controls | 1 |
| 15:24, 20 March 2020 | Bosch-GCM-12-GDL depth-stop.jpg (file) |  |
271 KB | Pakue (talk | contribs) | [Chop saw] Bosch-GCM-12-GDL depth stop | 1 |
| 22:36, 18 March 2020 | Nudelholz.jpeg (file) |  |
2.29 MB | Pakue (talk | contribs) | Ein gedrechseltes Nudelholz. Im Besitz von {{P}}; gemacht durch User:Lukas. | 1 |
| 16:07, 15 March 2020 | Spline jig.jpg (file) |  |
227 KB | Lukas (talk | contribs) | spline jig for our table saw built & photographed by {{P}} | 1 |
| 19:50, 12 March 2020 | Trash location.jpg (file) |  |
55 KB | Lukas (talk | contribs) | the way from our backdoor to the trash can pickup/storage spot map © OpenStreetMap contributors (brutally edited with Windows screen capture) | 1 |
| 21:54, 9 March 2020 | Cujoontour.jpg (file) |  |
935 KB | Cujoontour (talk | contribs) | 1 | |
| 17:30, 8 March 2020 | Waste bins outside.jpg (file) |  |
1.08 MB | Lukas (talk | contribs) | new location (Siemensstraße) instead of Czernyring | 2 |
| 09:39, 28 February 2020 | Festival radio battery check.jpg (file) |  |
417 KB | Lukas (talk | contribs) | Project:Festival Radio nice view of most components as the battery voltage is checked after charging | 1 |
| 01:31, 26 February 2020 | Film faced plywood.jpg (file) |  |
587 KB | Lukas (talk | contribs) | view onto a sheet of film faced plywood with two small holes drilled from the other side (note the tearout!) and a larger hole cut with a hole saw | 1 |
| 01:07, 26 February 2020 | Wire mesh plywood - closeup.JPG (file) |  |
496 KB | Lukas (talk | contribs) | the structured side of wire mesh plywood along with some sawn or routed cross-sections | 1 |
| 01:00, 26 February 2020 | Drahtkaninchen.JPG (file) |  |
554 KB | Lukas (talk | contribs) | Kaninchendraht. | 1 |
| 00:54, 26 February 2020 | Routing a recess.JPG (file) |  |
690 KB | Lukas (talk | contribs) | a recess for a door lock is cut into wire mesh plywood with a router | 1 |
| 00:43, 26 February 2020 | Weathered film-faced plywood.JPG (file) |  |
365 KB | Lukas (talk | contribs) | film-faced plywood does age under outdoor conditions, but stays stable for a relatively long time | 1 |
| 00:06, 26 February 2020 | Rectangle router jig.JPG (file) |  |
530 KB | Lukas (talk | contribs) | our rectangle router jig after it has just been used to cut a precise hole for a 3D printed part | 1 |
| 19:11, 25 February 2020 | Chisel bits.jpg (file) |  |
227 KB | Lukas (talk | contribs) | some SDS chisel bits in their package (cropped from File:SDS bits.JPG) | 1 |
| 02:03, 24 February 2020 | MV.JPG (file) |  |
1.54 MB | NitramLegov (talk | contribs) | 1 | |
| 01:55, 24 February 2020 | Vertical Farm - Building Done.jpeg (file) |  |
1.2 MB | NitramLegov (talk | contribs) | 1 | |
| 01:55, 24 February 2020 | Vertical Farm - Building Step 1.JPG (file) |  |
5.56 MB | NitramLegov (talk | contribs) | 1 | |
| 01:54, 24 February 2020 | Vertical Farm - Planting step 0.jpg (file) |  |
187 KB | NitramLegov (talk | contribs) | 1 | |
| 01:51, 24 February 2020 | Vertical Farm - Routing.JPG (file) |  |
4.76 MB | NitramLegov (talk | contribs) | 1 | |
| 01:46, 24 February 2020 | Vertical Farm - planting step 3.JPG (file) |  |
6.69 MB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - planting step 2.JPG (file) |  |
5.39 MB | NitramLegov (talk | contribs) | 1 | |
| 01:45, 24 February 2020 | Vertical Farm - Planting step 1.JPG (file) |  |
5.51 MB | NitramLegov (talk | contribs) | 1 |
