File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 00:03, 5 March 2019 | TAC 08.JPG (file) |  |
443 KB | Lukas (talk | contribs) | Project:TAC since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw... | 1 |
| 00:00, 5 March 2019 | TAC 00.JPG (file) |  |
379 KB | Lukas (talk | contribs) | Project:TAC finished 6-player game in use :-) | 1 |
| 23:46, 4 March 2019 | TAC 07.JPG (file) |  |
445 KB | Lukas (talk | contribs) | Project:TAC the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router | 1 |
| 23:43, 4 March 2019 | TAC 06.JPG (file) |  |
441 KB | Lukas (talk | contribs) | Project:TAC back to pictures of the 4-player game: undecorated version completely routed | 1 |
| 23:41, 4 March 2019 | TAC 05-2.JPG (file) |  |
423 KB | Lukas (talk | contribs) | Project:TAC we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time) | 1 |
| 23:38, 4 March 2019 | TAC 05-1.JPG (file) |  |
344 KB | Lukas (talk | contribs) | Project:TAC partially routed 6-player board on the WorkBee | 1 |
| 23:35, 4 March 2019 | TAC 04.JPG (file) |  |
321 KB | Lukas (talk | contribs) | Project:TAC on to the full game - design in Fusion 360 | 1 |
| 23:34, 4 March 2019 | TAC 03.JPG (file) |  |
623 KB | Lukas (talk | contribs) | Project:TAC (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change! | 1 |
| 23:31, 4 March 2019 | TAC 02.JPG (file) |  |
371 KB | Lukas (talk | contribs) | Project:TAC design of a practive piece with all the needed shapes in Fusion 360 | 1 |
| 23:30, 4 March 2019 | TAC 01.JPG (file) |  |
563 KB | Lukas (talk | contribs) | Project:TAC preparing to cut a practice piece from one of our stock boards | 1 |
| 16:53, 3 March 2019 | Scrolled Westeros.JPG (file) |  |
375 KB | Lukas (talk | contribs) | the "Game of Thrones" continent of Westeros cut out on the scroll saw - keep in mind that large shapes like this require spiral-toothed blades! | 1 |
| 16:39, 3 March 2019 | Sawblade cleaning 5.JPG (file) |  |
297 KB | Lukas (talk | contribs) | how to clean circular saw blades, step 5: done! now try whether the blade cuts well again, otherwise please report it :-) | 1 |
| 16:38, 3 March 2019 | Sawblade cleaning 4.JPG (file) |  |
380 KB | Lukas (talk | contribs) | how to clean circular saw blades, step 4: clean the tooth faces with something narrow but stable, e.g. a thin strip of scrap wood | 1 |
| 16:36, 3 March 2019 | Sawblade cleaning 3.JPG (file) |  |
440 KB | Lukas (talk | contribs) | how to clean circular saw blades, step 3: scrub off the gunk with the rough side of a sponge | 1 |
| 16:35, 3 March 2019 | Sawblade cleaning 2.JPG (file) |  |
538 KB | Lukas (talk | contribs) | how to clean circular saw blades, step 2: let the blade soak in the water/cleaner solution for a while | 1 |
| 16:32, 3 March 2019 | Sawblade cleaning 1.JPG (file) |  |
444 KB | Lukas (talk | contribs) | how to clean circular saw blades, step 1: prepare an appropriate-sized container with (hot) water and cleaning agent | 1 |
| 00:21, 3 March 2019 | Birch tealights 12.JPG (file) |  |
376 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights further drying - important: insert the steel cups early so the logs shrink around them, not too far! | 1 |
| 00:19, 3 March 2019 | Birch tealights 11.JPG (file) |  |
774 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights after shaping, the ends were finished with coconut oil | 1 |
| 00:16, 3 March 2019 | Birch tealights 10.JPG (file) |  |
405 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights more drilling...so good to have a drill press available! | 1 |
| 00:08, 3 March 2019 | Birch tealights 09.JPG (file) |  |
372 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights after the logs finally seemed dry enough to stop supporting mold, holes could be drilled with a large Forstner bit | 1 |
| 10:55, 24 February 2019 | Birch tealights 08.JPG (file) |  |
291 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights there was still a bit of new mold after all the efforts, but it was easily sanded off by hand on a clamped-down piece of sandpaper | 1 |
| 10:53, 24 February 2019 | Birch tealights 07.JPG (file) |  |
5.62 MB | Lukas (talk | contribs) | Project:Tree Trunk Tealights another week of drying on my CoMaking bench, this time more evenly spaced... | 1 |
| 10:49, 24 February 2019 | Birch tealights 06.JPG (file) |  |
365 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights applying some leftover hard wax oil to cover the cut faces against new mold formation | 1 |
| 10:46, 24 February 2019 | Birch tealights 05.JPG (file) |  |
408 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights we proceeded with sanding off the mold and applying some leftover hard wax oil to cover the cut faces against new mold formation | 1 |
| 10:44, 24 February 2019 | Birch tealights 04.JPG (file) |  |
406 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights after the cut pieces were left sitting on my CoMaking bench for a week, a lot of mold had formed again -.- | 1 |
| 10:41, 24 February 2019 | Birch tealights 03.JPG (file) |  |
432 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights where the logs were too thick for the rather small chop saw, manual labor with a crosscut saw was necessary | 1 |
| 10:39, 24 February 2019 | Birch tealights 02.JPG (file) |  |
406 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights I used the chop saw to cut the logs into approx. 8-10 cm long pieces | 1 |
| 10:35, 24 February 2019 | Birch tealights 01.JPG (file) |  |
350 KB | Lukas (talk | contribs) | Project:Tree Trunk Tealights the store-bought birch logs were a lot wetter than expected and started to grow mold within a few weeks... | 1 |
| 21:30, 18 February 2019 | Glass Cutter.jpg (file) |  |
90 KB | Johannes (talk | contribs) | 1 | |
| 23:18, 17 February 2019 | Dewalt ladevorgang.png (file) |  |
100 KB | Johannes (talk | contribs) | 2 | |
| 19:16, 17 February 2019 | 32" E-Ink Display Dead Area display1.png (file) |  |
29 KB | Johannes (talk | contribs) | 1 | |
| 17:58, 17 February 2019 | 32" E-Ink Display connection.png (file) |  |
16 KB | Johannes (talk | contribs) | 2 | |
| 17:36, 17 February 2019 | 32" E-Ink Display Back.jpeg (file) |  |
108 KB | Johannes (talk | contribs) | 1 | |
| 16:32, 17 February 2019 | 32" E-ink Display FrontDoor.jpg (file) |  |
62 KB | Johannes (talk | contribs) | 1 | |
| 00:00, 17 February 2019 | ScrollSaw.gif (file) |  |
10.91 MB | NitramLegov (talk | contribs) | 1 | |
| 17:14, 15 February 2019 | Project gallery.png (file) |  |
254 KB | Lukas (talk | contribs) | {{NavGal}} of our documented Projects as of 2019-2-11 | 1 |
| 13:06, 15 February 2019 | Hidir profil.jpg (file) |  |
24 KB | Ali (talk | contribs) | 1 | |
| 02:10, 7 February 2019 | Airlag cube2.jpg (file) |  |
101 KB | Airlag (talk | contribs) | 1 | |
| 02:07, 7 February 2019 | Airlag cube1.png (file) |  |
689 KB | Airlag (talk | contribs) | 1 | |
| 01:59, 7 February 2019 | Airlag wands.jpg (file) |  |
4.15 MB | Airlag (talk | contribs) | 1 | |
| 01:52, 7 February 2019 | Airlag beg.jpg (file) |  |
18 KB | Airlag (talk | contribs) | 1 | |
| 01:48, 7 February 2019 | Airlag kira.jpg (file) |  |
25 KB | Airlag (talk | contribs) | 1 | |
| 01:46, 7 February 2019 | Airlag head.jpg (file) |  |
12 KB | Airlag (talk | contribs) | 1 | |
| 01:41, 7 February 2019 | Airlag ball of wool.jpg (file) |  |
1.13 MB | Airlag (talk | contribs) | 1 | |
| 01:30, 7 February 2019 | Airlag buttons.jpg (file) |  |
1.16 MB | Airlag (talk | contribs) | 1 | |
| 01:15, 7 February 2019 | Airlag.jpg (file) |  |
197 KB | Airlag (talk | contribs) | portrait | 1 |
| 19:58, 3 February 2019 | PCB gold black.jpg (file) |  |
4.2 MB | Luzian (talk | contribs) | PCB Form an non documented project from pakue | 1 |
| 02:25, 3 February 2019 | Lumberjack cake stand 15.JPG (file) |  |
586 KB | Lukas (talk | contribs) | "Lumberjack Championship" inspired wedding cake stand used as a plant display after another wedding | 1 |
| 02:18, 3 February 2019 | Lumberjack cake stand 14.JPG (file) |  |
312 KB | Lukas (talk | contribs) | one of the boards for my "Lumberjack Championship" inspired wedding cake stand after sanding and application of coconut oil | 1 |
| 02:15, 3 February 2019 | Lumberjack cake stand 13.JPG (file) |  |
365 KB | Lukas (talk | contribs) | drilling screw holes into the wedges of my "Lumberjack Championship" inspired wedding cake stand - just to be safe, ''might'' also have been stable without them | 1 |
