All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 20:21, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 14.JPG (scribing the ideal screw line of a butt joint for resized wardrobe drawers with a marking gauge)
- 20:20, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 13.JPG (sanding the bottom piece for a resized wardrobe drawer)
- 20:18, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 12.JPG (all "wall" pieces for two resized wardrobe drawers cut, routed & drilled)
- 20:16, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 11.JPG (marking the correct hole locations to assemble a resized wardrobe drawer with dowel centers)
- 20:13, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 10.jpg (drilling holes for dowel pegs into the side piece of a resized wardrobe drawer - a bit of masking tape is a great quick & dirty depth stop!)
- 20:11, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 09.JPG (all parts for two resized wardrobe drawers marked according to their place in the final assembly (1/2, left/right))
- 20:09, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 08.JPG (first "dry" fit of a resized wardrobe drawer after cutting & routing)
- 20:06, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 07.JPG (all grooves for the bottom of resized wardrobe drawers (cut on the router table)
- 20:05, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 06.JPG (test piece on the new router table to make sure the groove will turn out right for my resized wardrobe drawers)
- 20:03, 12 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 05.JPG (parts for resized wardrobe drawers fresh off the table saw)
- 19:19, 9 November 2018 Lukas talk contribs moved page Project:Wax Cloth to Project:Beeswax Wrap without leaving a redirect ("wax cloth" may be more appropriate for clothing/backpacks :-P)
- 20:20, 7 November 2018 Lukas talk contribs moved page Bench Grinder to Bench Grinders
- 21:14, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (further exxageration of tip)
- 20:27, 6 November 2018 Lukas talk contribs uploaded a new version of File:Wood screw - sunk full tapping.svg (double line thickness (2 px))
- 20:04, 6 November 2018 Lukas talk contribs uploaded File:Wood screw - sunk full tapping.svg (Drawing of a wood screw with a sunk head, full thread and a self-tapping tip (some other combinations hidden in the file's layers). Geometry most certainly not accurate, just to illustrate features in tables or...)
- 23:47, 5 November 2018 Lukas talk contribs uploaded File:Makita screwdriver bit set.JPG (a basic woodworking set of screwdriver bits)
- 23:46, 5 November 2018 Lukas talk contribs uploaded File:Screwdriver bit organizers.JPG (a couple of screwdriver bits in various organizers)
- 00:50, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 04.JPG (plans for resized wardrobe drawers taking shape on a common room table)
- 00:48, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 03.JPG (one of the old drawers taken apart to take measurements for resized wardrobe drawers)
- 00:45, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 02.JPG (old drawers taken out to allow measurements for a custom resized wardrobe drawer)
- 00:41, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 01.JPG (look at all that wasted space before a custom resized wardrobe drawer was installed...)
- 00:26, 5 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 00.jpg ("before-and-after" comparison of a custom resized wardrobe drawer and the original small one (front))
- 17:08, 4 November 2018 Lukas talk contribs uploaded File:Drill press depth flexibility.JPG (the depth stop on a drill press is sometimes made of a flexible material, reducing its precision - while this can often be ignored, it is important to remember for fine work)
- 17:02, 4 November 2018 Lukas talk contribs uploaded File:Projector mount.JPG (ceiling mount for our projector, inspired by [https://makezine.com/projects/build-six-axis-positioning-platform-stuff-can-buy-hardware-store/ a Makezine project]])
- 16:58, 4 November 2018 Lukas talk contribs uploaded File:Spatulas.JPG (spatulas on the wood workshop wall)
- 16:50, 4 November 2018 Lukas talk contribs uploaded File:Timber on bandsaw.JPG (large bandsaws can easily cut through quite large pieces, such as this part of a log)
- 16:43, 4 November 2018 Lukas talk contribs uploaded File:Holzdübel.JPG (selection of dowel pegs in our wood workshop)
- 11:03, 4 November 2018 Lukas talk contribs uploaded File:Flip dot clock.JPG (our flip dot display acting as a clock)
- 11:00, 4 November 2018 Lukas talk contribs uploaded a new version of File:Cheap woodturning tools.JPG (better lighting; tools in their holder)
- 13:49, 2 November 2018 Lukas talk contribs uploaded a new version of File:Bandsaw guide position - side view.png (explanation integrated into picture)
- 13:35, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw guide position - side view.png (positioning of bandsaw blade guides: * |ab| = 0.5 to 1 mm * |cd| > |ab| annotated with Inkscape)
- 12:49, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw teeth position on flat wheels.JPG (Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca...)
- 12:39, 2 November 2018 Lukas talk contribs uploaded File:Wiki media creation.JPG (two members creating media for our page on jigsaws)
- 23:55, 31 October 2018 Lukas talk contribs uploaded File:Leimbinder.JPG (a beam of glued laminated timber in a hardware store)
- 17:35, 31 October 2018 Lukas talk contribs uploaded a new version of File:VHS couch table legs finished.JPG (4:3 aspect ratio for Main Page/Slideshow)
- 18:34, 27 October 2018 Lukas talk contribs uploaded a new version of File:Router table feed direction animation.GIF (low resolution - should allow animated thumbnails)
- 22:42, 25 October 2018 Lukas talk contribs uploaded File:Router table feed direction - fence.gif (low-resolution GIF animation of the proper feed direction for '''push cuts''' along the router table fence)
- 22:11, 25 October 2018 Lukas talk contribs uploaded File:Push block use.JPG ((fake) use of push blocks - press down firmly with both hands, but perhaps insert a bit for better routing results ;-))
- 22:03, 25 October 2018 Lukas talk contribs uploaded File:Making push blocks.JPG (gluing handles into a pair of push blocks, utilizing the offcuts to obtain an even clamping surface)
- 21:50, 25 October 2018 Lukas talk contribs uploaded File:Push blocks.JPG (two self-made push blocks to use with dangerous tools such as a router table, jointer or table saw)
- 22:02, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-4.JPG (finished digital file shredder - clearly a desktop accessory that every Maker needs!)
- 22:00, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-3.JPG (main case & inner works of the digital file shredder completed; power supply and baseplate still missing)
- 21:58, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-2.JPG (most of the components for the digital file shredder are embedded into a 3D printed case after pausing the print at the appropriate time)
- 21:53, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-1.JPG (rough assembly of the electronics for a small "file shredder" that formats SD cards!)
- 21:48, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-0.JPG (a small "file shredder" that formats SD cards!)
- 21:27, 23 October 2018 Lukas talk contribs deleted page Plenum/Meeting minutes/2018-11 02 (unused redirect; content was: "#REDIRECT Plenum/Meeting minutes/2018-11-02", and the only contributor was "NitramLegov" (talk))
- 20:20, 23 October 2018 Lukas talk contribs uploaded File:Screenshot - Inkscape.PNG (screenshot of a typical Inkscape project (in this case: drawing wiki illustrations of woodturning tools))
- 17:34, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction.png (Basic schematic of the proper feed direction on a router table, resulting in safe climb cuts whichever side of the bit you are working on. Drawn in Inkscape, also see animated version: [[:File:Router table feed direction animation...)
- 17:24, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction animation.GIF (10 fps animation of the proper feed direction on a router table - only push cuts should be made! drawn in Inkscape, animated with GIMP)
- 17:44, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table off center.JPG (When we got the Westfalia router table, the router was mounted too far to the front so the bit would be off center - not that the scale on this simple table would have been too accurate anyway, but something we will fix nevertheless!)