File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 17:26, 2 May 2019 | Abused woodturning tools.JPG (file) |  |
380 KB | Lukas (talk | contribs) | woodturning tools that were abused and bent :-( | 1 |
| 17:15, 2 May 2019 | Panel carrying.JPG (file) |  |
433 KB | Lukas (talk | contribs) | using panel carriers to move a large workpiece out of the CoMaking room | 1 |
| 17:08, 2 May 2019 | Panel carriers.JPG (file) |  |
301 KB | Lukas (talk | contribs) | two panel carriers on a table | 1 |
| 16:57, 2 May 2019 | Fretsaws.JPG (file) |  |
463 KB | Lukas (talk | contribs) | two fretsaws (one without a blade) on the wall | 1 |
| 17:09, 24 April 2019 | Speakers.jpg (file) |  |
223 KB | Luzian (talk | contribs) | 2*5W 4ohm 52mm speaker and 10W 4ohm 3" sub woofer | 1 |
| 17:00, 24 April 2019 | Audio amp.jpg (file) |  |
304 KB | Luzian (talk | contribs) | 1 | |
| 16:03, 24 April 2019 | Photo 2019-04-24 16-02-00.jpg (file) |  |
61 KB | Luzian (talk | contribs) | 1 | |
| 15:41, 24 April 2019 | BlenderLiveRender.png (file) |  |
1.88 MB | Luzian (talk | contribs) | 1 | |
| 15:25, 24 April 2019 | Laptopstand V3 vs V2.png (file) |  |
700 KB | Luzian (talk | contribs) | v2 & v3 next to each other | 1 |
| 14:56, 24 April 2019 | Laptopstand V2.png (file) |  |
184 KB | Luzian (talk | contribs) | 1 | |
| 22:05, 19 April 2019 | Swinging puffin.jpg (file) |  |
2.04 MB | Ignaz (talk | contribs) | Picture of finished swinging puffin. | 1 |
| 21:56, 19 April 2019 | Mask for swinging bird puffin.pdf (file) |  |
220 KB | Ignaz (talk | contribs) | Cutting mask for a swinging puffin made of wood | 1 |
| 22:17, 18 April 2019 | CNCjs connection.jpg (file) |  |
49 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Management Buttons.jpg (file) |  |
17 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Job Preview.jpg (file) |  |
213 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Console.jpg (file) |  |
133 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Camera Widget.jpg (file) |  |
42 KB | NitramLegov (talk | contribs) | 1 | |
| 22:15, 18 April 2019 | CNCjs Axes widget.jpg (file) |  |
60 KB | NitramLegov (talk | contribs) | 1 | |
| 19:03, 17 April 2019 | Turning tool.jpg (file) |  |
5.7 MB | Luzian (talk | contribs) | Old insert next to tool | 1 |
| 15:38, 17 April 2019 | Slic3r.png (file) |  |
554 KB | Luzian (talk | contribs) | Slic3ring a 3DBenchy | 1 |
| 15:07, 17 April 2019 | Laptop stand v1.png (file) |  |
898 KB | Luzian (talk | contribs) | 1 | |
| 15:01, 17 April 2019 | Waxwrap5.JPG (file) |  |
509 KB | Lukas (talk | contribs) | Project:Beeswax Wrap the finished beeswax wrap can be cleaned with soapy water (not too hot!) | 1 |
| 14:57, 17 April 2019 | Waxwrap4.JPG (file) |  |
564 KB | Lukas (talk | contribs) | Project:Beeswax Wrap The warmth of your hands should now be sufficient to shape your beeswax wrap around pretty much anything! If it doesn't keep its shape, add more wax. | 1 |
| 14:54, 17 April 2019 | Waxwrap3.JPG (file) |  |
349 KB | Lukas (talk | contribs) | Project:Beeswax Wrap place the beeswax-covered fabric between to sheets of baking paper and use a flatiron to melt the wax into it | 1 |
| 14:42, 17 April 2019 | Surface Powerbank.jpg (file) |  |
7.25 MB | Luzian (talk | contribs) | Picture of the finished Powerbank | 1 |
| 14:33, 17 April 2019 | BMS-wirering .png (file) |  |
75 KB | Luzian (talk | contribs) | 1 | |
| 14:31, 17 April 2019 | Waxwrap2.JPG (file) |  |
440 KB | Lukas (talk | contribs) | Project:Beeswax Wrap spread the beeswax flakes onto a piece of cotton fabric | 1 |
| 14:28, 17 April 2019 | Waxwrap1.JPG (file) |  |
405 KB | Lukas (talk | contribs) | Project:Beeswax Wrap first of all, the beeswax needed to be shredded into workable pieces | 1 |
| 16:00, 16 April 2019 | BMS 3s.jpg (file) |  |
3.54 MB | Luzian (talk | contribs) | Battery management system | 1 |
| 20:42, 14 April 2019 | CNC Router Power Supply.png (file) |  |
10 KB | NitramLegov (talk | contribs) | 1 | |
| 20:38, 14 April 2019 | CNC Router Wiring.jpg (file) |  |
3.29 MB | NitramLegov (talk | contribs) | 1 | |
| 12:43, 8 April 2019 | Outdoortable 6.jpg (file) |  |
177 KB | Manu (talk | contribs) | 1 | |
| 12:36, 8 April 2019 | Photo5285199923836464141.jpg (file) |  |
137 KB | Manu (talk | contribs) | 1 | |
| 15:03, 1 April 2019 | Jar jar shelf 7.JPG (file) |  |
371 KB | NitramLegov (talk | contribs) | 3 | |
| 15:28, 23 March 2019 | Outdoortable 2.jpg (file) |  |
117 KB | Manu (talk | contribs) | 2 | |
| 15:27, 23 March 2019 | Outdoortable 1.jpg (file) |  |
104 KB | Manu (talk | contribs) | 2 | |
| 15:20, 23 March 2019 | Outdoortable 4.jpg (file) |  |
186 KB | Manu (talk | contribs) | 1 | |
| 15:20, 23 March 2019 | Outdoortable 3.jpg (file) |  |
189 KB | Manu (talk | contribs) | 1 | |
| 21:22, 22 March 2019 | Kuechentheke aris 201903 2.jpg (file) |  |
176 KB | Manu (talk | contribs) | The almost finished kitchen counter with User:Aris testing its stability. | 1 |
| 22:54, 16 March 2019 | Gregor No02.jpg (file) |  |
410 KB | Gregor (talk | contribs) | 2 | |
| 01:15, 14 March 2019 | Schwenkgrill Vorbild.JPG (file) |  |
540 KB | Lukas (talk | contribs) | Project:Schwenkgrill Opas selbstgebauter Schwenkgrill, den ich in einigen Punkten kopieren möchte! | 1 |
| 00:22, 9 March 2019 | Toy wheel turning 6.JPG (file) |  |
436 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 6: drill a perfectly centered hole using a drill chuck on the wood lathe! | 1 |
| 00:19, 9 March 2019 | Toy wheel turning 5.JPG (file) |  |
427 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 5: sand off the central roughness, e.g. with a clamped-down belt sander (we did not have a disc sander yet) | 1 |
| 00:17, 9 March 2019 | Toy wheel turning 4.JPG (file) |  |
389 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 4: finish the parting cut off the lathe, using a Japanese saw for example | 1 |
| 00:13, 9 March 2019 | Toy wheel turning 3.JPG (file) |  |
457 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 3: repeat parting until there are enough recognizable wheels | 1 |
| 00:11, 9 March 2019 | Toy wheel turning 2.JPG (file) |  |
410 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 2: use a parting tool to define the wheels | 1 |
| 00:09, 9 March 2019 | Toy wheel turning 1.JPG (file) |  |
354 KB | Lukas (talk | contribs) | turning wheels for a toy (Project:Tigerente) step 1 (after your blank becomes round): mark what to keep/where to part | 1 |
| 19:07, 7 March 2019 | Center finder on log.JPG (file) |  |
366 KB | Lukas (talk | contribs) | using a 3D printed "center finder" to estimate the center of a not exactly round apple log | 1 |
| 18:55, 7 March 2019 | Squaring up 2.JPG (file) |  |
432 KB | Lukas (talk | contribs) | squaring up a woodturning blank, step 2: cut your stock using the previously set parallel fence - not too difficult ;-) | 1 |
| 18:48, 7 March 2019 | Squaring up 1.JPG (file) |  |
390 KB | Lukas (talk | contribs) | squaring up a woodturning blank, step 1: use the narrower width of your stock to set the table saw's parallel fence | 1 |
