All public logs
From CoMakingSpace Wiki
Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 00:13, 5 March 2019 Lukas talk contribs uploaded File:TAC 11.JPG (Project:TAC 4-player board ready to leave the workshop with only minor steps left)
- 00:11, 5 March 2019 Lukas talk contribs uploaded File:TAC 10.JPG (Project:TAC after the outline was finished, the edges of the 4-player board were prettified with a roundover router bit)
- 00:06, 5 March 2019 Lukas talk contribs uploaded File:TAC 09.JPG (Project:TAC ...and trimmed to the partial-depth outline with a flush-cut router bit)
- 00:03, 5 March 2019 Lukas talk contribs uploaded File:TAC 08.JPG (Project:TAC since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw...)
- 00:00, 5 March 2019 Lukas talk contribs uploaded File:TAC 00.JPG (Project:TAC finished 6-player game in use :-))
- 23:46, 4 March 2019 Lukas talk contribs uploaded File:TAC 07.JPG (Project:TAC the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router)
- 23:43, 4 March 2019 Lukas talk contribs uploaded File:TAC 06.JPG (Project:TAC back to pictures of the 4-player game: undecorated version completely routed)
- 23:41, 4 March 2019 Lukas talk contribs uploaded File:TAC 05-2.JPG (Project:TAC we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time))
- 23:38, 4 March 2019 Lukas talk contribs uploaded File:TAC 05-1.JPG (Project:TAC partially routed 6-player board on the WorkBee)
- 23:35, 4 March 2019 Lukas talk contribs uploaded File:TAC 04.JPG (Project:TAC on to the full game - design in Fusion 360)
- 23:34, 4 March 2019 Lukas talk contribs uploaded File:TAC 03.JPG (Project:TAC (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!)
- 23:31, 4 March 2019 Lukas talk contribs uploaded File:TAC 02.JPG (Project:TAC design of a practive piece with all the needed shapes in Fusion 360)
- 23:30, 4 March 2019 Lukas talk contribs uploaded File:TAC 01.JPG (Project:TAC preparing to cut a practice piece from one of our stock boards)
- 23:47, 3 March 2019 Lukas talk contribs uploaded File:SKIL 7210.jpg ("SKIL 7210" sheet sander with some sanding marks on an old tabletop)
- 23:46, 3 March 2019 Lukas talk contribs uploaded File:Bosch PSS 250 AE.jpg ("Bosch PSS 250 AE" sheet sander with some sanding marks on an old tabletop)
- 16:53, 3 March 2019 Lukas talk contribs uploaded File:Scrolled Westeros.JPG (the "Game of Thrones" continent of Westeros cut out on the scroll saw - keep in mind that large shapes like this require spiral-toothed blades!)
- 16:39, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 5.JPG (how to clean circular saw blades, step 5: done! now try whether the blade cuts well again, otherwise please report it :-))
- 16:38, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 4.JPG (how to clean circular saw blades, step 4: clean the tooth faces with something narrow but stable, e.g. a thin strip of scrap wood)
- 16:36, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 3.JPG (how to clean circular saw blades, step 3: scrub off the gunk with the rough side of a sponge)
- 16:35, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 2.JPG (how to clean circular saw blades, step 2: let the blade soak in the water/cleaner solution for a while)
- 16:32, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 1.JPG (how to clean circular saw blades, step 1: prepare an appropriate-sized container with (hot) water and cleaning agent)
- 00:21, 3 March 2019 Lukas talk contribs uploaded File:Birch tealights 12.JPG (Project:Tree Trunk Tealights further drying - important: insert the steel cups early so the logs shrink around them, not too far!)
- 00:19, 3 March 2019 Lukas talk contribs uploaded File:Birch tealights 11.JPG (Project:Tree Trunk Tealights after shaping, the ends were finished with coconut oil)
- 00:16, 3 March 2019 Lukas talk contribs uploaded File:Birch tealights 10.JPG (Project:Tree Trunk Tealights more drilling...so good to have a drill press available!)
- 00:08, 3 March 2019 Lukas talk contribs uploaded File:Birch tealights 09.JPG (Project:Tree Trunk Tealights after the logs finally seemed dry enough to stop supporting mold, holes could be drilled with a large Forstner bit)
- 12:45, 2 March 2019 User account MikeTym talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 19:35, 27 February 2019 User account Flop talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 18:53, 25 February 2019 User account Freewill talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 10:55, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 08.JPG (Project:Tree Trunk Tealights there was still a bit of new mold after all the efforts, but it was easily sanded off by hand on a clamped-down piece of sandpaper)
- 10:53, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 07.JPG (Project:Tree Trunk Tealights another week of drying on my CoMaking bench, this time more evenly spaced...)
- 10:49, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 06.JPG (Project:Tree Trunk Tealights applying some leftover hard wax oil to cover the cut faces against new mold formation)
- 10:46, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 05.JPG (Project:Tree Trunk Tealights we proceeded with sanding off the mold and applying some leftover hard wax oil to cover the cut faces against new mold formation)
- 10:44, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 04.JPG (Project:Tree Trunk Tealights after the cut pieces were left sitting on my CoMaking bench for a week, a lot of mold had formed again -.-)
- 10:41, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 03.JPG (Project:Tree Trunk Tealights where the logs were too thick for the rather small chop saw, manual labor with a crosscut saw was necessary)
- 10:39, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 02.JPG (Project:Tree Trunk Tealights I used the chop saw to cut the logs into approx. 8-10 cm long pieces)
- 10:35, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 01.JPG (Project:Tree Trunk Tealights the store-bought birch logs were a lot wetter than expected and started to grow mold within a few weeks...)
- 21:47, 20 February 2019 User account Korbi talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
- 21:30, 18 February 2019 Johannes talk contribs uploaded File:Glass Cutter.jpg
- 23:18, 17 February 2019 Johannes talk contribs uploaded a new version of File:Dewalt ladevorgang.png
- 23:12, 17 February 2019 Johannes talk contribs uploaded File:Dewalt ladevorgang.png
- 19:16, 17 February 2019 Johannes talk contribs uploaded File:32" E-Ink Display Dead Area display1.png
- 18:24, 17 February 2019 NitramLegov talk contribs moved page PlaformIO Seminar to PlatformIO Seminar (Typo....)
- 17:58, 17 February 2019 Johannes talk contribs uploaded a new version of File:32" E-Ink Display connection.png
- 17:36, 17 February 2019 Johannes talk contribs uploaded File:32" E-Ink Display Back.jpeg
- 17:18, 17 February 2019 Johannes talk contribs uploaded File:32" E-Ink Display connection.png
- 16:32, 17 February 2019 Johannes talk contribs uploaded File:32" E-ink Display FrontDoor.jpg
- 00:00, 17 February 2019 NitramLegov talk contribs uploaded File:ScrollSaw.gif
- 17:14, 15 February 2019 Lukas talk contribs uploaded File:Project gallery.png ({{NavGal}} of our documented Projects as of 2019-2-11)
- 13:06, 15 February 2019 Ali talk contribs uploaded File:Hidir profil.jpg
- 14:44, 7 February 2019 User account Ali talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)