Main public logs

Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 23:26, 4 November 2018 Lukas talk contribs uploaded File:Resized wardrobe drawers 00.jpg ("before-and-after" comparison of a custom resized wardrobe drawer and the original small one (front))
• 16:08, 4 November 2018 Lukas talk contribs uploaded File:Drill press depth flexibility.JPG (the depth stop on a drill press is sometimes made of a flexible material, reducing its precision - while this can often be ignored, it is important to remember for fine work)
• 16:02, 4 November 2018 Lukas talk contribs uploaded File:Projector mount.JPG (ceiling mount for our projector, inspired by [https://makezine.com/projects/build-six-axis-positioning-platform-stuff-can-buy-hardware-store/ a Makezine project]])
• 15:58, 4 November 2018 Lukas talk contribs uploaded File:Spatulas.JPG (spatulas on the wood workshop wall)
• 15:50, 4 November 2018 Lukas talk contribs uploaded File:Timber on bandsaw.JPG (large bandsaws can easily cut through quite large pieces, such as this part of a log)
• 15:43, 4 November 2018 Lukas talk contribs uploaded File:Holzdübel.JPG (selection of dowel pegs in our wood workshop)
• 10:03, 4 November 2018 Lukas talk contribs uploaded File:Flip dot clock.JPG (our flip dot display acting as a clock)
• 10:00, 4 November 2018 Lukas talk contribs uploaded a new version of File:Cheap woodturning tools.JPG (better lighting; tools in their holder)
• 12:49, 2 November 2018 Lukas talk contribs uploaded a new version of File:Bandsaw guide position - side view.png (explanation integrated into picture)
• 12:35, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw guide position - side view.png (positioning of bandsaw blade guides: * |ab| = 0.5 to 1 mm * |cd| > |ab| annotated with Inkscape)
• 11:49, 2 November 2018 Lukas talk contribs uploaded File:Bandsaw teeth position on flat wheels.JPG (Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca...)
• 11:39, 2 November 2018 Lukas talk contribs uploaded File:Wiki media creation.JPG (two members creating media for our page on jigsaws)
• 22:55, 31 October 2018 Lukas talk contribs uploaded File:Leimbinder.JPG (a beam of glued laminated timber in a hardware store)
• 16:35, 31 October 2018 Lukas talk contribs uploaded a new version of File:VHS couch table legs finished.JPG (4:3 aspect ratio for Main Page/Slideshow)
• 17:34, 27 October 2018 Lukas talk contribs uploaded a new version of File:Router table feed direction animation.GIF (low resolution - should allow animated thumbnails)
• 21:42, 25 October 2018 Lukas talk contribs uploaded File:Router table feed direction - fence.gif (low-resolution GIF animation of the proper feed direction for '''push cuts''' along the router table fence)
• 21:11, 25 October 2018 Lukas talk contribs uploaded File:Push block use.JPG ((fake) use of push blocks - press down firmly with both hands, but perhaps insert a bit for better routing results ;-))
• 21:03, 25 October 2018 Lukas talk contribs uploaded File:Making push blocks.JPG (gluing handles into a pair of push blocks, utilizing the offcuts to obtain an even clamping surface)
• 20:50, 25 October 2018 Lukas talk contribs uploaded File:Push blocks.JPG (two self-made push blocks to use with dangerous tools such as a router table, jointer or table saw)
• 21:02, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-4.JPG (finished digital file shredder - clearly a desktop accessory that every Maker needs!)
• 21:00, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-3.JPG (main case & inner works of the digital file shredder completed; power supply and baseplate still missing)
• 20:58, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-2.JPG (most of the components for the digital file shredder are embedded into a 3D printed case after pausing the print at the appropriate time)
• 20:53, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-1.JPG (rough assembly of the electronics for a small "file shredder" that formats SD cards!)
• 20:48, 23 October 2018 Lukas talk contribs uploaded File:Digital file shredder-0.JPG (a small "file shredder" that formats SD cards!)
• 20:27, 23 October 2018 Lukas talk contribs deleted page Plenum/Meeting minutes/2018-11 02 (unused redirect; content was: "#REDIRECT Plenum/Meeting minutes/2018-11-02", and the only contributor was "NitramLegov" (talk))
• 19:20, 23 October 2018 Lukas talk contribs uploaded File:Screenshot - Inkscape.PNG (screenshot of a typical Inkscape project (in this case: drawing wiki illustrations of woodturning tools))
• 16:34, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction.png (Basic schematic of the proper feed direction on a router table, resulting in safe climb cuts whichever side of the bit you are working on. Drawn in Inkscape, also see animated version: [[:File:Router table feed direction animation...)
• 16:24, 23 October 2018 Lukas talk contribs uploaded File:Router table feed direction animation.GIF (10 fps animation of the proper feed direction on a router table - only push cuts should be made! drawn in Inkscape, animated with GIMP)
• 16:44, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table off center.JPG (When we got the Westfalia router table, the router was mounted too far to the front so the bit would be off center - not that the scale on this simple table would have been too accurate anyway, but something we will fix nevertheless!)
• 16:41, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table fence-top.JPG (In addition to the fence, you should use additional guides on the router table whenever you can - shown here is a rigid top guide ''almost'' touching the workpiece, featherboards can actually press on it and are even safer!)
• 16:37, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table fence-X.JPG (The screw knob marked "X" should be left alone unless you really need it - it lets you move the left part of the fence back and forward on its own; for the majority of jobs on the router table (if not all) you want the fence to be perf...)
• 16:31, 22 October 2018 Lukas talk contribs uploaded File:Westfalia router table dust ports.JPG (there are two places where you can connect a shop vac to the Westfalia router table: top (green) - most useful for edge work - or bottom (black) - most useful for grooves)
• 17:00, 18 October 2018 Lukas talk contribs moved page Handbohrmaschinen Einweisung to Handbohrmaschinen-Einweisung without leaving a redirect
• 16:42, 18 October 2018 Lukas talk contribs deleted page 3D Druckern (unnötiger redirect, content was: "#REDIRECTPrusa i3 MK2S", and the only contributor was "Lmnl99" (talk))
• 22:48, 17 October 2018 User account Blacksheep talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
• 15:39, 13 October 2018 Lukas talk contribs uploaded File:Bosch EXPO2000.JPG (a Bosch EXPO2000 jigsaw in its case)
• 14:52, 13 October 2018 Lukas talk contribs deleted page Druckerhandbuch (Broken redirect: content was: "#REDIRECT[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf printers' manual]", and the only contributor was "Lmnl99" (talk))
• 16:21, 8 October 2018 Lukas talk contribs moved page Caulking Gun to Caulking Guns
• 16:10, 8 October 2018 Lukas talk contribs moved page Area Patron to Area Patrons
• 20:45, 30 September 2018 Lukas talk contribs uploaded File:File handles 12.JPG (a self-made file handle next to an "original" one)
• 20:44, 30 September 2018 Lukas talk contribs uploaded File:File handles 11.png (do NOT use a hammer to drive the file into a (self-made) file handle - the hardened steel could break - but instead push it in as far as you can and then hit the workbench surface with the handle's end a few times photo edited...)
• 20:29, 30 September 2018 Lukas talk contribs uploaded File:File handles 10.JPG (for drilling the hole in a self-made file handle, a stepped approach may be best but a first attempt with a drill bit about half the diameter of the thickest file shaft part was also successful)
• 20:26, 30 September 2018 Lukas talk contribs uploaded File:File handles 09.JPG (taking a self-made file handle off the wood lathe: you could do ''some'' of the work with a parting tool, but using a sharp saw with the lathe turned off is the safest way)
• 20:23, 30 September 2018 Lukas talk contribs uploaded File:File handles 08.JPG (Sanding on the wood lathe is awesome! Here, a self-made file handle gets its final touch)
• 20:20, 30 September 2018 Lukas talk contribs uploaded File:File handles 07.JPG (now it really looks like a self-made file handle: a groove has been formed with a skew chisel where it will feel comfortable)
• 19:42, 30 September 2018 Lukas talk contribs uploaded File:File handles 06.JPG (the blank for a self-made file handle is taking shape after some further smoothing with a skew chisel)
• 19:35, 30 September 2018 Lukas talk contribs uploaded File:File handles 05.JPG (a self-made file handle in progress: after roughing out a cylinder, a parting tool is used to get the proper diameter for a ferrule)
• 19:33, 30 September 2018 Lukas talk contribs uploaded File:File handles 04.JPG (turning blank for a self-made file handle set up between centers on the wood lathe)
• 18:16, 30 September 2018 Lukas talk contribs uploaded File:File handles 03.JPG (cutting a turning blank for a self-made file handle with a Japanese saw)
• 18:13, 30 September 2018 Lukas talk contribs uploaded File:File handles 02.JPG (measuring the ferrule for a self-made file handle with digital calipers - here you can truly appreciate that they always take an identical measurement for inside and outside with their two pairs of probes!)