File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 18:15, 2 January 2018 | Roubo workbench 1-03.JPG (file) |  |
398 KB | Lukas (talk | contribs) | simple jig for drilling horizontal holes into the planks that are going to make up the top of our {{Roubo-1}} | 1 |
| 18:12, 2 January 2018 | Roubo workbench 1-02.JPG (file) |  |
368 KB | Lukas (talk | contribs) | planks for our {{Roubo-1}}'s top laid out in their optimal arrangement for the first rough planing | 1 |
| 18:06, 2 January 2018 | Roubo workbench 1-01.JPG (file) |  |
286 KB | Lukas (talk | contribs) | Materials for our {{Roubo-1}}: ten 2000{{x}}80{{x}}60 mm and two 2000{{x}}100{{x}}80 mm spruce planks. | 1 |
| 10:24, 31 December 2017 | Very early woodshop.JPG (file) |  |
260 KB | Lukas (talk | contribs) | our wood workshop was used for all kinds of work (and storage) before we could build better options - so it never looked very tidy... | 1 |
| 10:20, 31 December 2017 | Kitchen installation.JPG (file) |  |
300 KB | Lukas (talk | contribs) | our kitchen, ready for the final installation steps | 1 |
| 10:17, 31 December 2017 | Removing old sink.JPG (file) |  |
367 KB | Lukas (talk | contribs) | a while after we removed an old sink, a bit of water still thought it would be funny to come splashing out of the wall... | 1 |
| 10:12, 31 December 2017 | Ceiling work.JPG (file) |  |
302 KB | Lukas (talk | contribs) | sometimes we need to get onto a ladder, e.g. to mount our projector or some extra outlets | 1 |
| 10:04, 31 December 2017 | E.Room after painting.JPG (file) |  |
323 KB | Lukas (talk | contribs) | freshly painted electronics room | 1 |
| 17:09, 29 December 2017 | Wall mounting panels.jpg (file) |  |
222 KB | Lukas (talk | contribs) | early on, we installed some large plywood or scrap wood panels on our walls for convenient mounting options (here in the CoMaking room) | 1 |
| 17:00, 29 December 2017 | Large sheet cutting.JPG (file) |  |
384 KB | Lukas (talk | contribs) | Ed and Lukas preparing a large plywood sheet for the construction of our very first lockers | 1 |
| 10:39, 29 December 2017 | First tools 2.JPG (file) |  |
399 KB | Lukas (talk | contribs) | another carload of tools is being moved into our new Space in September 2017 | 1 |
| 10:38, 29 December 2017 | First tools 1.JPG (file) |  |
360 KB | Lukas (talk | contribs) | the first carload of tools, just arrived on moving day in September 2017 | 1 |
| 10:12, 28 December 2017 | Dremel 4000 with bits.JPG (file) |  |
322 KB | Lukas (talk | contribs) | "Dremel 4000" rotary tool and a box of rotary tool bits | 1 |
| 18:00, 27 December 2017 | Drilling table.JPG (file) |  |
404 KB | Lukas (talk | contribs) | drilling table in our wood workshop as of 2017-12-21 | 1 |
| 16:53, 27 December 2017 | Güde Drechselbank uninstalled.JPG (file) |  |
426 KB | Lukas (talk | contribs) | "Güde 1000" wood lathe just after arrival | 1 |
| 12:46, 26 December 2017 | Elu BM 11 E.jpg (file) |  |
105 KB | Lukas (talk | contribs) | "Elu BM 11 E" corded drill | 1 |
| 10:19, 26 December 2017 | Drills on the wall.JPG (file) |  |
395 KB | Lukas (talk | contribs) | An impact drill (top left), a rotary hammer (bottom left) and two "normal" electric drills (right) on the wall by our drilling table. | 1 |
| 03:24, 13 December 2017 | Key files.jpg (file) |  |
297 KB | Lukas (talk | contribs) | six key files on a [https://www.thingiverse.com/thing:801756 3D printed rack] | 1 |
| 02:40, 13 December 2017 | Lathe restoration.JPG (file) |  |
340 KB | Lukas (talk | contribs) | our newly arrived Myford ML7 metalworking lathe on the repair table in late 2017 | 1 |
| 20:02, 11 December 2017 | Pins,pins,pins.JPG (file) |  |
633 KB | Lukas (talk | contribs) | picture of a CPU (I think...) | 1 |
| 18:09, 11 December 2017 | Drill repair.JPG (file) |  |
394 KB | Lukas (talk | contribs) | Patrick fixing a broken hammer drill with a wiring diagram from the internet | 1 |
| 19:15, 10 December 2017 | Einhell router.JPG (file) |  |
378 KB | Lukas (talk | contribs) | a router made by Einhell (not sure about the model no.) | 1 |
| 20:24, 8 December 2017 | Cutting corners.JPG (file) |  |
497 KB | Lukas (talk | contribs) | table saw with freshly cut corner clamping jigs | 1 |
| 20:09, 8 December 2017 | Herkules KSZ 2100.JPG (file) |  |
369 KB | Lukas (talk | contribs) | small entry level chop saw | 1 |
| 19:44, 8 December 2017 | Herkules BHK 1600LE.JPG (file) |  |
623 KB | Lukas (talk | contribs) | entry level circular saw | 1 |
| 19:33, 8 December 2017 | Crosscut saw in action.JPG (file) |  |
413 KB | Lukas (talk | contribs) | using a crosscut saw to build a shelf for the office | 1 |
| 17:36, 28 November 2017 | Vise family.jpg (file) |  |
743 KB | Lukas (talk | contribs) | a couple of bench vises and a woodworking vise before they found their home on various workbenches (tweeted by @comakingspace on 2017-11-05 - [https://twitter.com/comakingspace/status/927154888777388032 link]) | 1 |
| 00:36, 15 November 2017 | Ryoba.JPG (file) |  |
476 KB | Lukas (talk | contribs) | a Japanese "Ryoba" saw | 1 |
| 23:55, 14 November 2017 | Clamping corners.JPG (file) |  |
464 KB | Lukas (talk | contribs) | two corner clamping jigs in use during a locker build | 1 |
| 23:41, 14 November 2017 | Simple corner clamping jigs.JPG (file) |  |
386 KB | Lukas (talk | contribs) | simple corner clamping jigs made by cutting square boards in half and drilling two holes into each piece with a 35 mm Forstner bit | 1 |
| 23:31, 14 November 2017 | Jointer plane.jpg (file) |  |
871 KB | Lukas (talk | contribs) | a jointer plane being used to flatten a Roubo workbench | 1 |
| 23:22, 14 November 2017 | Holdfast and Ryoba.JPG (file) |  |
383 KB | Lukas (talk | contribs) | Sawing a piece of plywood with a Ryoba - a holdfast makes sure nothing moves! | 1 |
| 23:18, 14 November 2017 | Spade drill bits.JPG (file) |  |
299 KB | Lukas (talk | contribs) | a couple of spade bits | 1 |
| 22:43, 14 November 2017 | Hand tools and shavings.jpg (file) |  |
326 KB | Lukas (talk | contribs) | some hand tools on top of a Roubo workbench along with a bunch of plane shavings | 1 |
| 09:49, 13 November 2017 | UniCoFil rainbow.JPG (file) |  |
212 KB | Lukas (talk | contribs) | a spool of "rainbow" PLA filament from UniCoFil | 1 |
| 18:43, 11 November 2017 | Wood workshop.JPG (file) |  |
497 KB | Lukas (talk | contribs) | Our wood workshop in its early days - storage projects are just starting and our first Roubo workbench is still in progress. | 1 |
| 18:27, 11 November 2017 | Forstner-shavings.JPG (file) |  |
373 KB | Lukas (talk | contribs) | Forstner bits are not designed to transport wood shavings very well, so you may want to clean the hole now and then... | 1 |
| 13:30, 31 October 2017 | Surform plane.JPG (file) |  |
477 KB | Lukas (talk | contribs) | Using a surform plane on a locker door made from plywood. The left hand would of course guide the front of the tool when not busy with a camera ;-) | 1 |
| 13:21, 31 October 2017 | Step drill bit vs pipe.JPG (file) |  |
249 KB | Lukas (talk | contribs) | Drilling a hole for a blind rivet into aluminum and steel pipes for our coat rack, using a step drill bit | 1 |
| 16:08, 5 October 2017 | Roubo detailed.PNG (file) |  |
497 KB | Lukas (talk | contribs) | Relatively detailed sketch of a "Roubo workbench" created in SketchUp. Imported (and modified) models: "Anant Record 53 Vise Simplified (2)" by SchreiberBike and "Holdfast" by Chris, big thanks to the artists! | 1 |
| 10:57, 4 October 2017 | Roubo sketch.PNG (file) |  |
43 KB | Lukas (talk | contribs) | early SketchUp draft of a basic "Roubo workbench" | 1 |
| 08:24, 28 September 2017 | Horizontal drill jig.jpeg (file) |  |
513 KB | Lukas (talk | contribs) | Some jigs can be hacked together in a few minutes, such as this fixture for horizontal drilling that consists of scrap wood and some clamps. | 1 |
| 11:56, 20 September 2017 | Vertical approach.PNG (file) |  |
38 KB | Lukas (talk | contribs) | Sketch for lockers with one shared vertical frame per six locker unit (doors omitted for simplicity) - designed in SketchUp. | 1 |
| 11:44, 20 September 2017 | Horizontal approach.PNG (file) |  |
30 KB | Lukas (talk | contribs) | Sketch for lockers which are made up of two horizontal boxes per six locker unit (doors omitted for simplicity) Designed in SketchUp. | 1 |
| 17:05, 19 September 2017 | Sketching lockers.PNG (file) |  |
69 KB | Lukas (talk | contribs) | drafting the first locker prototype in SketchUp | 1 |
| 15:34, 11 September 2017 | Wired 'battery' pack.JPG (file) |  |
324 KB | Lukas (talk | contribs) | Bosch PSR 960 compatible power supply adapter based on an old NiCd battery pack (see Project:Semi-Cordless Drill for details) | 1 |
| 23:43, 8 September 2017 | Patrick.jpg (file) |  |
310 KB | Pakue (talk | contribs) | Patrick | 1 |
| 22:08, 7 September 2017 | Icon comakingspace.png (file) |  |
1 KB | Pakue (talk | contribs) | 128x128 image of the CoMakingSpace-Co | 1 |
| 20:19, 7 September 2017 | Ciaran Printer.jpg (file) |  |
981 KB | Ciaran (talk | contribs) | Ciaran with Prusa Printer | 1 |
| 20:13, 7 September 2017 | Ciaran Sketch.jpg (file) |  |
5 KB | Ciaran (talk | contribs) | Photo for Ciaran user page | 1 |
