Chop Saw: Difference between revisions
m (→Cutting angles: typo) |
(moved Herkules specific content down) |
||
| Line 41: | Line 41: | ||
For the hand tool capable of making only horizontally angled cuts, see [[Miter Saw|miter saw]]. | For the hand tool capable of making only horizontally angled cuts, see [[Miter Saw|miter saw]]. | ||
== Safety == | == Safety == | ||
| Line 83: | Line 81: | ||
== Potential Upgrades == | == Potential Upgrades == | ||
* It's possible to create a "shadow line" indicating your cut location by carefully positioning an LED right above the blade. <sup>[http://www.instructables.com/id/How-To-Miter-Saw-Shadow-Line/]</sup> | * It's possible to create a "shadow line" indicating your cut location by carefully positioning an LED right above the blade. <sup>[http://www.instructables.com/id/How-To-Miter-Saw-Shadow-Line/]</sup> | ||
* we should get (or make!) a [https://www.youtube.com/watch?v=jJIkx8L_ogk "10 Million Dollar Stick"] to use instead of the built-in clamp for small pieces | |||
== Herkules KSZ 2100 == | == Herkules KSZ 2100 == | ||
| Line 93: | Line 89: | ||
|machine name=Herkules KSZ 2100 | |machine name=Herkules KSZ 2100 | ||
|image=Herkules KSZ 2100.JPG | |image=Herkules KSZ 2100.JPG | ||
|status='''broken''' | |status='''broken''' | ||
|location=[[Location::Chop Saw Station|chop saw station]] | |location=[[Location::Chop Saw Station|chop saw station]] | ||
|tutors=[[Tutor::User:Lukas|Lukas]] | |tutors=[[Tutor::User:Lukas|Lukas]] | ||
|manual=[https://www.manualslib.com/manual/1160415/Herkules-Ksz-2100.html#manual ManualsLib] | |manual=[https://www.manualslib.com/manual/1160415/Herkules-Ksz-2100.html#manual ManualsLib] | ||
}} | }} | ||
'''This tool is broken (probably an issue with the carbon brushes) but we are [https://github.com/comakingspace/do-something/issues/178 preparing to get a replacement].''' | |||
other shortcomings: | |||
* The work rests are crap and should be replaced by something, e.g. T-shaped wooden supports, at the proper height (see [https://github.com/comakingspace/do-something/issues/11 issue #11]). | |||
* There is a clamping point on the right side of the blade, but when you actually put the clamp in there the motor will hit it. Could be fixed by adding a compatible hole (or simply another clamp) about 10 cm further to the right...very smart design -.- | |||
<br clear=all> | |||
== Elektra Beckum KS 210 HM Plus == | == Elektra Beckum KS 210 HM Plus == | ||
{{MachineInfoBox | {{MachineInfoBox | ||
Revision as of 23:58, 28 February 2020
| MachineInfoBox Bosch GCM 12 GDL | |
|---|---|
| |
| Synonyms: | sliding compound miter saw; DE: Kappsäge, Kapp-, Zug- und Gehrungssäge, Zugkappsäge |
| Material: | wood |
| Used with: | circular saw blades, shop vac, inclinometer |
| Access Requirements: | Chop Saw Introduction |
| Manual: | bosch-professional.com |
| Tutors: | Lukas NitramLegov Pakue Johannes Luzian Keno Utis Sebastian Jakob Loewenstein |
| Similar (More or Less): | miter saw, circular saw, table saw, radial arm saw |
[[Has caption::power tool/saw| ]]
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Bosch GCM 12 GDL | done |
| Take a picture | - | pending |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
A chop saw is an electric miter saw (BE: mitre saw) and consists of a large circular saw and a sturdy frame. Movement of the saw head is restricted by a sliding rail which can be angled both vertically and horizontally ("compound miter").
For the hand tool capable of making only horizontally angled cuts, see miter saw.
Safety
Always keep your hands clear of the blade path and use the machine's clamp and the back fence to hold your workpiece in place. Before turning on the power at all, make sure you understand how the saw head will move and double check that all restraints are properly and tightly adjusted.
Cutting Angles
Miter angle (horizontal): left/right 45°
Bevel angle (vertical): left 0-47° right 0-47&
Adjusting miter:
- Loosen locking screw in the front
- Pull "miter presetting lever" [12]
- can be locked up with a locking clamp [10]
- Move to desired angle (indents at 45°, 31,6°, 22,5°, 15°, 0°, 15°, 22,5°, 31,6°, 45°, 60°)
- tighten locking screw before cutting!
Adjusting bevel
- Loosen the locking lever [13]
- The saw can now be tilted up to 45° to the left
- In order to tilt to the right (or further than 45°) the rotary knob [39] on the right needs to be turned to the desired direction.
- if the knob is hard to turn, push the saw slightly in the other direction before turning the knob
- Push the locking lever back down
- Check the travel before making the cut. If necessary move the fences to clear all the parts of the saw.
Blade
Our saw is designed for saw blades measuring 305 × 30 × 1,7-2,6 mm (OD × bore × thickness).
The currently installed blade is a Bosch "expert Wood" 305 × 30 × 2.4 mm one with 72 carbide-tipped teeth.
Noise & Dirt
If you are not alone, ask the others whether it is okay to cut for a few minutes as they may have to interrupt their project to give you room and to protect their ears. Although the saw is not extremely loud, it is definitely startling when you are surprised by it turning on in your back!
It's advisable to hook up a shop vac for dust extraction as the passive collector bags that typically come with this kind of tool are not too efficient. Even the shop vac will let a lot of sawdust escape.
Maintenance
The blade should be sharpened or replaced when it becomes dull, otherwise using it is very dangerous! Tell a manager if you are noticing any problems, e.g. increased force required to cut your workpieces or poor quality cuts.
Decreased cutting ability can also result from dirt buildup - here are some cleaning instructions.
Potential Upgrades
- It's possible to create a "shadow line" indicating your cut location by carefully positioning an LED right above the blade. [1]
- we should get (or make!) a "10 Million Dollar Stick" to use instead of the built-in clamp for small pieces
Herkules KSZ 2100
Our Herkules KSZ 2100 is broken and will get replaced by the above mentioned Bosch GCM 12 GDL.
| MachineInfoBox Herkules KSZ 2100 | |
|---|---|
| |
| Access Requirements: | Chop Saw Introduction |
| Manual: | ManualsLib |
| Tutors: | Lukas NitramLegov Pakue Johannes Luzian Keno Utis Sebastian Jakob Loewenstein |
This tool is broken (probably an issue with the carbon brushes) but we are preparing to get a replacement.
other shortcomings:
- The work rests are crap and should be replaced by something, e.g. T-shaped wooden supports, at the proper height (see issue #11).
- There is a clamping point on the right side of the blade, but when you actually put the clamp in there the motor will hit it. Could be fixed by adding a compatible hole (or simply another clamp) about 10 cm further to the right...very smart design -.-
Elektra Beckum KS 210 HM Plus
| MachineInfoBox Elektra Beckum KS 210 HM Plus | |
|---|---|
|
| |
| Synonyms: | compound miter saw; DE: Kappsäge, Kapp- und Gehrungssäge |
| Material: | wood |
| Used with: | circular saw blades, shop vac |
| Access Requirements: | Chop Saw Introduction |
| Tutors: | Lukas NitramLegov Pakue Johannes Luzian Keno Utis Sebastian Jakob Loewenstein |
| Similar (More or Less): | miter saw, circular saw, table saw, radial arm saw |
[[Has caption::power tool/saw| ]]
Martin brought in an alternative chop saw, which needs to be commissioned before it can be used.
If we can get it set up on the same height as the other one and with the fences in one line, both chop saws could be placed pretty close to each other!
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | Elektra Beckum KS 210 HM Plus | done |
| Take a picture | - | pending |
| Find the manual as PDF | needed for all machines - add a link to the InfoBox or comment where you could not find it | pending |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | - | pending |
| Security Check | to be done or witnessed by a manager | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
