Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
00:46, 7 January 2024 | Bench hook pull.jpg (file) | 1.79 MB | A Bench Hook used at the back instead of front of the workbench to facilitate pull cuts | 1 | |
18:53, 8 February 2018 | Bench vises.jpg (file) | 228 KB | some bench vises in the wood workshop (not in their usual arrangement of course) | 1 | |
18:39, 28 May 2019 | Bessey Winkelspanner.jpg (file) | 1.03 MB | two Bessey corner clamps (probably WS3) in use to assemble a simple cabinet Category:Furniture | 1 | |
19:00, 20 September 2019 | Besteck-Uhr.jpg (file) | 293 KB | Uhr aus alten Gabeln und Löffeln - Messergriffe waren zu dick, um sie gut mit dem Ring zu vernieten. | 1 | |
10:22, 1 September 2017 | Bevel edge chisels.JPG (file) | 173 KB | == Summary == set of four entry quality bevel edge chisels == Licensing == {{CC-by-sa-4.0}} | 1 | |
15:46, 8 February 2024 | Bicycle inner tube.jpg (file) | 4.08 MB | Bicycle Inner Tube and some rings and a small weave made from it | 1 | |
02:01, 8 June 2019 | Bierbankrettung Loch zu.JPG (file) | 424 KB | after getting a very cheap "beer table" with a hole in it, I plugged it with a custom cut piece of fir and sanded it flush after the wood glue was dry | 1 | |
21:24, 18 November 2018 | Bierkastentisch 01.JPG (file) | 408 KB | Platte für einen Bierkastentisch beim Abschleifen mit dem Exzenterschleifer | 1 | |
21:28, 18 November 2018 | Bierkastentisch 02.JPG (file) | 418 KB | Bohren der Befestigungslöcher im Bierkastentisch | 1 | |
21:37, 18 November 2018 | Bierkastentisch 03.JPG (file) | 546 KB | frisch gebohrte Grifflöcher im Bierkastentisch | 1 | |
21:40, 18 November 2018 | Bierkastentisch 04.JPG (file) | 414 KB | Sorgfältig angeordnete Bohrungen mehrmals zu messen, ist nervig - am besten das erste Stück als Bohrschablone verwenden (hier für Griffe am Bierkastentisch)! | 1 | |
21:42, 18 November 2018 | Bierkastentisch 05.jpg (file) | 352 KB | Bierkastentisch in Benutzung (vergleichsweise aufgeräumt) | 1 | |
21:49, 18 November 2018 | Bierkastentisch 06.JPG (file) | 417 KB | unerwartete Bonusfunktion des Bierkastentisches - die Grifflöcher sind perfekte Schnapsglashalter! | 1 | |
21:19, 18 November 2018 | Bierkastentisch SketchUp.PNG (file) | 125 KB | SketchUp-Skizze vom Bierkastentisch im Stil "charcoal loose" | 1 | |
21:05, 18 November 2018 | Bierkastentisch cover.jpg (file) | 743 KB | fertiger Bierkastentisch im Einsatz | 1 | |
09:31, 9 June 2019 | Bike repair stand.JPG (file) | 218 KB | our bike repair stand in the metal workshop | 1 | |
10:35, 24 February 2019 | Birch tealights 01.JPG (file) | 350 KB | Project:Tree Trunk Tealights the store-bought birch logs were a lot wetter than expected and started to grow mold within a few weeks... | 1 | |
10:39, 24 February 2019 | Birch tealights 02.JPG (file) | 406 KB | Project:Tree Trunk Tealights I used the chop saw to cut the logs into approx. 8-10 cm long pieces | 1 | |
10:41, 24 February 2019 | Birch tealights 03.JPG (file) | 432 KB | Project:Tree Trunk Tealights where the logs were too thick for the rather small chop saw, manual labor with a crosscut saw was necessary | 1 | |
10:44, 24 February 2019 | Birch tealights 04.JPG (file) | 406 KB | Project:Tree Trunk Tealights after the cut pieces were left sitting on my CoMaking bench for a week, a lot of mold had formed again -.- | 1 | |
10:46, 24 February 2019 | Birch tealights 05.JPG (file) | 408 KB | Project:Tree Trunk Tealights we proceeded with sanding off the mold and applying some leftover hard wax oil to cover the cut faces against new mold formation | 1 | |
10:49, 24 February 2019 | Birch tealights 06.JPG (file) | 365 KB | Project:Tree Trunk Tealights applying some leftover hard wax oil to cover the cut faces against new mold formation | 1 | |
10:53, 24 February 2019 | Birch tealights 07.JPG (file) | 5.62 MB | Project:Tree Trunk Tealights another week of drying on my CoMaking bench, this time more evenly spaced... | 1 | |
10:55, 24 February 2019 | Birch tealights 08.JPG (file) | 291 KB | Project:Tree Trunk Tealights there was still a bit of new mold after all the efforts, but it was easily sanded off by hand on a clamped-down piece of sandpaper | 1 | |
00:08, 3 March 2019 | Birch tealights 09.JPG (file) | 372 KB | Project:Tree Trunk Tealights after the logs finally seemed dry enough to stop supporting mold, holes could be drilled with a large Forstner bit | 1 | |
00:16, 3 March 2019 | Birch tealights 10.JPG (file) | 405 KB | Project:Tree Trunk Tealights more drilling...so good to have a drill press available! | 1 | |
00:19, 3 March 2019 | Birch tealights 11.JPG (file) | 774 KB | Project:Tree Trunk Tealights after shaping, the ends were finished with coconut oil | 1 | |
00:21, 3 March 2019 | Birch tealights 12.JPG (file) | 376 KB | Project:Tree Trunk Tealights further drying - important: insert the steel cups early so the logs shrink around them, not too far! | 1 | |
17:38, 7 June 2019 | Birgitts bible covers.JPG (file) | 404 KB | decorative bible covers I helped Birgitt make: laser engraved patterns and "holy" water/soil under acrylic glass | 1 | |
00:04, 4 November 2021 | Biscuits explained.svg (file) | 21 KB | illustration of the way biscuits keep boards aligned during a glue-up quickly drawn in Inkscape | 1 | |
10:44, 1 September 2017 | Blade-change screwdrivers.JPG (file) | 353 KB | == Summary == Two "blade-change screwdrivers" in their case. Do you know what the actual name of these is? == Licensing == {{CC-by-sa-4.0}} | 1 | |
02:54, 6 January 2018 | Blast cabinet open.JPG (file) | 340 KB | blast cabinet with its lid propped open | 1 | |
11:06, 1 September 2017 | BlenderCAM.png (file) | 339 KB | == Summary == screenshot of Blender CAM == Licensing == {{PD}} | 1 | |
10:21, 4 September 2017 | Blind rivets.jpg (file) | 622 KB | == Summary == two blind rivets before use and one being pulled flat by a rivet gun (not making much sense without anything to hold together though) == Licensing == {{CC-by-sa-4.0}} | 1 | |
01:24, 22 March 2018 | Blow gun.JPG (file) | 443 KB | simple blow gun to use with pressurized air from a compressor | 1 | |
03:44, 28 October 2023 | Bottle cutter.jpg (file) | 4.42 MB | Self-made Bottle Cutter | 1 | |
20:51, 7 December 2023 | Bottle cutting.jpg (file) | 896 KB | Repeated temperature shocks (white bucket: ice water; black bucket & kettle: hot water) break a bottle that was scored with the Bottle Cutter | 1 | |
19:25, 28 September 2018 | Bowl gouge.svg (file) | 9 KB | square version | 2 | |
21:29, 19 March 2018 | CNC room.JPG (file) | 201 KB | as much of the CNC room as I could fit on one photo (mostly the CNC router) | 1 | |
15:03, 8 July 2018 | CNC router.gif (file) | 3.74 MB | WorkBee CNC router cutting a circular pocket into a piece of eukalyptus glued laminated timber. GIF created with [https://giphy.com/create/gifmaker Giphy]. | 1 | |
13:30, 8 July 2018 | CNC workholding - wood screws.JPG (file) | 434 KB | driving wood screws through your workpiece and into the spoilboard is a very simple CNC workholding option | 1 | |
21:20, 19 August 2017 | Calendar-icon.png (file) | 70 KB | Source: https://openclipart.org/detail/10792/calendar | 1 | |
11:07, 1 September 2017 | Caliper2.jpg (file) | 147 KB | == Summary == Photo of a digital caliper. == Licensing == {{PD}} | 1 | |
21:51, 14 February 2018 | Cam clamp glue-up.JPG (file) | 248 KB | gluing together the frame of a laser cut word clock with cam clamps | 1 | |
22:09, 14 February 2018 | Cam clamps with masking tape.JPG (file) | 366 KB | To avoid gluing your workpiece to wooden cam clamps, stick a bit of masking tape over the clamp jaws! | 1 | |
01:59, 13 July 2019 | Captive rings - test01.JPG (file) | 512 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 | |
02:00, 13 July 2019 | Captive rings - test02.JPG (file) | 461 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 | |
02:08, 13 July 2019 | Captive rings - test03.JPG (file) | 450 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 | |
02:14, 13 July 2019 | Captive rings - test04.JPG (file) | 433 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) | 1 | |
02:25, 13 July 2019 | Captive rings - test05.JPG (file) | 409 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel | 1 |