Uploads by Lukas
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 20:52, 16 September 2019 | Skibogen v1.2.jpg (file) |  |
853 KB | Mein erster funktionierender Bogen aus Langlaufski (zweite Version des Mittelstücks) | 1 |
| 23:59, 11 September 2019 | Pruning saw.jpg (file) |  |
3.69 MB | A large pruning saw | 1 |
| 15:32, 6 September 2019 | Danger - fire.svg (file) |  |
3 KB | warning icon EN ISO 7010 W021 - "Combustible and flammable materials"/"Warnung vor feuergefährlichen Stoffen" This sign means there is a danger of fire due to a machine, tool or material! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W021.sv... | 1 |
| 01:10, 5 September 2019 | Simple bandsaw fence.jpg (file) |  |
3.34 MB | Manu using the bandsaw fence he made | 1 |
| 20:08, 1 September 2019 | Protection - protective clothing.svg (file) |  |
3 KB | mandatory action icon EN ISO 7010 W010 - "use protective clothing"/''"Schutzkleidung benutzen"'' This sign means you need to wear protective clothing to protect yourself. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M010.svg (public domain) | 1 |
| 20:02, 1 September 2019 | Danger - high voltage.svg (file) |  |
3 KB | warning icon EN ISO 7010 W012 - "high voltage"/''"Warnung vor elektrischer Spannung"'' This sign means you may be exposed to high voltage, risking electric shock. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W012.svg (public domain) | 1 |
| 19:40, 1 September 2019 | Protection - welding mask.svg (file) |  |
4 KB | mandatory action icon EN ISO 7010 W019 - "wear a welding mask"/''"Schweißmaske benutzen"'' This sign means you need to wear a welding mask to protect your eyes and face. source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M019.svg... | 1 |
| 17:16, 1 September 2019 | Danger - optical radiation.svg (file) |  |
2 KB | warning icon EN ISO 7010 W024 - "warning for optical radiation"/''"Warnung vor optischer Strahlung"'' This sign means you can encounter dangerous optical radiation (light). source: https://de.wikipedia.org/wiki/Datei:ISO_7010_W027.svg (public domain) | 1 |
| 16:56, 1 September 2019 | Danger - hand injury.svg (file) |  |
1 KB | warning icon EN ISO 7010 W024 - "hand injury"/''"Warnung vor Handverletzungen"'' This sign means you can encounter moving workpieces or machine parts that may hurt your hands (or other bodyparts). source: https://commons.wikimedia.org/wiki/File:ISO_7... | 1 |
| 16:11, 12 August 2019 | Protection - gloves.svg (file) |  |
5 KB | mandatory action icon EN ISO 7010 M009 - "use protective handwear"/''"Handschutz benutzen"'' This sign means you should wear gloves to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M009.svg (public domain) | 1 |
| 16:11, 12 August 2019 | Danger - heat.svg (file) |  |
1 KB | warning icon EN ISO 7010 W017 - "warning for hot surface"/''"Warnung vor heißer Oberfläche"'' This sign means you could encounter hot workpieces or machine parts! Wear gloves if you can't avoid contact altogether. source: https://de.wikipedia.org/w... | 1 |
| 15:29, 9 August 2019 | Protection - hearing.svg (file) |  |
4 KB | mandatory action icon EN ISO 7010 M003 - "use hearing protection"/''"Gehörschutz benutzen"'' This sign means you should wear hearing protection to protect your ears! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M003.sv... | 1 |
| 16:01, 7 August 2019 | Danger - draw-in.svg (file) |  |
5 KB | warning icon EN ISO 7010 W025 - "counter rotating roller"/''"Warnung vor gegenläufigen Rollen"'' You may see this sign in this wiki or our Space if a machine can draw the user (or any body parts/clothing/jewellery) in, e.g. * between rotating parts *... | 1 |
| 16:00, 7 August 2019 | Protection - no gloves.svg (file) |  |
6 KB | prohibition icon EN ISO 7010 P028 - "do not wear gloves"/''"Benutzen von Handschuhen verboten"'' This sign means you should NOT wear gloves! A common reason for this is an increased risk of draw-in ''(Einzug)''. source: https://de.wikipedia.org/w... | 1 |
| 15:59, 7 August 2019 | Protection - goggles.svg (file) |  |
7 KB | mandatory action icon EN ISO 7010 M004 - "use protective eyewear"/''"Augenschutz benutzen"'' This sign means you should wear goggles to protect your eyes! source: https://de.wikipedia.org/wiki/Datei:ISO_7010_M004.svg (public domain) | 1 |
| 15:55, 7 August 2019 | Danger - sudden start.svg (file) |  |
4 KB | warning icon EN ISO 7010 W018 - "remotely started equipment"/''"Warnung vor automatischem Anlauf"'' You may see this sign in this wiki or our Space if... * a machine can start unexpectedly, e.g. after returning lost power * a machine is started by a c... | 1 |
| 16:09, 25 July 2019 | Woodturning - tenon by parting tool.gif (file) |  |
2.1 MB | Lukas demonstrating some simple woodturning at the Bahnstadtfest 2019: turning a tenon with a parting tool (e.g. for the end of a file handle) Video shot & shared under Creative Commons by [[User:Narqu... | 1 |
| 15:59, 17 July 2019 | Splashing solder - it happens!.png (file) |  |
3.31 MB | splashing liquid metal is a real risk while soldering, so you should wear eye protection! | 1 |
| 10:06, 14 July 2019 | Captive rings 16.jpg (file) |  |
834 KB | Project:Captive Ring Turning done! | 1 |
| 10:00, 14 July 2019 | Captive rings 15.JPG (file) |  |
484 KB | Project:Captive Ring Turning one more waxing step with hot air... | 1 |
| 09:56, 14 July 2019 | Captive rings 14.JPG (file) |  |
510 KB | Project:Captive Ring Turning after parting the piece off on the lathe, I sanded the ends by hand (although a disc sander would have been much better) | 1 |
| 09:51, 14 July 2019 | Captive rings 13.JPG (file) |  |
455 KB | Project:Captive Ring Turning waxing the rings is not possible with the friction method as they would just stop spinning - use a hot air gun instead | 1 |
| 09:47, 14 July 2019 | Captive rings 12.JPG (file) |  |
363 KB | Project:Captive Ring Turning even out the beeswax and work it in deeper with a paper towel | 1 |
| 09:41, 14 July 2019 | Captive rings 11.JPG (file) |  |
343 KB | Project:Captive Ring Turning applying beeswax is easy with the lathe spinning - most of it melts just by friction! | 1 |
| 09:34, 14 July 2019 | Captive rings 10.JPG (file) |  |
415 KB | Project:Captive Ring Turning sanding the rings' insides is possible by taping some sandpaper to the spinning middle section and holding the rings | 1 |
| 09:31, 14 July 2019 | Captive rings 09.JPG (file) |  |
414 KB | Project:Captive Ring Turning give the end knobs some shape until you're happy (don't take too much off the diameter!) | 1 |
| 14:21, 13 July 2019 | Captive rings 08.JPG (file) |  |
444 KB | Project:Captive Ring Turning this part was a bit scary (not tested beforehand): "planing" the middle section with the skew chisel while the rings are taped to the side | 1 |
| 14:20, 13 July 2019 | Captive rings 07.JPG (file) |  |
476 KB | Project:Captive Ring Turning fast forward: two rings are cut! See "Project:Captive Ring Turning#Educative Failures" for more details on this part of the project | 1 |
| 14:16, 13 July 2019 | Captive rings 06.JPG (file) |  |
354 KB | Project:Captive Ring Turning burn marks are to be expected when using a self-made tool for this job - just make sure you don't generate enough heat to crack the wood! | 1 |
| 14:13, 13 July 2019 | Captive rings 05.JPG (file) |  |
380 KB | Project:Captive Ring Turning after defining its outer curve with a parting tool and then a spindle gouge, the future ring is slowly undercut with the hook tool | 1 |
| 08:44, 13 July 2019 | Captive rings 04.JPG (file) |  |
397 KB | Project:Captive Ring Turning sketching the dimensions of the first elements: end knob, gap, ring (1/2 gap width), gap | 1 |
| 08:40, 13 July 2019 | Captive rings 03.JPG (file) |  |
439 KB | Project:Captive Ring Turning first step in pretty much any woodturning project: roughing | 1 |
| 08:37, 13 July 2019 | Captive rings 01.JPG (file) |  |
349 KB | Project:Captive Ring Turning the apple log was dried quite nicely and only had two superficial cracks | 1 |
| 01:44, 13 July 2019 | Captive rings - test13.JPG (file) |  |
406 KB | Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) - a ring! and it's captive! | 1 |
| 01:41, 13 July 2019 | Captive rings - test12.JPG (file) |  |
437 KB | Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) | 1 |
| 01:41, 13 July 2019 | Captive rings - test11.JPG (file) |  |
373 KB | Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) | 1 |
| 01:40, 13 July 2019 | Captive rings - test10.JPG (file) |  |
399 KB | Project:Captive Ring Turning second test with inferior hardwood (store-bought birch) | 1 |
| 01:38, 13 July 2019 | Captive rings - test09.JPG (file) |  |
434 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) | 1 |
| 01:35, 13 July 2019 | Captive rings - test08.JPG (file) |  |
427 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) | 1 |
| 01:34, 13 July 2019 | Captive rings - test07.JPG (file) |  |
431 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) | 1 |
| 01:29, 13 July 2019 | Captive rings - test06.JPG (file) |  |
433 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - defining the ring with a spindle gouge | 1 |
| 01:25, 13 July 2019 | Captive rings - test05.JPG (file) |  |
409 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) - "planing" the blank with a skew chisel | 1 |
| 01:14, 13 July 2019 | Captive rings - test04.JPG (file) |  |
433 KB | Project:Captive Ring Turning first <s>test</s>fail with inferior hardwood (store-bought birch) | 1 |
| 01:08, 13 July 2019 | Captive rings - test03.JPG (file) |  |
450 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 |
| 01:00, 13 July 2019 | Captive rings - test02.JPG (file) |  |
461 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 |
| 00:59, 13 July 2019 | Captive rings - test01.JPG (file) |  |
512 KB | Project:Captive Ring Turning first <s>test</s>fail with softwood (fir) | 1 |
| 00:10, 13 July 2019 | Hook tool 9.JPG (file) |  |
487 KB | Project:Captive Ring Turning#Making the Hook Tool finally grind a scraping tip onto the (former) hex key | 1 |
| 00:06, 13 July 2019 | Hook tool 8.JPG (file) |  |
410 KB | Project:Captive Ring Turning#Making the Hook Tool amazing what you can still make out of a little bit of junk! (rest of the scrap wood for comparison) | 1 |
| 00:03, 13 July 2019 | Hook tool 7.JPG (file) |  |
453 KB | Project:Captive Ring Turning#Making the Hook Tool the hex key and ferrule should be glued in place with epoxy | 1 |
| 23:59, 12 July 2019 | Hook tool 6.JPG (file) |  |
457 KB | Project:Captive Ring Turning#Making the Hook Tool a sturdy tailstock on the wood lathe can help to press the ferrule onto the tool handle | 1 |
