File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 17:53, 27 December 2017 | Güde Drechselbank uninstalled.JPG (file) |  |
426 KB | Lukas (talk | contribs) | "Güde 1000" wood lathe just after arrival | 1 |
| 13:46, 26 December 2017 | Elu BM 11 E.jpg (file) |  |
105 KB | Lukas (talk | contribs) | "Elu BM 11 E" corded drill | 1 |
| 11:19, 26 December 2017 | Drills on the wall.JPG (file) |  |
395 KB | Lukas (talk | contribs) | An impact drill (top left), a rotary hammer (bottom left) and two "normal" electric drills (right) on the wall by our drilling table. | 1 |
| 04:24, 13 December 2017 | Key files.jpg (file) |  |
297 KB | Lukas (talk | contribs) | six key files on a [https://www.thingiverse.com/thing:801756 3D printed rack] | 1 |
| 03:40, 13 December 2017 | Lathe restoration.JPG (file) |  |
340 KB | Lukas (talk | contribs) | our newly arrived Myford ML7 metalworking lathe on the repair table in late 2017 | 1 |
| 21:02, 11 December 2017 | Pins,pins,pins.JPG (file) |  |
633 KB | Lukas (talk | contribs) | picture of a CPU (I think...) | 1 |
| 19:09, 11 December 2017 | Drill repair.JPG (file) |  |
394 KB | Lukas (talk | contribs) | Patrick fixing a broken hammer drill with a wiring diagram from the internet | 1 |
| 20:15, 10 December 2017 | Einhell router.JPG (file) |  |
378 KB | Lukas (talk | contribs) | a router made by Einhell (not sure about the model no.) | 1 |
| 21:24, 8 December 2017 | Cutting corners.JPG (file) |  |
497 KB | Lukas (talk | contribs) | table saw with freshly cut corner clamping jigs | 1 |
| 21:09, 8 December 2017 | Herkules KSZ 2100.JPG (file) |  |
369 KB | Lukas (talk | contribs) | small entry level chop saw | 1 |
| 20:44, 8 December 2017 | Herkules BHK 1600LE.JPG (file) |  |
623 KB | Lukas (talk | contribs) | entry level circular saw | 1 |
| 20:33, 8 December 2017 | Crosscut saw in action.JPG (file) |  |
413 KB | Lukas (talk | contribs) | using a crosscut saw to build a shelf for the office | 1 |
| 18:36, 28 November 2017 | Vise family.jpg (file) |  |
743 KB | Lukas (talk | contribs) | a couple of bench vises and a woodworking vise before they found their home on various workbenches (tweeted by @comakingspace on 2017-11-05 - [https://twitter.com/comakingspace/status/927154888777388032 link]) | 1 |
| 01:36, 15 November 2017 | Ryoba.JPG (file) |  |
476 KB | Lukas (talk | contribs) | a Japanese "Ryoba" saw | 1 |
| 00:55, 15 November 2017 | Clamping corners.JPG (file) |  |
464 KB | Lukas (talk | contribs) | two corner clamping jigs in use during a locker build | 1 |
| 00:41, 15 November 2017 | Simple corner clamping jigs.JPG (file) |  |
386 KB | Lukas (talk | contribs) | simple corner clamping jigs made by cutting square boards in half and drilling two holes into each piece with a 35 mm Forstner bit | 1 |
| 00:31, 15 November 2017 | Jointer plane.jpg (file) |  |
871 KB | Lukas (talk | contribs) | a jointer plane being used to flatten a Roubo workbench | 1 |
| 00:22, 15 November 2017 | Holdfast and Ryoba.JPG (file) |  |
383 KB | Lukas (talk | contribs) | Sawing a piece of plywood with a Ryoba - a holdfast makes sure nothing moves! | 1 |
| 00:18, 15 November 2017 | Spade drill bits.JPG (file) |  |
299 KB | Lukas (talk | contribs) | a couple of spade bits | 1 |
| 23:43, 14 November 2017 | Hand tools and shavings.jpg (file) |  |
326 KB | Lukas (talk | contribs) | some hand tools on top of a Roubo workbench along with a bunch of plane shavings | 1 |
| 10:49, 13 November 2017 | UniCoFil rainbow.JPG (file) |  |
212 KB | Lukas (talk | contribs) | a spool of "rainbow" PLA filament from UniCoFil | 1 |
| 19:43, 11 November 2017 | Wood workshop.JPG (file) |  |
497 KB | Lukas (talk | contribs) | Our wood workshop in its early days - storage projects are just starting and our first Roubo workbench is still in progress. | 1 |
| 19:27, 11 November 2017 | Forstner-shavings.JPG (file) |  |
373 KB | Lukas (talk | contribs) | Forstner bits are not designed to transport wood shavings very well, so you may want to clean the hole now and then... | 1 |
| 14:30, 31 October 2017 | Surform plane.JPG (file) |  |
477 KB | Lukas (talk | contribs) | Using a surform plane on a locker door made from plywood. The left hand would of course guide the front of the tool when not busy with a camera ;-) | 1 |
| 14:21, 31 October 2017 | Step drill bit vs pipe.JPG (file) |  |
249 KB | Lukas (talk | contribs) | Drilling a hole for a blind rivet into aluminum and steel pipes for our coat rack, using a step drill bit | 1 |
| 17:08, 5 October 2017 | Roubo detailed.PNG (file) |  |
497 KB | Lukas (talk | contribs) | Relatively detailed sketch of a "Roubo workbench" created in SketchUp. Imported (and modified) models: "Anant Record 53 Vise Simplified (2)" by SchreiberBike and "Holdfast" by Chris, big thanks to the artists! | 1 |
| 11:57, 4 October 2017 | Roubo sketch.PNG (file) |  |
43 KB | Lukas (talk | contribs) | early SketchUp draft of a basic "Roubo workbench" | 1 |
| 09:24, 28 September 2017 | Horizontal drill jig.jpeg (file) |  |
513 KB | Lukas (talk | contribs) | Some jigs can be hacked together in a few minutes, such as this fixture for horizontal drilling that consists of scrap wood and some clamps. | 1 |
| 12:56, 20 September 2017 | Vertical approach.PNG (file) |  |
38 KB | Lukas (talk | contribs) | Sketch for lockers with one shared vertical frame per six locker unit (doors omitted for simplicity) - designed in SketchUp. | 1 |
| 12:44, 20 September 2017 | Horizontal approach.PNG (file) |  |
30 KB | Lukas (talk | contribs) | Sketch for lockers which are made up of two horizontal boxes per six locker unit (doors omitted for simplicity) Designed in SketchUp. | 1 |
| 18:05, 19 September 2017 | Sketching lockers.PNG (file) |  |
69 KB | Lukas (talk | contribs) | drafting the first locker prototype in SketchUp | 1 |
| 16:34, 11 September 2017 | Wired 'battery' pack.JPG (file) |  |
324 KB | Lukas (talk | contribs) | Bosch PSR 960 compatible power supply adapter based on an old NiCd battery pack (see Project:Semi-Cordless Drill for details) | 1 |
| 00:43, 9 September 2017 | Patrick.jpg (file) |  |
310 KB | Pakue (talk | contribs) | Patrick | 1 |
| 23:08, 7 September 2017 | Icon comakingspace.png (file) |  |
1 KB | Pakue (talk | contribs) | 128x128 image of the CoMakingSpace-Co | 1 |
| 21:19, 7 September 2017 | Ciaran Printer.jpg (file) |  |
981 KB | Ciaran (talk | contribs) | Ciaran with Prusa Printer | 1 |
| 21:13, 7 September 2017 | Ciaran Sketch.jpg (file) |  |
5 KB | Ciaran (talk | contribs) | Photo for Ciaran user page | 1 |
| 20:54, 6 September 2017 | Metal parts.JPG (file) |  |
783 KB | Lukas (talk | contribs) | == Summary == Base for a {{mpi}} of different metal parts. Interactive version found at Category:Metal Parts. All photos are original work; background removed in GIMP. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:16, 6 September 2017 | Spalted wood disc.JPG (file) |  |
397 KB | Lukas (talk | contribs) | section of a log showing some spalting | 1 |
| 10:13, 6 September 2017 | Lexmark X1270.JPG (file) |  |
305 KB | Lukas (talk | contribs) | Lexmark X1270, a donated inkjet printer in our starting phase | 1 |
| 17:08, 5 September 2017 | Vernier Caliper.JPG (file) |  |
1.25 MB | Lukas (talk | contribs) | a Vernier caliper sticking out of its protective leather sheath Photo by Janik M. Dietz | 1 |
| 17:07, 5 September 2017 | MarkSolid wiped off.jpg (file) |  |
301 KB | Lukas (talk | contribs) | a piece of aluminum with lasting marks left by heat-fused laser marking spray Photo by Janik M. Dietz | 1 |
| 17:05, 5 September 2017 | MarkSolid coated.JPG (file) |  |
269 KB | Lukas (talk | contribs) | scaled down | 2 |
| 17:05, 5 September 2017 | MarkSolid engraved.jpg (file) |  |
282 KB | Lukas (talk | contribs) | scaled down | 2 |
| 16:14, 5 September 2017 | Fill-in paint.jpg (file) |  |
55 KB | Lukas (talk | contribs) | two sticks of fill-in paint for engravings | 1 |
| 16:13, 5 September 2017 | Fill-in paint result.jpg (file) |  |
49 KB | Lukas (talk | contribs) | engraving in acrylic glass accentuated with fill-in paint | 1 |
| 16:12, 5 September 2017 | Applying fill-in paint 5.jpg (file) |  |
51 KB | Lukas (talk | contribs) | see Material:Fill-In Paint for details | 1 |
| 16:12, 5 September 2017 | Applying fill-in paint 4.jpg (file) |  |
38 KB | Lukas (talk | contribs) | see Material:Fill-In Paint for details | 1 |
| 16:12, 5 September 2017 | Applying fill-in paint 3.jpg (file) |  |
51 KB | Lukas (talk | contribs) | see Material:Fill-In Paint for details | 1 |
| 16:12, 5 September 2017 | Applying fill-in paint 2.jpg (file) |  |
52 KB | Lukas (talk | contribs) | see Material:Fill-In Paint for details | 1 |
| 16:09, 5 September 2017 | Applying fill-in paint 1.jpg (file) |  |
57 KB | Lukas (talk | contribs) | see Material:Fill-In Paint for details! | 1 |
