File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 14:45, 1 September 2017 | Laser Cutter partially cleaned lens.JPG (file) |  |
1.14 MB | Lukas (talk | contribs) | == Summary == Partially cleaned laser cutter lens == Licensing == {{PD}} | 1 |
| 14:44, 1 September 2017 | Laser Cutter Lens.jpeg (file) |  |
1.11 MB | Lukas (talk | contribs) | == Summary == Disassembled lens frame of an Epilog laser cutter. '''Green Arrow''': screw for releasing primary mirror. '''Red Arrows''': screws for disassembling the lens frame (e.g. for cleaning). == Licensing == {{PD}} | 1 |
| 14:40, 1 September 2017 | Kapton-tape.jpg (file) |  |
145 KB | Lukas (talk | contribs) | roll of "Kapton" polyimide tape | 1 |
| 14:39, 1 September 2017 | Jeweler's screwdrivers.JPG (file) |  |
313 KB | Lukas (talk | contribs) | == Summary == Set of jeweler's screwdrivers including some small wrenches in the same style. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:38, 1 September 2017 | Jar jar shelf 4-5.JPG (file) |  |
254 KB | Lukas (talk | contribs) | == Summary == Placing a piece of scrap wood between your workpiece and a hammer helps to avoid unsightly dents and discolorations! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:37, 1 September 2017 | Image map editor.PNG (file) |  |
640 KB | Lukas (talk | contribs) | == Summary == Screenshot of the [http://www.maschek.hu/imagemap/imgmap "Online Image Map Editor"] that is a great tool for creating HTML code for clickable Imagemaps. Capture contains content from a free online tool published under the Open Source... | 1 |
| 14:34, 1 September 2017 | Ifixit kit open.jpg (file) |  |
299 KB | Lukas (talk | contribs) | == Summary == photo of an IFixit Pro Tech Toolkit == Licensing == {{PD}} | 1 |
| 14:33, 1 September 2017 | Hot air gun.JPG (file) |  |
280 KB | Lukas (talk | contribs) | == Summary == a hot air gun in its box == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:32, 1 September 2017 | Hole saw.JPG (file) |  |
141 KB | Lukas (talk | contribs) | an adjustable hole saw - blades of other sizes not shown | 1 |
| 14:30, 1 September 2017 | Hole punches.JPG (file) |  |
250 KB | Lukas (talk | contribs) | == Summary == hole punches from 2.5 to 10 mm == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:28, 1 September 2017 | Hex nuts.JPG (file) |  |
248 KB | Lukas (talk | contribs) | == Summary == a pile of M6 hex nuts == Licensing == {{PD}} | 1 |
| 14:26, 1 September 2017 | Heat-shrink.jpg (file) |  |
230 KB | Lukas (talk | contribs) | assorted heat shrink tubing | 1 |
| 14:23, 1 September 2017 | Hammers.jpg (file) |  |
266 KB | Lukas (talk | contribs) | a shoemaker's hammer (front) and two ''Schlosserhämmer'' ("machinist's hammers") | 1 |
| 14:22, 1 September 2017 | Hammer quick repair.JPG (file) |  |
257 KB | Lukas (talk | contribs) | == Summary == when you feel a hammer's head loosening, try hitting it on a hard surface with the '''handle first''' - if that does not help, report it as broken! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:21, 1 September 2017 | Grey bit set.JPG (file) |  |
353 KB | Lukas (talk | contribs) | == Summary == Lukas' "grey bit set", including screwdriver bits and bit screwdrivers as well as some Torx and hex keys == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:13, 1 September 2017 | Glue sticks.JPG (file) |  |
79 KB | Lukas (talk | contribs) | == Summary == some glue sticks == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:12, 1 September 2017 | Git-Seminar.pdf (file) |  |
149 KB | Lukas (talk | contribs) | == Summary == Slides for the Git Seminar - author: Mitja == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:08, 1 September 2017 | Forstner bits in case.jpg (file) |  |
1,006 KB | Lukas (talk | contribs) | == Summary == entry level set of Forstner bits in their case (and some protective plastic...) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:06, 1 September 2017 | Foam rubber.jpg (file) |  |
1.2 MB | Lukas (talk | contribs) | == Summary == some laser cut parts out of foam rubber, demonstrating the flexibility of this material == Licensing == {{CC-by-sa-4.0}} | 1 |
| 14:05, 1 September 2017 | Filament N-A.jpg (file) |  |
4 KB | Lukas (talk | contribs) | == Summary == picture to be displayed in the 3D printing materials table when no filament photo is available (yet) == Licensing == {{PD}} | 1 |
| 14:02, 1 September 2017 | Arboblend Filament.jpg (file) |  |
395 KB | Lukas (talk | contribs) | closeup of some Arboblend filament by UniCoFil | 1 |
| 14:00, 1 September 2017 | F-clamp.JPG (file) |  |
234 KB | Lukas (talk | contribs) | == Summary == a small F-clamp == Licensing == {{CC-by-sa-4.0}} | 1 |
| 12:54, 1 September 2017 | Egg CC.jpg (file) |  |
159 KB | Lukas (talk | contribs) | creating a simple shape in [http://www.cookiecaster.com/ Cookie Caster]: # blue dots are drawn with the pen tool and represent corners # orange points can be dragged once the outline is complete to create curves | 1 |
| 12:30, 1 September 2017 | Ear defenders.JPG (file) |  |
122 KB | Lukas (talk | contribs) | == Summary == Ear defenders serve to protect your hearing (if worn) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 12:29, 1 September 2017 | Drill press with lever clamp.JPG (file) |  |
392 KB | Lukas (talk | contribs) | == Summary == Besides machine vises, some clamps are compatible with the standard table of a drill press. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:30, 1 September 2017 | Drift punch.JPG (file) |  |
206 KB | Lukas (talk | contribs) | == Summary == 4 mm drift punch, used for sinking nails into wood without damaging the surroundings == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:28, 1 September 2017 | Dowel centers.JPG (file) |  |
226 KB | Lukas (talk | contribs) | == Summary == simple but very useful markers for dowel peg hole alignment in wood == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:25, 1 September 2017 | Double-sided-tape.jpg (file) |  |
137 KB | Lukas (talk | contribs) | A roll of double-sided tape. | 1 |
| 11:24, 1 September 2017 | Door lock preparation.JPG (file) |  |
202 KB | Lukas (talk | contribs) | == Summary == Making room for the frame-bound part of a door lock with a bevel edge chisel. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:20, 1 September 2017 | King Craft WS-125.jpg (file) |  |
364 KB | Lukas (talk | contribs) | photo of a disc grinder | 1 |
| 11:19, 1 September 2017 | Cura-icon.png (file) |  |
3 KB | Lukas (talk | contribs) | == Summary == Source: http://software.ultimaker.com/res/cura-icon.png == Licensing == {{Unknown_copyright}} | 1 |
| 11:17, 1 September 2017 | Corner clamps.JPG (file) |  |
247 KB | Lukas (talk | contribs) | == Summary == 3D printed corner clamps, based on [http://www.thingiverse.com/thing:713236 a great design] by Thingiverse user ''oikos''. == Licensing == {{PD}} | 1 |
| 11:16, 1 September 2017 | Complicated cookies.JPG (file) |  |
510 KB | Lukas (talk | contribs) | 3D printed panda and fruit fly cookie cutters made with "Cookie Caster" and Tinkercad as described on the cookie cutter project page | 1 |
| 11:12, 1 September 2017 | Combination wrenches.JPG (file) |  |
205 KB | Lukas (talk | contribs) | == Summary == Set of combination wrenches between 6 and 22 mm. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:11, 1 September 2017 | Chicken wire.jpg (file) |  |
265 KB | Lukas (talk | contribs) | a roll of chicken wire | 1 |
| 11:10, 1 September 2017 | Center punch.JPG (file) |  |
210 KB | Lukas (talk | contribs) | == Summary == center punch, used to mark or provide a starting point for drilling on metals == Licensing == {{CC-by-sa-4.0}} | 1 |
| 11:07, 1 September 2017 | Caliper2.jpg (file) |  |
147 KB | Lukas (talk | contribs) | == Summary == Photo of a digital caliper. == Licensing == {{PD}} | 1 |
| 11:06, 1 September 2017 | BlenderCAM.png (file) |  |
339 KB | Lukas (talk | contribs) | == Summary == screenshot of Blender CAM == Licensing == {{PD}} | 1 |
| 10:44, 1 September 2017 | Blade-change screwdrivers.JPG (file) |  |
353 KB | Lukas (talk | contribs) | == Summary == Two "blade-change screwdrivers" in their case. Do you know what the actual name of these is? == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:22, 1 September 2017 | Bevel edge chisels.JPG (file) |  |
173 KB | Lukas (talk | contribs) | == Summary == set of four entry quality bevel edge chisels == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:18, 1 September 2017 | Battery AAA.jpg (file) |  |
117 KB | Lukas (talk | contribs) | == Summary == photo of an AAA battery | 1 |
| 10:17, 1 September 2017 | Battery AA.jpg (file) |  |
114 KB | Lukas (talk | contribs) | photo of an AA battery | 1 |
| 10:14, 1 September 2017 | Battery 9V.jpg (file) |  |
165 KB | Lukas (talk | contribs) | This type of battery is commonly known as a 9 V block. | 1 |
| 10:12, 1 September 2017 | Good dog.PNG (file) |  |
231 KB | Lukas (talk | contribs) | == Summary == snip of a dog from a group photograph before being placed into a new setting by means of GIMP == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:10, 1 September 2017 | Bad dog.PNG (file) |  |
286 KB | Lukas (talk | contribs) | == Summary == snip of a dog placed into a photograph it didn't belong into with GIMP == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:09, 1 September 2017 | Axis with E-rings.JPG (file) |  |
385 KB | Lukas (talk | contribs) | == Summary == several rotary parts held in place on their axis by E-rings (black) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:07, 1 September 2017 | Angle brackets.JPG (file) |  |
238 KB | Lukas (talk | contribs) | == Summary == three 25 mm angle brackets == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:05, 1 September 2017 | Adjustable wrench.JPG (file) |  |
463 KB | Lukas (talk | contribs) | == Summary == an adjustable wrench == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:04, 1 September 2017 | Acetone.jpg (file) |  |
189 KB | Lukas (talk | contribs) | == Summary == Photo of an acetone can == Licensing == {{PD}} | 1 |
| 09:40, 1 September 2017 | Hot air paint removal.JPG (file) |  |
360 KB | Lukas (talk | contribs) | == Summary == scraping paint off a piece of wood with a hot air gun and a spatula == Licensing == {{CC-by-sa-4.0}} | 1 |
