Laser Cutter: Difference between revisions
(price/value has been inventorized) |
(→Possible Materials (Cutting/Engraving): Kraftplex) |
||
| (34 intermediate revisions by 6 users not shown) | |||
| Line 1: | Line 1: | ||
'' | '''The laser cutter must only be operated by members who have received a [[Laser Cutter Introduction|detailed introduction]]!''' | ||
On the introduction page, you can find a '''[[Laser_Cutter_Introduction#Workflow|detailed workflow]]''' from creating a [[Format:DXF|DXF]] file to the final product. | |||
If you need to transfer files to the PC next to the Laser Cutter, you can drop them to our [https://cloud.comaking.space/s/LaserFiles Nextcloud]. The files will automatically synchronize to the Laser PC and can be used further from there. Please note that files in this folder will be deleted regularly. | |||
== Safety Concerns == | == Safety Concerns == | ||
A laser cutter is a delicate and dangerous piece of equipment and should only run under direct supervision of a [[Laser Cutter Introduction|qualified]] user. The machine needs to be supervised even more than the [[3D | A laser cutter is a delicate and dangerous piece of equipment and should only run under direct supervision of a [[Laser Cutter Introduction|qualified]] user. The machine needs to be supervised even more than the [[3D Printers]], with the '''operator standing by during the entire duration of a cutting job and being in close vicinity during engraving jobs'''. | ||
Although the laser beam itself should be certified laser class 1 due to the massive housing and other safety features, the fumes generated when cutting various materials can be harmful to human health (see [[Laser Cutter#Forbidden Materials|forbidden materials]]). A good exhaust filtering system can take care of fumes from the allowed materials but only an outside vent will really remove the smoky smell. | Although the laser beam itself should be certified laser class 1 due to the massive housing and other safety features, the fumes generated when cutting various materials can be harmful to human health (see [[Laser Cutter#Forbidden Materials|forbidden materials]]). A good exhaust filtering system can take care of fumes from the allowed materials but only an outside vent will really remove the smoky smell. | ||
<br clear="all" /> | |||
<!-- NOTE: The following block "imports" content from separate pages - please don't change the code! To edit the actual information, please go back and click "edit" next to the section headline you are interested in :-) --> | |||
{{#ask: | |||
[[MachineType::{{PAGENAME}}]] | |||
|order=ascending | |||
|format=embedded | |||
|embedonly=yes | |||
}} | |||
=== Location Requirements === | === Location Requirements === | ||
| Line 76: | Line 38: | ||
** neoprene | ** neoprene | ||
* materials that contain fluorine (F) - it can kill you and also destroys the machine | * materials that contain fluorine (F) - it can kill you and also destroys the machine | ||
** e.g. [[Material:PTFE|PTFE]] ("Teflon") - very very unhealthy! | ** e.g. [[Material:PTFE|PTFE]] ("Teflon") - [https://www.sympatex.com/en/newsroom/pressemitteilung/new-laboratory-study-reveals-that-highly-toxic-hydrofluoric-and-hydrochloric-acids-are-released-when-ptfe-burns/ very very unhealthy!] | ||
* epoxy resins and materials bonded with epoxy resins | * epoxy resins and materials bonded with epoxy resins | ||
→ with some materials it is not clear whether it contains Cl or F. '''If you are not sure, don't cut or engrave it'''. If you notice '''any unusal coloration''' of the smoke or flame, stop the job immediately! | → with some materials it is not clear whether it contains Cl or F. '''If you are not sure, don't cut or engrave it'''. If you notice '''any unusal coloration''' of the smoke or flame, stop the job immediately! | ||
=== Materials that don't work === | |||
* Polycarbonate (PC) | |||
** will smoke and turn black | |||
* ''Flugzeugsperrholz'' | |||
** too much glue - turns very black and does not cut well | |||
* polystyrene ''("Bastelglas")'' | |||
** NOT the same as acrylic glass! Cuts weld themselves shut; harmful fumes to be expected | |||
=== Possible Materials (Cutting/Engraving) === | === Possible Materials (Cutting/Engraving) === | ||
| Line 87: | Line 58: | ||
* [[wood]] | * [[wood]] | ||
** [[plywood]] | ** [[plywood]] | ||
** [[Kraftplex]] | |||
** particle board/chip board | ** particle board/chip board | ||
** [[MDF]] and [[HDF]] are also allowed but will make frequent [[Laser Cutter#Cleaning of the Optics|lens cleaning]] necessary due to their high glue content | ** [[MDF]] and [[HDF]] are also allowed but will make frequent [[Laser Cutter#Cleaning of the Optics|lens cleaning]] necessary due to their high glue content | ||
| Line 97: | Line 69: | ||
*** not as suitable for engraving because there is no colour difference | *** not as suitable for engraving because there is no colour difference | ||
**** 3D engravable, though - the grooves can be [[Material:Fill-In Paint|filled with paint for a nice effect]] | **** 3D engravable, though - the grooves can be [[Material:Fill-In Paint|filled with paint for a nice effect]] | ||
* [[leather]], but '''no artificial leathers''' | * [[leather]], but '''no artificial leathers''' if they contain chlorine! | ||
* [[paper]] | * [[paper]] | ||
* [[Colored Card|colored card]] | * [[Colored Card|colored card]] | ||
| Line 105: | Line 77: | ||
* [[foam]] | * [[foam]] | ||
* [[fabric]] | * [[fabric]] | ||
* '''some''' polyurethanes depending on additives (see this [https://mediatum.ub.tum.de/doc/603216/603216.pdf study] for some reference [p. 101]) | |||
When cutting wood or acrylic glass, a small flame may be observed at the focal point but is not necessarily a bad thing. However, if it burns too much or is still on when the laser beam is already somewhere else, immediately open the cover. Because the laser automatically shuts down, the fire should go out. | When cutting wood or acrylic glass, a small flame may be observed at the focal point but is not necessarily a bad thing. However, if it burns too much or is still on when the laser beam is already somewhere else, immediately open the cover. Because the laser automatically shuts down, the fire should go out. | ||
| Line 116: | Line 89: | ||
*** only works on blank metal, any coatings will not allow the molecular bond triggered by the laser's heat | *** only works on blank metal, any coatings will not allow the molecular bond triggered by the laser's heat | ||
== Useful Links == | == Useful Links == | ||
''see [[:Category:Laser Cutting]] for many project ideas, tutorials & more!'' | |||
=== Retailer's Information === | |||
HPC, the British company we got the laser cutter from, has some resources we should keep in mind: | |||
* [https://hpclaser.co.uk/how-to-maintain-and-service-your-laser-machine-effectively/ how to maintain and service] | |||
* [http://forum.laserscript.net/index.php LaserScript forum] | |||
* [https://hpclaser.co.uk/wp-content/uploads/2019/07/LS6090-PRO-Data-Sheet-2019a.pdf datasheet for our machine (PDF)] | |||
=== | |||
* | |||
* [http:// | |||
* [ | |||
[[Category:CNC]] | [[Category:CNC]] | ||
[[Category:Laser Cutting]] | [[Category:Laser Cutting]] | ||
Latest revision as of 21:43, 4 October 2024
The laser cutter must only be operated by members who have received a detailed introduction! On the introduction page, you can find a detailed workflow from creating a DXF file to the final product.
If you need to transfer files to the PC next to the Laser Cutter, you can drop them to our Nextcloud. The files will automatically synchronize to the Laser PC and can be used further from there. Please note that files in this folder will be deleted regularly.
Safety Concerns
A laser cutter is a delicate and dangerous piece of equipment and should only run under direct supervision of a qualified user. The machine needs to be supervised even more than the 3D Printers, with the operator standing by during the entire duration of a cutting job and being in close vicinity during engraving jobs.
Although the laser beam itself should be certified laser class 1 due to the massive housing and other safety features, the fumes generated when cutting various materials can be harmful to human health (see forbidden materials). A good exhaust filtering system can take care of fumes from the allowed materials but only an outside vent will really remove the smoky smell.
Laserscript LS6090
| MachineInfoBox Laserscript LS6090 | |
|---|---|
| |
| Synonyms: | DE: Laserschneider, "Lasercutter" |
| Type: | Laser Cutter |
| Material: | wood, glass, acrylic glass, ... (list of cuttable & engravable materials; list of only engravable materials) |
| Used with: | laser exhaust system, water chiller |
| Location: | Laser Area |
| Access Requirements: | Laser Cutter Introduction, Lasercutter-Einweisung |
| Status: | Working |
| Software: | Lasercut 5.3 |
| Manual: | printed copy at the machine |
| Tutors: | NitramLegov Pakue Lmnl99 Johannes Luzian Keno Utis Sebastian Kalunho Björn, NitramLegov Pakue Lmnl99 Johannes Luzian Keno Utis Sebastian Kalunho Björn |
General Information
- power: 80 Watt
- worktable size: 60x90 cm (length x width), engraving a bit smaller
- Z axis (height): 23 cm
- distributor: HPC Lasers
Cost
The tube and filters need to be replaced from time to time which will add up to several hundred €.
Therefore, an appropriate user contribution is 20 ct per minute which you should please throw into the obvious cash box immediately or in advance.
Machine Control
The machine itself is mainly operated by the control panel located on the right side of the machine:
Homing
When you turn on the machine, please press the "Datum" button in order to Home the machine. This is needed so that the machine knows where the laser is located after a restart. The laser will move to the upper right corner of the machine.
Moving the Laser
In order to move the laser to the starting point of your job, please ensure that you are in the main menu and no option is being highlighted. This can be achieved by pressing "ESC" until you see the following:
Now you can move the laser by pressing the directional buttons.
Jog Speed
In case the laser is moving too much or too little with each button press, please go to the jog set menu by using the following key combination: Menu --> Down --> Down --> Enter
In this menu, you can set the jog distance. Please confirm the new distance by pressing Enter.
Starting the Job
After uploading your job to the machine (see LaserCut_5.3#Uploading_your_Job for details), you can start the job by pressing "Start / Pause". The same button will also pause your job in between if needed.
Setting the Focus
In order to set the focus of the laser, please put your workpiece on the tray and put the focus finder (little black 3D printed thingy) on top of it. Now, move the laser above the focus finder and move the tray up (by pressing "up") until you can barely slide the focus finder through the gap. The focus is now set to the surface of your workpiece.
Troubleshooting
Laser keeps starting at the same (wrong) position
Sometimes, the starting point of the laser cutter gets set to a fixed position by accident.
While we are not yet entirely sure how this happens, here's how to fix it:
- Make sure the laser cutter is in the following condition (press
Escuntil the File name gets a grey background): - Press
⏎so that a new menu opens - Select "Cancel" and confirm with
⏎
Location Requirements
- no dust
- 5 °C ≤ room temperature ≤ 25 °C
- max. 70 % humidity
- CO2 fire extinguisher in the area
==> in the eRoom
Rules
- supervise the entire job when cutting
- a fire can only be stopped quick enough if you open the lid immediately!
- stay in close vicinity for the entire job when engraving
- abort if you see, hear or smell anything out of the ordinary!
Forbidden Materials
- materials that contain chlorine (Cl) - it's unhealthy and also destroys the machine
- e.g. PVC ("vinyl", found in most soft plastics and records)
- artificial leather
- neoprene
- materials that contain fluorine (F) - it can kill you and also destroys the machine
- e.g. PTFE ("Teflon") - very very unhealthy!
- epoxy resins and materials bonded with epoxy resins
→ with some materials it is not clear whether it contains Cl or F. If you are not sure, don't cut or engrave it. If you notice any unusal coloration of the smoke or flame, stop the job immediately!
Materials that don't work
- Polycarbonate (PC)
- will smoke and turn black
- Flugzeugsperrholz
- too much glue - turns very black and does not cut well
- polystyrene ("Bastelglas")
- NOT the same as acrylic glass! Cuts weld themselves shut; harmful fumes to be expected
Possible Materials (Cutting/Engraving)
Check the material settings database to see if and how something has been cut before and please add your experience as well.
In addition, you can check the official list from [Epilog].
- wood
- plywood
- Kraftplex
- particle board/chip board
- MDF and HDF are also allowed but will make frequent lens cleaning necessary due to their high glue content
- acrylic glass/Plexiglass (→ not the cheap polystyrene/Bastlerglas from hardware stores, it welds itself shut after being cut)
- cast acrylic (GS/gegossen) - "chemically better"
- very suitable for engraving because the colour changes into a milky version of the original
- extruded acrylic (XT/extrudiert) - better thickness accuracy
- very suitable for cutting
- very suitable for parts that should fit together tightly
- not as suitable for engraving because there is no colour difference
- 3D engravable, though - the grooves can be filled with paint for a nice effect
- cast acrylic (GS/gegossen) - "chemically better"
- leather, but no artificial leathers if they contain chlorine!
- paper
- colored card
- discoloration when "engraving", looks nice
- cardboard
- rubber (special kind for stamps)
- foam
- fabric
- some polyurethanes depending on additives (see this study for some reference [p. 101])
When cutting wood or acrylic glass, a small flame may be observed at the focal point but is not necessarily a bad thing. However, if it burns too much or is still on when the laser beam is already somewhere else, immediately open the cover. Because the laser automatically shuts down, the fire should go out.
Possible Materials (Engraving Only)
- glass
- including mirrors (front or back!)
- metals
- only anodized aluminium and high quality stainless steel can be engraved directly
- for most metals you should use a special marking spray
- only works on blank metal, any coatings will not allow the molecular bond triggered by the laser's heat
Useful Links
see Category:Laser Cutting for many project ideas, tutorials & more!
Retailer's Information
HPC, the British company we got the laser cutter from, has some resources we should keep in mind:
