All public logs

Combined display of all available logs of CoMakingSpace Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 18:19, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried beech log.JPG (Project:Drying Timber beech log that had already been outside for about 6 months, shortly before getting sealed with paraffin (microwaved candle stumps & dripped from burning candle))
• 18:16, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried ash log.JPG (Project:Drying Timber ash log that had already been outside for about 6 months, shortly before getting sealed with paraffin (microwaved candle stumps & dripped from burning candle))
• 18:10, 6 March 2019 Lukas talk contribs uploaded File:Outdoor dried apple log.jpg (Project:Drying Timber an apple log that had already dried outside for a while shortly before being end-sealed with paraffin)
• 17:53, 6 March 2019 Lukas talk contribs uploaded File:Ash log paraffin treatment.JPG (Project:Drying Timber although this ash log may have been split too far already when Lukas found it, the ends were sealed with paraffin (candle stumps melted with a heat gun))
• 18:39, 5 March 2019 Lukas talk contribs uploaded File:Socket wrench storage.jpg (our socket wrenches and a selection of sockets on the wall)
• 18:35, 5 March 2019 Lukas talk contribs moved page Socket Wrench to Socket Wrenches
• 17:46, 5 March 2019 Lukas talk contribs uploaded File:TAC 24.JPG (Project:TAC finished 4-player board)
• 17:45, 5 March 2019 Lukas talk contribs uploaded File:TAC 23.JPG (Project:TAC for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD))
• 17:43, 5 March 2019 Lukas talk contribs uploaded File:TAC 22.JPG (Project:TAC ''Alleskleber'' was used to stick the felt to the board)
• 17:37, 5 March 2019 Lukas talk contribs uploaded File:TAC 21.JPG (Project:TAC the center of the 4-player board ("card pit"?) was covered in green felt for a nice look)
• 17:35, 5 March 2019 Lukas talk contribs uploaded File:TAC 20.JPG (Project:TAC cleaned up area of the 4-player board)
• 17:33, 5 March 2019 Lukas talk contribs uploaded File:TAC 19.JPG (Project:TAC partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood)
• 17:32, 5 March 2019 Lukas talk contribs uploaded File:TAC 18.JPG (Project:TAC since the 4-player board's hardwood fibers were easily cut by a knife, sanding and the resulting brightening of the ''Eukalyptus'' wood could be largely avoided during the cleanup process)
• 17:28, 5 March 2019 Lukas talk contribs uploaded File:TAC 17.JPG (Project:TAC finally, the 6-player board (spruce/fir) was finished with olive oil)
• 17:27, 5 March 2019 Lukas talk contribs uploaded File:TAC 16.JPG (Project:TAC completely sanded area of the 6-player board)
• 17:25, 5 March 2019 Lukas talk contribs uploaded File:TAC 15.JPG (Project:TAC the soft spruce/fir wood was best cleaned up with sandpaper after routing)
• 23:19, 4 March 2019 Lukas talk contribs uploaded File:TAC 14.JPG (Project:TAC chamfered edge of the 6-player board (before sanding))
• 23:16, 4 March 2019 Lukas talk contribs uploaded File:TAC 13.JPG (Project:TAC chamfering the edges of the 6-player board on the router table)
• 23:15, 4 March 2019 Lukas talk contribs uploaded File:TAC 12.JPG (Project:TAC a chamfer bit was used to finalize the edges of the 6-player board on the router table)
• 23:13, 4 March 2019 Lukas talk contribs uploaded File:TAC 11.JPG (Project:TAC 4-player board ready to leave the workshop with only minor steps left)
• 23:11, 4 March 2019 Lukas talk contribs uploaded File:TAC 10.JPG (Project:TAC after the outline was finished, the edges of the 4-player board were prettified with a roundover router bit)
• 23:06, 4 March 2019 Lukas talk contribs uploaded File:TAC 09.JPG (Project:TAC ...and trimmed to the partial-depth outline with a flush-cut router bit)
• 23:03, 4 March 2019 Lukas talk contribs uploaded File:TAC 08.JPG (Project:TAC since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw...)
• 23:00, 4 March 2019 Lukas talk contribs uploaded File:TAC 00.JPG (Project:TAC finished 6-player game in use :-))
• 22:46, 4 March 2019 Lukas talk contribs uploaded File:TAC 07.JPG (Project:TAC the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router)
• 22:43, 4 March 2019 Lukas talk contribs uploaded File:TAC 06.JPG (Project:TAC back to pictures of the 4-player game: undecorated version completely routed)
• 22:41, 4 March 2019 Lukas talk contribs uploaded File:TAC 05-2.JPG (Project:TAC we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time))
• 22:38, 4 March 2019 Lukas talk contribs uploaded File:TAC 05-1.JPG (Project:TAC partially routed 6-player board on the WorkBee)
• 22:35, 4 March 2019 Lukas talk contribs uploaded File:TAC 04.JPG (Project:TAC on to the full game - design in Fusion 360)
• 22:34, 4 March 2019 Lukas talk contribs uploaded File:TAC 03.JPG (Project:TAC (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!)
• 22:31, 4 March 2019 Lukas talk contribs uploaded File:TAC 02.JPG (Project:TAC design of a practive piece with all the needed shapes in Fusion 360)
• 22:30, 4 March 2019 Lukas talk contribs uploaded File:TAC 01.JPG (Project:TAC preparing to cut a practice piece from one of our stock boards)
• 22:47, 3 March 2019 Lukas talk contribs uploaded File:SKIL 7210.jpg ("SKIL 7210" sheet sander with some sanding marks on an old tabletop)
• 22:46, 3 March 2019 Lukas talk contribs uploaded File:Bosch PSS 250 AE.jpg ("Bosch PSS 250 AE" sheet sander with some sanding marks on an old tabletop)
• 15:53, 3 March 2019 Lukas talk contribs uploaded File:Scrolled Westeros.JPG (the "Game of Thrones" continent of Westeros cut out on the scroll saw - keep in mind that large shapes like this require spiral-toothed blades!)
• 15:39, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 5.JPG (how to clean circular saw blades, step 5: done! now try whether the blade cuts well again, otherwise please report it :-))
• 15:38, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 4.JPG (how to clean circular saw blades, step 4: clean the tooth faces with something narrow but stable, e.g. a thin strip of scrap wood)
• 15:36, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 3.JPG (how to clean circular saw blades, step 3: scrub off the gunk with the rough side of a sponge)
• 15:35, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 2.JPG (how to clean circular saw blades, step 2: let the blade soak in the water/cleaner solution for a while)
• 15:32, 3 March 2019 Lukas talk contribs uploaded File:Sawblade cleaning 1.JPG (how to clean circular saw blades, step 1: prepare an appropriate-sized container with (hot) water and cleaning agent)
• 23:21, 2 March 2019 Lukas talk contribs uploaded File:Birch tealights 12.JPG (Project:Tree Trunk Tealights further drying - important: insert the steel cups early so the logs shrink around them, not too far!)
• 23:19, 2 March 2019 Lukas talk contribs uploaded File:Birch tealights 11.JPG (Project:Tree Trunk Tealights after shaping, the ends were finished with coconut oil)
• 23:16, 2 March 2019 Lukas talk contribs uploaded File:Birch tealights 10.JPG (Project:Tree Trunk Tealights more drilling...so good to have a drill press available!)
• 23:08, 2 March 2019 Lukas talk contribs uploaded File:Birch tealights 09.JPG (Project:Tree Trunk Tealights after the logs finally seemed dry enough to stop supporting mold, holes could be drilled with a large Forstner bit)
• 11:45, 2 March 2019 User account MikeTym talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
• 18:35, 27 February 2019 User account Flop talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
• 17:53, 25 February 2019 User account Freewill talk contribs was created by Lukas talk contribs and password was sent by email (welcome!)
• 09:55, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 08.JPG (Project:Tree Trunk Tealights there was still a bit of new mold after all the efforts, but it was easily sanded off by hand on a clamped-down piece of sandpaper)
• 09:53, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 07.JPG (Project:Tree Trunk Tealights another week of drying on my CoMaking bench, this time more evenly spaced...)
• 09:49, 24 February 2019 Lukas talk contribs uploaded File:Birch tealights 06.JPG (Project:Tree Trunk Tealights applying some leftover hard wax oil to cover the cut faces against new mold formation)