Upload log
From CoMakingSpace Wiki
Below is a list of the most recent file uploads. See the gallery of new files for a more visual overview.
- 19:35, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-19.JPG (all that planing moved our {{Roubo-1}} around quite a bit and produced tons of shavings :-D)
- 19:32, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-18.JPG (after a lot of rather rough and unpleasant planing of our {{Roubo-1}}'s top, we thankfully got a jointer plane to finish it up)
- 19:29, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-17.JPG (diagonal stretchers were added to our {{Roubo-1}} to make it much more stable)
- 19:27, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-16.JPG (our {{Roubo-1}} finally standing on its own legs - time to plane the top some more!)
- 19:21, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-15.JPG (now it starts to look like something: all legs and the horizontal stretchers attached to our {{Roubo-1}})
- 19:13, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-14.JPG (test fitting one of our {{Roubo-1}}'s leg joints: the tenons of the leg (on the left) were covered in pencil so that the marks in the mortises show where the pieces currently get stuck and need some more work)
- 19:10, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-13.JPG (chiseling part of a leg joint into our {{Roubo-1}})
- 18:58, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-12.JPG (rough work for a tenon done by drilling with Forstner bits - now the chiseling may begin!)
- 18:55, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-11.JPG (Forstner bits are good for quick material removal prior to chiseling)
- 18:52, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-10.JPG (transferring the outlines of a leg joint's tenons in order to cut the corresponding mortises into the top of our {{Roubo-1}})
- 18:49, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-09.JPG (finished leg for our {{Roubo-1}})
- 18:46, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-08.JPG (Once you have a benchtop, you can already use it! Legs are overrated ;-) Category:Workbenhes)
- 18:43, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-07.JPG (chiseling a piece out of a leg joint on our Roubo-1)
- 18:38, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-06.JPG (preparing a leg joint for our {{Roubo-1}} with a Ryoba)
- 18:30, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-05.JPG ({{Roubo-1}} glue-up, part two: lacking larger F-clamps, clamping pressure had to be provided by some cargo straps (paint buckets as weights and clamps on some edges should minimize bending))
- 18:19, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-04.JPG (gluing up the top of our {{Roubo-1}} - the planks could not be jointed beforehand so three threaded rods were added as reinforcements)
- 18:15, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-03.JPG (simple jig for drilling horizontal holes into the planks that are going to make up the top of our {{Roubo-1}})
- 18:12, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-02.JPG (planks for our {{Roubo-1}}'s top laid out in their optimal arrangement for the first rough planing)
- 18:06, 2 January 2018 Lukas talk contribs uploaded File:Roubo workbench 1-01.JPG (Materials for our {{Roubo-1}}: ten 2000{{x}}80{{x}}60 mm and two 2000{{x}}100{{x}}80 mm spruce planks.)
- 10:24, 31 December 2017 Lukas talk contribs uploaded File:Very early woodshop.JPG (our wood workshop was used for all kinds of work (and storage) before we could build better options - so it never looked very tidy...)
- 10:20, 31 December 2017 Lukas talk contribs uploaded File:Kitchen installation.JPG (our kitchen, ready for the final installation steps)
- 10:17, 31 December 2017 Lukas talk contribs uploaded File:Removing old sink.JPG (a while after we removed an old sink, a bit of water still thought it would be funny to come splashing out of the wall...)
- 10:12, 31 December 2017 Lukas talk contribs uploaded File:Ceiling work.JPG (sometimes we need to get onto a ladder, e.g. to mount our projector or some extra outlets)
- 10:04, 31 December 2017 Lukas talk contribs uploaded File:E.Room after painting.JPG (freshly painted electronics room)
- 17:09, 29 December 2017 Lukas talk contribs uploaded File:Wall mounting panels.jpg (early on, we installed some large plywood or scrap wood panels on our walls for convenient mounting options (here in the CoMaking room))
- 17:00, 29 December 2017 Lukas talk contribs uploaded File:Large sheet cutting.JPG (Ed and Lukas preparing a large plywood sheet for the construction of our very first lockers)
- 10:39, 29 December 2017 Lukas talk contribs uploaded File:First tools 2.JPG (another carload of tools is being moved into our new Space in September 2017)
- 10:38, 29 December 2017 Lukas talk contribs uploaded File:First tools 1.JPG (the first carload of tools, just arrived on moving day in September 2017)
- 10:18, 29 December 2017 Lukas talk contribs uploaded File:Rapid EG212.JPG ("Rapid EG212" hot glue gun)
- 10:12, 28 December 2017 Lukas talk contribs uploaded File:Dremel 4000 with bits.JPG ("Dremel 4000" rotary tool and a box of rotary tool bits)
- 18:00, 27 December 2017 Lukas talk contribs uploaded File:Drilling table.JPG (drilling table in our wood workshop as of 2017-12-21)
- 17:52, 27 December 2017 Lukas talk contribs uploaded File:Wood workshop 2.JPG ((most of) our wood workshop as of 2017-12-21)
- 16:53, 27 December 2017 Lukas talk contribs uploaded File:Güde Drechselbank uninstalled.JPG ("Güde 1000" wood lathe just after arrival)
- 12:46, 26 December 2017 Lukas talk contribs uploaded File:Elu BM 11 E.jpg ("Elu BM 11 E" corded drill)
- 12:45, 26 December 2017 Lukas talk contribs uploaded File:Bosch GBM 10 RE.jpg ("Bosch GBM 10 RE" corded drill)
- 12:43, 26 December 2017 Lukas talk contribs uploaded File:SKIL 6365.jpg ("SKIL 6365" impact drill)
- 10:19, 26 December 2017 Lukas talk contribs uploaded File:Drills on the wall.JPG (An impact drill (top left), a rotary hammer (bottom left) and two "normal" electric drills (right) on the wall by our drilling table.)
- 10:07, 26 December 2017 Lukas talk contribs uploaded File:Steinel BHP 200-2.JPG ("Steinel BHP 200/2" heat gun)
- 03:24, 13 December 2017 Lukas talk contribs uploaded File:Key files.jpg (six key files on a [https://www.thingiverse.com/thing:801756 3D printed rack])
- 02:40, 13 December 2017 Lukas talk contribs uploaded File:Lathe restoration.JPG (our newly arrived Myford ML7 metalworking lathe on the repair table in late 2017)
- 20:02, 11 December 2017 Lukas talk contribs uploaded File:Pins,pins,pins.JPG (picture of a CPU (I think...))
- 18:09, 11 December 2017 Lukas talk contribs uploaded File:Drill repair.JPG (Patrick fixing a broken hammer drill with a wiring diagram from the internet)
- 19:15, 10 December 2017 Lukas talk contribs uploaded File:Einhell router.JPG (a router made by Einhell (not sure about the model no.))
- 20:24, 8 December 2017 Lukas talk contribs uploaded File:Cutting corners.JPG (table saw with freshly cut corner clamping jigs)
- 20:09, 8 December 2017 Lukas talk contribs uploaded File:Herkules KSZ 2100.JPG (small entry level chop saw)
- 19:44, 8 December 2017 Lukas talk contribs uploaded File:Herkules BHK 1600LE.JPG (entry level circular saw)
- 19:33, 8 December 2017 Lukas talk contribs uploaded File:Crosscut saw in action.JPG (using a crosscut saw to build a shelf for the office)
- 17:21, 6 December 2017 Lukas talk contribs uploaded File:Werkstattordnung.pdf (Unsere Werkstattordnung (Stand 22. Oktober 2017) ''Our workshop policies as of Oct 22, 2017)
- 17:06, 6 December 2017 Lukas talk contribs uploaded File:AGB.pdf (Unsere AGB (Stand 22. Oktober 2017) ''Our AGB as of Oct 22, 2017'')
- 17:36, 28 November 2017 Lukas talk contribs uploaded File:Vise family.jpg (a couple of bench vises and a woodworking vise before they found their home on various workbenches (tweeted by @comakingspace on 2017-11-05 - [https://twitter.com/comakingspace/status/927154888777388032 link]))
