Clamps: Difference between revisions
(added photo of clamp cart) |
(+ Lever Clamps) |
||
| (15 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:clamp cart.JPG|thumb|right|200px|"clamp cart" with racks on the side and a box for smaller clamps at the bottom]] | [[File:clamp cart.JPG|thumb|right|200px|"clamp cart" with racks on the side and a box for smaller clamps at the bottom]] | ||
Clamps are accessory tools to hold workpieces together, e.g. for pressing a [[Material:Wood Glue|wood glue]] joint, or in a fixed position, e.g. on top of a workbench. They usually consist of two jaws, of which one may be fixed and at least one is adjustable. | Clamps are accessory tools to hold workpieces together, e.g. for pressing a [[Material:Wood Glue|wood glue]] joint, or in a fixed position, e.g. on top of a workbench. They usually consist of two jaws, of which one may be fixed and at least one is adjustable. [[Vises]] can be very similar (depending on your use case). | ||
You can never have enough clamps! Whenever you need more or bigger ones for a project, buy some... | You can never have enough clamps! Whenever you need more or bigger ones for a project, buy some... | ||
| Line 11: | Line 11: | ||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=F-Clamps | |tool name=F-Clamps | ||
|german=Zwingen | |||
|image=F-clamp.JPG | |image=F-clamp.JPG | ||
|synonyms=bar clamps, speed clamps;<br>DE: Schraubzwingen,<br>Schraubknechte | |synonyms=bar clamps, speed clamps;<br>DE: Schraubzwingen,<br>Schraubknechte | ||
|type=fastening tool | |type=fastening tool | ||
|access= | |access=read this section | ||
|location=[[Wood Workshop|wood workshop]] | |location=clamp cart ([[Location::Wood Workshop|wood workshop]]) | ||
|material=e.g. [[wood]], [[metal]] | |material=e.g. [[wood]], [[metal]] | ||
|used with=[[Corner Clamping Jigs|corner clamping jigs]] | |used with=[[Corner Clamping Jigs|corner clamping jigs]] | ||
|similar=[[Cam Clamps|cam clamps]] | |||
}} | }} | ||
F-clamps consist of a fixed jaw at the end of a steel bar and an slideable jaw with a pressure point that is adjusted by means of a large screw. | F-clamps consist of a fixed jaw at the end of a steel bar and an slideable jaw with a pressure point that is adjusted by means of a large screw. | ||
We have several malleable iron ( | We have several malleable iron (''Temperguss'') F-clamps spanning up to 2.1 m in the [[Wood Workshop|wood workshop]]. | ||
[[File:long-term clamping.JPG|left|150 px]] Clamps are a temporary solution by design and are not made to withstand weather, for instance. | [[File:long-term clamping.JPG|left|150 px]] Clamps are a temporary solution by design and are not made to withstand weather, for instance. | ||
<br clear=all> | |||
== Lever Clamps == | |||
{{ToolInfoBox | |||
|tool name= Lever Clamps | |||
|image=lever clamp.jpg | |||
|synonyms=DE: Hebelzwingen | |||
|type=fastening tool | |||
|access=read this section | |||
|location=clamp cart ([[Location::Wood Workshop|wood workshop]]) & [[Table Saw|table saw]] | |||
|used with=[[T Tracks|T tracks]]; [[Table Saw|table saw]] (sliding table) | |||
|extrabox=yes | |||
}} | |||
Lever clamps have a low profile, are often compatible with [[T Tracks|T tracks]] and are less vulnerable to vibrations than screw-based clamps, making them a good choice for applications in [[jigs]]. | |||
<br clear=all> | <br clear=all> | ||
| Line 34: | Line 50: | ||
|synonyms=DE: Einhandzwingen, "Pumpzwingen" | |synonyms=DE: Einhandzwingen, "Pumpzwingen" | ||
|type=fastening tool | |type=fastening tool | ||
|access= | |access=read this section | ||
|location=[[Wood Workshop|wood workshop]] | |location=clamp cart ([[Location::Wood Workshop|wood workshop]]) | ||
|material=e.g. [[wood]], [[metal]] | |material=e.g. [[wood]], [[metal]] | ||
|extrabox=yes | |||
}} | }} | ||
These black one-handed clamps work in a similar fashion to a [[Caulking Gun|caulking gun]] where you "pump" to get the desired pressure. | |||
* 70 × 100 mm (5) | * 70 × 100 mm (5) | ||
| Line 48: | Line 65: | ||
|tool name=Spring Clamps | |tool name=Spring Clamps | ||
|image=spring clamp.JPG | |image=spring clamp.JPG | ||
|synonyms=A-clamps, "flexible clamps";<br>DE: Leimzwingen, Federzwingen | |synonyms=A-clamps, "flexible clamps", muslin clamps;<br>DE: Leimzwingen, Federzwingen, Musselin-Klemmen | ||
|type=fastening tool | |type=fastening tool | ||
|access= | |access=read this section | ||
|location=[[Wood Workshop|wood workshop]] | |location=clamp cart ([[Location::Wood Workshop|wood workshop]]) | ||
|material=e.g. [[wood]], [[cardboard]] | |material=e.g. [[wood]], [[cardboard]] | ||
|extrabox=yes | |||
}} | }} | ||
We have a few small plastic or metal spring clamps. These are commonly used for thin glue-ups, hence their German name "''Leimzwingen''". | We have a few small plastic or metal spring clamps. These are commonly used for thin glue-ups, hence their German name "''Leimzwingen''". | ||
| Line 59: | Line 77: | ||
<br clear=all> | <br clear=all> | ||
== | == Cam Clamps == | ||
{{ToolInfoBox | |||
|tool name=Cam Clamps | |||
|image=cam clamp glue-up.JPG | |||
|synonyms=luthier clamps; DE: Klemmzwingen,<br>Holzzwingen, Klemmsia-Zwingen | |||
|type=fastening tool | |||
|access=read this section | |||
|location=clamp cart ([[Location::Wood Workshop|wood workshop]]) | |||
|material=[[wood]] | |||
|similar=[[F-Clamps|F-clamps]] | |||
|used with=[[Masking Tape|masking tape]] | |||
|extrabox=yes | |||
}} | |||
[[File:cam clamps with masking tape.JPG|thumb|left|To avoid [[Wood Glue|gluing]] your workpiece to a cam clamp, stick a bit of [[Masking Tape|masking tape]] over the clamp jaws!]] | |||
Wooden cam clamps exert less pressure than metal [[F-Clamps|F-clamps]], but enough for most glue jobs. Due to this property and their ease of placement they are often used on delicate workpieces, such as instruments or fine furniture. | |||
They are tightened by turning a cam lever in the sliding jaw. The jaws are lined with [[Material:Cork|cork]] pads to avoid damaging the workpiece. '''Caution: [[Wood Glue|wood glue]] sticks to cork and the wooden clamp jaws!''' | |||
There are currently four cam clamps (approx. 40 cm) on the clamp cart. If you need more, it's not too difficult to [http://www.instructables.com/id/DIY-Woodworking-Cam-Clamps-Plans/ make some cam clamps yourself]. | |||
Further reading: e.g. [https://de.wikipedia.org/wiki/Klemmzwinge Wikipedia (DE)]. There are also [http://www.holzwerken.net/Wissen/News/Klassiker-mit-neuer-Aufgabe bench hooks based on this clamp design] now. | |||
<br clear=all> | |||
== Corner Clamps == | |||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=Corner Clamps | |tool name=Corner Clamps | ||
|image=corner clamps.JPG | |image=corner clamps.JPG | ||
|synonyms=DE: Winkelspanner, Eckzwingen, "Winkelzwingen" | |synonyms=right angle clamps, right angle vise, picture-frame clamps;<br>DE: Winkelspanner, Eckzwingen, "Winkelzwingen" | ||
|type=fastening tool | |type=fastening tool | ||
|access= | |access=read this section | ||
|location=[[Wood Workshop|wood workshop]] | |location=clamp cart ([[Location::Wood Workshop|wood workshop]]) | ||
|material=e.g. [[wood]], [[cardboard]] | |material=e.g. [[wood]], [[cardboard]] | ||
|similar=[[Corner Clamping Jigs|corner clamping jigs]] | |similar=[[Corner Clamping Jigs|corner clamping jigs]] | ||
|extrabox=yes | |||
}} | }} | ||
These 3D printed corner clamps are based on a [http://www.thingiverse.com/thing:713236 Thingiverse design] and are especially useful for gluing boxes. Making these is a good use for some short M8 [[Threaded Rods|threaded rods]] you may have lying around! | These [[3DP|3D printed]] corner clamps are based on a [http://www.thingiverse.com/thing:713236 Thingiverse design] and are especially useful for gluing boxes. Making these is a good use for some short M8 [[Threaded Rods|threaded rods]] you may have lying around! [[Category:Self-Made Tools]] | ||
Parts you want to clamp with these must be oriented at a right angle, but can be of different thicknesses as the inside corner is slidable. | Parts you want to clamp with these must be oriented at a right angle, but can be of different thicknesses as the inside corner is slidable. | ||
We've made two 30 | We've made two 30{{x}}40 mm clamps - for bigger pieces, you may want to try [[Corner Clamping Jigs|corner clamping jigs]]. | ||
Besides these small self-made ones, we also got some ''(3?)'' medium-sized [https://www.bessey.de/de-DE/BESSEY-Tool/Produkte/Spannwerkzeuge/Winkel--und-Gehrungsspanner/Winkelspanner-WS3-WS6 Bessey WS3] from a friendly carpenter. | |||
[[File:Bessey Winkelspanner.jpg|thumb|left|two of the Bessey clamps in use to assemble a simple cabinet]] | |||
[[Category:Repair]] | |||
[[Category:Woodworking]] | |||
Latest revision as of 20:04, 8 June 2024
Clamps are accessory tools to hold workpieces together, e.g. for pressing a wood glue joint, or in a fixed position, e.g. on top of a workbench. They usually consist of two jaws, of which one may be fixed and at least one is adjustable. Vises can be very similar (depending on your use case).
You can never have enough clamps! Whenever you need more or bigger ones for a project, buy some...
The CoMakingSpace's clamp selection can be found on the clamp cart in the wood workshop.
F-Clamps
| ToolInfoBox F-Clamps | |
|---|---|
| |
| Synonyms: | bar clamps, speed clamps; DE: Schraubzwingen, Schraubknechte |
| Type: | fastening tool |
| Material: | e.g. wood, metal |
| Used with: | corner clamping jigs |
| Location: | clamp cart (wood workshop) |
| Access Requirements: | read this section |
| Similar (More or Less): | cam clamps |
F-clamps consist of a fixed jaw at the end of a steel bar and an slideable jaw with a pressure point that is adjusted by means of a large screw.
We have several malleable iron (Temperguss) F-clamps spanning up to 2.1 m in the wood workshop.
Clamps are a temporary solution by design and are not made to withstand weather, for instance.
Lever Clamps
| ToolInfoBox Lever Clamps | |
|---|---|
| |
| Synonyms: | DE: Hebelzwingen |
| Type: | fastening tool |
| Used with: | T tracks; table saw (sliding table) |
| Location: | clamp cart (wood workshop) & table saw |
| Access Requirements: | read this section |
Lever clamps have a low profile, are often compatible with T tracks and are less vulnerable to vibrations than screw-based clamps, making them a good choice for applications in jigs.
One-Handed Clamps
| ToolInfoBox One-Handed Clamps | |
|---|---|
| |
| Synonyms: | DE: Einhandzwingen, "Pumpzwingen" |
| Type: | fastening tool |
| Material: | e.g. wood, metal |
| Location: | clamp cart (wood workshop) |
| Access Requirements: | read this section |
These black one-handed clamps work in a similar fashion to a caulking gun where you "pump" to get the desired pressure.
- 70 × 100 mm (5)
- 40 × 50 mm (4)
Spring Clamps
| ToolInfoBox Spring Clamps | |
|---|---|
| |
| Synonyms: | A-clamps, "flexible clamps", muslin clamps; DE: Leimzwingen, Federzwingen, Musselin-Klemmen |
| Type: | fastening tool |
| Material: | e.g. wood, cardboard |
| Location: | clamp cart (wood workshop) |
| Access Requirements: | read this section |
We have a few small plastic or metal spring clamps. These are commonly used for thin glue-ups, hence their German name "Leimzwingen".
Cam Clamps
| ToolInfoBox Cam Clamps | |
|---|---|
| |
| Synonyms: | luthier clamps; DE: Klemmzwingen, Holzzwingen, Klemmsia-Zwingen |
| Type: | fastening tool |
| Material: | wood |
| Used with: | masking tape |
| Location: | clamp cart (wood workshop) |
| Access Requirements: | read this section |
| Similar (More or Less): | F-clamps |
Wooden cam clamps exert less pressure than metal F-clamps, but enough for most glue jobs. Due to this property and their ease of placement they are often used on delicate workpieces, such as instruments or fine furniture.
They are tightened by turning a cam lever in the sliding jaw. The jaws are lined with cork pads to avoid damaging the workpiece. Caution: wood glue sticks to cork and the wooden clamp jaws!
There are currently four cam clamps (approx. 40 cm) on the clamp cart. If you need more, it's not too difficult to make some cam clamps yourself.
Further reading: e.g. Wikipedia (DE). There are also bench hooks based on this clamp design now.
Corner Clamps
| ToolInfoBox Corner Clamps | |
|---|---|
| |
| Synonyms: | right angle clamps, right angle vise, picture-frame clamps; DE: Winkelspanner, Eckzwingen, "Winkelzwingen" |
| Type: | fastening tool |
| Material: | e.g. wood, cardboard |
| Location: | clamp cart (wood workshop) |
| Access Requirements: | read this section |
| Similar (More or Less): | corner clamping jigs |
These 3D printed corner clamps are based on a Thingiverse design and are especially useful for gluing boxes. Making these is a good use for some short M8 threaded rods you may have lying around!
Parts you want to clamp with these must be oriented at a right angle, but can be of different thicknesses as the inside corner is slidable.
We've made two 30 × 40 mm clamps - for bigger pieces, you may want to try corner clamping jigs.
Besides these small self-made ones, we also got some (3?) medium-sized Bessey WS3 from a friendly carpenter.
