Electronics Room

From CoMakingSpace Wiki

Revision as of 22:01, 3 May 2024 by Lukas (talk | contribs) (photo size)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

A panorama of the electronics room
E-Room panorama


Our electronics room hosts all our tools and machines needed to build projects including some electronics. As an addition, it hosts precision machines such as our Laser Cutter and our 3D Printers.

Machines

Other Tools and Accessories


Tools

Tools are for you to use them. However, everything mentioned in here is not intended to be used permanently in your projects!

  • iFixit Pro Tech Toolkit
    • The toolkit consists of a set of screwdriver and bits as well as various kinds of tools to take apart devices. Even though the bit set has an adapter to 1/4 inch bits don't use them in a cordless drill. The exact components can be found on the iFixit website.
  • 4mm Banana equipment/cables
    • 10x 1m 1mm2 cables
    • 4x aligator clips small
    • 2x aligator clips large
    • 2x needle probes
    • 2x small cable clamps
  • side cutters
    • "Knips" Knippex - Currently missing
    • cheaper ones (yellow) for the "dirty work"
    • 140mm larger ones
  • Wire strippers
    • min 0.2mm2

Development Board

Consumables

We have various things available, which you might need for some of your projects. In case you find some of these missing, please contact a manager, the responsible Area Patron and/or add {{refill}} into the status column below:

Resistors

The Resistors mentioned in this table will get restocked when they are empty:

Value Location Suggested Donation Status
1 Ω small parts storage 2 ct available
10 Ω small parts storage 2 ct available
100 Ω small parts storage 2 ct available
1k Ω small parts storage 2 ct available
10k Ω small parts storage 2 ct available
100k Ω small parts storage 2 ct available
1M Ω small parts storage 2 ct available
10M Ω small parts storage 2 ct available

Other

The Consumables mentioned in this table will get restocked when they are empty:

Consumable Location Suggested Donation Status
Jumper Cable - M-M E-Bench, right side, 5th drawer (2nd from below) 2 ct available
Jumper Cable - F-M E-Bench, right side, 5th drawer (2nd from below) 2 ct available
Jumper Cable - F-F E-Bench, right side, 5th drawer (2nd from below) 2 ct available

Other things should be available, but will not be restocked if they are empty. Please update the table if you find them empty:

Consumable Location Suggested Donation Status
DC-DC Power Converter available