File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 17:02, 4 November 2018 | Projector mount.JPG (file) |  |
348 KB | Lukas (talk | contribs) | ceiling mount for our projector, inspired by [https://makezine.com/projects/build-six-axis-positioning-platform-stuff-can-buy-hardware-store/ a Makezine project]] | 1 |
| 16:58, 4 November 2018 | Spatulas.JPG (file) |  |
288 KB | Lukas (talk | contribs) | spatulas on the wood workshop wall | 1 |
| 16:50, 4 November 2018 | Timber on bandsaw.JPG (file) |  |
511 KB | Lukas (talk | contribs) | large bandsaws can easily cut through quite large pieces, such as this part of a log | 1 |
| 16:43, 4 November 2018 | Holzdübel.JPG (file) |  |
436 KB | Lukas (talk | contribs) | selection of dowel pegs in our wood workshop | 1 |
| 11:03, 4 November 2018 | Flip dot clock.JPG (file) |  |
631 KB | Lukas (talk | contribs) | our flip dot display acting as a clock | 1 |
| 11:00, 4 November 2018 | Cheap woodturning tools.JPG (file) |  |
297 KB | Lukas (talk | contribs) | better lighting; tools in their holder | 2 |
| 09:06, 4 November 2018 | Slowmo jigsaw.gif (file) |  |
2.98 MB | Luzian (talk | contribs) | Smaller, shorter and corped | 3 |
| 13:49, 2 November 2018 | Bandsaw guide position - side view.png (file) |  |
1.01 MB | Lukas (talk | contribs) | explanation integrated into picture | 2 |
| 12:49, 2 November 2018 | Bandsaw teeth position on flat wheels.JPG (file) |  |
433 KB | Lukas (talk | contribs) | Contrary to what it often says in the manual, a bandsaw blade should '''not''' always be tracking centrally on its wheel. The teeth should extend over the edge of '''flat''' wheels, so they don't loose their set ''(Schränkung)'' beca... | 1 |
| 12:39, 2 November 2018 | Wiki media creation.JPG (file) |  |
338 KB | Lukas (talk | contribs) | two members creating media for our page on jigsaws | 1 |
| 02:27, 1 November 2018 | NerfWeaponsStand.JPG (file) |  |
2.44 MB | LokowandtG (talk | contribs) | Overview of finished project | 1 |
| 23:55, 31 October 2018 | Leimbinder.JPG (file) |  |
286 KB | Lukas (talk | contribs) | a beam of glued laminated timber in a hardware store | 1 |
| 17:35, 31 October 2018 | VHS couch table legs finished.JPG (file) |  |
340 KB | Lukas (talk | contribs) | 4:3 aspect ratio for Main Page/Slideshow | 2 |
| 13:00, 31 October 2018 | Make bs.jpg (file) |  |
80 KB | Blacksheep (talk | contribs) | 1 | |
| 04:08, 30 October 2018 | QC3-LED-driver PCB.jpeg (file) |  |
1.61 MB | Pakue (talk | contribs) | Project:QC3 LED driver | 1 |
| 23:32, 29 October 2018 | ClearTape.jpg (file) |  |
739 KB | NitramLegov (talk | contribs) | 1 | |
| 22:26, 29 October 2018 | ProjectDeWalt Battery Replacement 1.jpg (file) |  |
1.87 MB | Johannes (talk | contribs) | 2 | |
| 22:25, 29 October 2018 | ProjectDeWalt Battery Replacement 3.jpg (file) |  |
2.37 MB | Johannes (talk | contribs) | 2 | |
| 22:04, 29 October 2018 | ProjectDeWalt Battery Replacement 0.jpg (file) |  |
2.8 MB | Johannes (talk | contribs) | 1 | |
| 22:01, 29 October 2018 | ProjectDeWalt Battery Replacement 2.jpg (file) |  |
2.94 MB | Johannes (talk | contribs) | 1 | |
| 18:34, 27 October 2018 | Router table feed direction animation.GIF (file) |  |
222 KB | Lukas (talk | contribs) | low resolution - should allow animated thumbnails | 2 |
| 22:11, 25 October 2018 | Push block use.JPG (file) |  |
450 KB | Lukas (talk | contribs) | (fake) use of push blocks - press down firmly with both hands, but perhaps insert a bit for better routing results ;-) | 1 |
| 22:03, 25 October 2018 | Making push blocks.JPG (file) |  |
431 KB | Lukas (talk | contribs) | gluing handles into a pair of push blocks, utilizing the offcuts to obtain an even clamping surface | 1 |
| 21:50, 25 October 2018 | Push blocks.JPG (file) |  |
386 KB | Lukas (talk | contribs) | two self-made push blocks to use with dangerous tools such as a router table, jointer or table saw | 1 |
| 16:33, 25 October 2018 | DeWalt DC740KA.jpg (file) |  |
1.46 MB | Johannes (talk | contribs) | 1 | |
| 22:02, 23 October 2018 | Digital file shredder-4.JPG (file) |  |
426 KB | Lukas (talk | contribs) | finished digital file shredder - clearly a desktop accessory that every Maker needs! | 1 |
| 22:00, 23 October 2018 | Digital file shredder-3.JPG (file) |  |
386 KB | Lukas (talk | contribs) | main case & inner works of the digital file shredder completed; power supply and baseplate still missing | 1 |
| 21:58, 23 October 2018 | Digital file shredder-2.JPG (file) |  |
543 KB | Lukas (talk | contribs) | most of the components for the digital file shredder are embedded into a 3D printed case after pausing the print at the appropriate time | 1 |
| 21:53, 23 October 2018 | Digital file shredder-1.JPG (file) |  |
453 KB | Lukas (talk | contribs) | rough assembly of the electronics for a small "file shredder" that formats SD cards! | 1 |
| 21:48, 23 October 2018 | Digital file shredder-0.JPG (file) |  |
279 KB | Lukas (talk | contribs) | a small "file shredder" that formats SD cards! | 1 |
| 20:20, 23 October 2018 | Screenshot - Inkscape.PNG (file) |  |
192 KB | Lukas (talk | contribs) | screenshot of a typical Inkscape project (in this case: drawing wiki illustrations of woodturning tools) | 1 |
| 17:34, 23 October 2018 | Router table feed direction.png (file) |  |
14 KB | Lukas (talk | contribs) | Basic schematic of the proper feed direction on a router table, resulting in safe climb cuts whichever side of the bit you are working on. Drawn in Inkscape, also see animated version: [[:File:Router table feed direction animation... | 1 |
| 19:57, 22 October 2018 | ChickenDoor 01.jpg (file) |  |
160 KB | NitramLegov (talk | contribs) | 1 | |
| 17:44, 22 October 2018 | Westfalia router table off center.JPG (file) |  |
501 KB | Lukas (talk | contribs) | When we got the Westfalia router table, the router was mounted too far to the front so the bit would be off center - not that the scale on this simple table would have been too accurate anyway, but something we will fix nevertheless! | 1 |
| 17:41, 22 October 2018 | Westfalia router table fence-top.JPG (file) |  |
475 KB | Lukas (talk | contribs) | In addition to the fence, you should use additional guides on the router table whenever you can - shown here is a rigid top guide ''almost'' touching the workpiece, featherboards can actually press on it and are even safer! | 1 |
| 17:37, 22 October 2018 | Westfalia router table fence-X.JPG (file) |  |
478 KB | Lukas (talk | contribs) | The screw knob marked "X" should be left alone unless you really need it - it lets you move the left part of the fence back and forward on its own; for the majority of jobs on the router table (if not all) you want the fence to be perf... | 1 |
| 17:31, 22 October 2018 | Westfalia router table dust ports.JPG (file) |  |
441 KB | Lukas (talk | contribs) | there are two places where you can connect a shop vac to the Westfalia router table: top (green) - most useful for edge work - or bottom (black) - most useful for grooves | 1 |
| 17:12, 21 October 2018 | MusicStation 06.jpg (file) |  |
1.19 MB | NitramLegov (talk | contribs) | 2 | |
| 16:53, 21 October 2018 | MusicStation 11.jpg (file) |  |
79 KB | NitramLegov (talk | contribs) | 1 | |
| 16:49, 21 October 2018 | MusicStation 01.jpg (file) |  |
248 KB | NitramLegov (talk | contribs) | 1 | |
| 16:48, 21 October 2018 | MusicStation 08.jpg (file) |  |
4.69 MB | NitramLegov (talk | contribs) | 1 | |
| 16:48, 21 October 2018 | MusicStation 10.jpg (file) |  |
92 KB | NitramLegov (talk | contribs) | 1 | |
| 16:48, 21 October 2018 | MusicStation 07.jpg (file) |  |
4.18 MB | NitramLegov (talk | contribs) | 1 | |
| 16:48, 21 October 2018 | MusicStation 09.jpg (file) |  |
79 KB | NitramLegov (talk | contribs) | 1 | |
| 16:47, 21 October 2018 | MusicStation 05.jpg (file) |  |
4.23 MB | NitramLegov (talk | contribs) | 1 | |
| 16:47, 21 October 2018 | MusicStation 04.jpg (file) |  |
4.91 MB | NitramLegov (talk | contribs) | 1 | |
| 16:47, 21 October 2018 | MusicStation 03.jpg (file) |  |
5.09 MB | NitramLegov (talk | contribs) | 1 | |
| 16:46, 21 October 2018 | MusicStation 02.jpg (file) |  |
4.89 MB | NitramLegov (talk | contribs) | 1 | |
| 09:42, 18 October 2018 | Oscillating Tool Vac Adapter.jpg (file) |  |
1.01 MB | NitramLegov (talk | contribs) | 1 | |
| 09:41, 18 October 2018 | Holzmann D460F.jpg (file) |  |
1.69 MB | NitramLegov (talk | contribs) | 1 |
