File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 20:07, 12 February 2018 | Skew chisel.JPG (file) |  |
571 KB | Lukas (talk | contribs) | skew chisel for woodturning | 1 |
| 19:59, 12 February 2018 | Parting tools.jpg (file) |  |
158 KB | Lukas (talk | contribs) | cutting edges of two different woodturning parting tools | 1 |
| 18:53, 12 February 2018 | Makita HR2440.JPG (file) |  |
231 KB | Lukas (talk | contribs) | "Makita HR2440" rotary hammer | 1 |
| 18:38, 12 February 2018 | 3DP donation box.JPG (file) |  |
466 KB | Lukas (talk | contribs) | donation box for our 3D printing materials | 1 |
| 18:03, 12 February 2018 | Intentionally crooked nails.JPG (file) |  |
264 KB | Lukas (talk | contribs) | nails might slide out of the wood under load - drive them in at different angles to reduce that risk! | 1 |
| 17:50, 12 February 2018 | Clamp cart.JPG (file) |  |
276 KB | Lukas (talk | contribs) | cart holding various kinds of clamps on its side racks and a box at the bottom | 1 |
| 20:05, 11 February 2018 | Wood workshop donation box.JPG (file) |  |
216 KB | Lukas (talk | contribs) | the box for material donations in the wood workshop | 1 |
| 19:46, 11 February 2018 | Foam extinguisher.JPG (file) |  |
351 KB | Lukas (talk | contribs) | a fire extinguisher filled with foam | 1 |
| 19:30, 11 February 2018 | Wrench for leverage.jpg (file) |  |
392 KB | Lukas (talk | contribs) | combination wrenches are not only useful when you need to turn hex-head nuts and bolts, but also in some cases where you simple need a longer lever for sufficient turning force (here to break free a rusty thread in an... | 1 |
| 19:12, 8 February 2018 | Letter punch test.JPG (file) |  |
388 KB | Lukas (talk | contribs) | "HELLO WORLD" punched into a piece of sheet metal with letter punches | 1 |
| 18:53, 8 February 2018 | Bench vises.jpg (file) |  |
228 KB | Lukas (talk | contribs) | some bench vises in the wood workshop (not in their usual arrangement of course) | 1 |
| 18:45, 8 February 2018 | Machine vises.JPG (file) |  |
390 KB | Lukas (talk | contribs) | two machine vises hanging on the wall | 1 |
| 16:06, 27 January 2018 | Magnetic Knife Holder Done.jpg (file) |  |
1.52 MB | Pakue (talk | contribs) | Finished Project: Magnetic Knife Holder. | 1 |
| 16:03, 27 January 2018 | Magnetic Knife Holder Applied Epoxy.jpg (file) |  |
1.47 MB | Pakue (talk | contribs) | Applying epoxy. Project:Magnetic Knife Holder | 1 |
| 15:59, 27 January 2018 | Magnetic Knife Holder Mixing Epoxy.jpg (file) |  |
1.84 MB | Pakue (talk | contribs) | Mixing the epoxy for securing the magnets. Project: Magnetic Knife Holder | 1 |
| 15:56, 27 January 2018 | Magnetic Knife Holder Inserted Magnets.jpg (file) |  |
1.29 MB | Pakue (talk | contribs) | Inserted magnets. Note they are slightly recessed. Project: Magnetic Knife Holder | 1 |
| 15:53, 27 January 2018 | Magnetic Knife Holder Inserting Magnets.jpg (file) |  |
2.4 MB | Pakue (talk | contribs) | Inserting the magnets into the the drilled holes. Magnetic Knife Holder | 1 |
| 15:51, 27 January 2018 | Magnetic Knife Holder Drilling.jpg (file) |  |
1.7 MB | Pakue (talk | contribs) | Drilling. Magnetic Knife Holder | 1 |
| 15:49, 27 January 2018 | Magnetic Knife Holder Marking.jpg (file) |  |
1.83 MB | Pakue (talk | contribs) | Marking the drilling spots for the magnets. Magnetic Knife Holder | 1 |
| 23:31, 24 January 2018 | Wooden piece 3d engrave.jpg (file) |  |
1.15 MB | Fabian (talk | contribs) | finished project: 3d engraved photo and engraved text | 1 |
| 23:22, 24 January 2018 | Lathe Oil Nipples.png (file) |  |
2.17 MB | Pakue (talk | contribs) | added missing image from inside the gearbox. | 2 |
| 23:20, 24 January 2018 | HDMI adapter.JPG (file) |  |
348 KB | Lukas (talk | contribs) | VGA to HDMI adapter to connect our projector to computers without VGA output | 1 |
| 22:52, 24 January 2018 | Laser 3d engraved Photo.jpg (file) |  |
1.97 MB | Fabian (talk | contribs) | Using 3d engrave it is possible to engrave photos into all kinds of wood | 1 |
| 23:19, 22 January 2018 | Grease gun.JPG (file) |  |
224 KB | Lukas (talk | contribs) | grease gun to lubricate machines such as our metal lathe through oil nipples | 1 |
| 14:53, 21 January 2018 | Stack of glass.jpg (file) |  |
362 KB | Lukas (talk | contribs) | a stack of clear glass panels, topped with a reflection of some brown glass bottles in a glass shard | 1 |
| 14:46, 21 January 2018 | Number & letter punches.JPG (file) |  |
336 KB | Lukas (talk | contribs) | number & letter punches for marking metals and other malleable materials | 1 |
| 14:43, 21 January 2018 | Face shield.JPG (file) |  |
295 KB | Lukas (talk | contribs) | Face shield as used with the wood lathe or disc grinders, for instance. | 1 |
| 03:02, 12 January 2018 | Fusion360 ComakingSpace Logo.png (file) |  |
296 KB | Pakue (talk | contribs) | The logo of the CoMakingSpace in Fusion 360 | 1 |
| 08:03, 10 January 2018 | Map of CoMS.png (file) |  |
326 KB | Pakue (talk | contribs) | Map of the CoMakingSpace relative to the main train station. | 1 |
| 08:01, 10 January 2018 | Artboard 3.png (file) |  |
326 KB | Pakue (talk | contribs) | Map of the CoMakingSpace relative to the main train station. | 1 |
| 21:19, 9 January 2018 | Circular saw guide build 5.JPG (file) |  |
380 KB | Lukas (talk | contribs) | Self-made circular saw guide in use with the Herkules BHK 1600LE circular saw | 1 |
| 21:16, 9 January 2018 | Circular saw guide build 4.JPG (file) |  |
334 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 4 (optional): mark the different areas of the jig - where will the saw go, where can you place clamps? | 1 |
| 21:13, 9 January 2018 | Circular saw guide build 3.JPG (file) |  |
396 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 3: cut off the excess plywood with the '''exact saw you intend to use with the jig''' | 1 |
| 21:09, 9 January 2018 | Circular saw guide build 2.JPG (file) |  |
384 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 2: apply pressure to the glue-up where clamps don't reach by putting heavy stuff on top! | 1 |
| 21:07, 9 January 2018 | Circular saw guide build 1.JPG (file) |  |
334 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 1: glue a straight board onto a piece of plywood. | 1 |
| 02:54, 6 January 2018 | Blast cabinet open.JPG (file) |  |
340 KB | Lukas (talk | contribs) | blast cabinet with its lid propped open | 1 |
| 17:55, 5 January 2018 | Screw head hex cap.PNG (file) |  |
4 KB | Lukas (talk | contribs) | icon of a hex cap screw head (screenshot of a Tinkercad model) | 1 |
| 18:39, 4 January 2018 | Embedded bottle finished.jpg (file) |  |
1.62 MB | Pakue (talk | contribs) | 1 | |
| 18:36, 4 January 2018 | Embedded bottle sanding.jpg (file) |  |
2.21 MB | Pakue (talk | contribs) | Sanding of the embedded bottle. | 1 |
| 18:33, 4 January 2018 | Embedded Object rasp.jpg (file) |  |
2.05 MB | Pakue (talk | contribs) | An embedded 3D print in resin. Rough shaping with a rasp. | 1 |
| 18:31, 4 January 2018 | Bottle Embedding Mould.jpg (file) |  |
1.41 MB | Pakue (talk | contribs) | Partially embedded bottle inside mould with wood pieces to keep it in place. | 1 |
| 18:29, 4 January 2018 | Resin pouring workspace.jpg (file) |  |
2.24 MB | Pakue (talk | contribs) | Workspace for resin pouring. | 1 |
| 18:25, 4 January 2018 | Embedded Campari.jpg (file) |  |
1.36 MB | Pakue (talk | contribs) | An embedded bottle of Campari in polyester resin. | 1 |
| 20:39, 3 January 2018 | Workbee frame.JPG (file) |  |
373 KB | Lukas (talk | contribs) | the assembled frame of our "Workbee" CNC router | 1 |
| 21:18, 2 January 2018 | Roubo workbench 1-24.JPG (file) |  |
418 KB | Lukas (talk | contribs) | our {{Roubo-1}} with all major steps finished - looks like a bench, works like a bench, and was a ton of fun to build! | 1 |
| 20:55, 2 January 2018 | Roubo workbench 1-23.JPG (file) |  |
418 KB | Lukas (talk | contribs) | an old slatted frame (''Lattenrost'') was added to our {{Roubo-1}} as a storage level | 1 |
| 20:49, 2 January 2018 | Roubo workbench 1-22.JPG (file) |  |
455 KB | Lukas (talk | contribs) | woodworking vise installed and ready to use on our {{Roubo-1}}! | 1 |
| 20:48, 2 January 2018 | Roubo workbench 1-21.JPG (file) |  |
456 KB | Lukas (talk | contribs) | two boards are added to our {{Roubo-1}}'s top to facilitate proper installation of a large woodworking vise | 1 |
| 20:37, 2 January 2018 | Roubo workbench 1-20.JPG (file) |  |
427 KB | Lukas (talk | contribs) | woodworking vise for our {{Roubo-1}} - seen here trying on a brand new pair of boards that will increase the benchtop's thickness | 1 |
| 20:35, 2 January 2018 | Roubo workbench 1-19.JPG (file) |  |
583 KB | Lukas (talk | contribs) | all that planing moved our {{Roubo-1}} around quite a bit and produced tons of shavings :-D | 1 |
