Drill Presses

MachineInfoBox Einhell TB 13/5 ED
Synonyms:	bench drill, pillar drill, column drill; DE: Säulenbohrmaschine, "Tischbohrmaschine", "Bohrständer", "Senkbohrer"
Material:	depending on the drill bit: wood, plastic, metal
Used with:	drill bits, inclinometer
Access Requirements:	The query description has an empty condition.Property "Needs Introduction" (as page type) with input value "The query description has an empty condition." contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
Manual:	very similar to "Güde GTB 13/5"
Tutors:	The query description has an empty condition.
Similar (More or Less):	drill stand, other drills

... further resultsProperty "Has caption" (as page type) with input value "Vertical Bandsaws, Vertical Bandsaws, CNC Router, Mechanical Hand Tool, 3D Printers, 3D Printers, 3D Printers, 3D Printers, 3D Printers, 3D Printers, Oscilloscope, Oscillating Tool, Multimeter, Chop Saw, Wanted:Handheld Belt Sander, Bench Grinders, Bench Grinders, Table Saw, Handheld Circular Saws, Dust Extractors, Dust Extractors, Biscuit Joiner, Chop Saw, Handheld Circular Saws, CNC Router, Compressor, Archived:Corded Drills, Archived:Corded Drills, Cordless Drills, Cordless Disc Grinder, Cordless Drills, Jigsaws, Vice, Lab Power Supplies, Lab Power Supplies, Corded Disc Grinder, Corded Disc Grinder, Wood Lathes, CNC Mill, Wood Lathes, Laser Cutter, Eccentric Sanders, Kitchen Equipment, Chop Saw, Wood Lathe Accessory, Laser Printers, Audio Equipment, Audio Equipment, Wood Lathe Accessory, Wood Lathe Accessory[[:Special:Ask/-5B-5BHas-20Internal-20AssetID::+-5D-5D/-3FHas-20Internal-20Category/mainlabel=-2D/limit=50/offset=50/format=plainlist/link=none/headers=hide/default=Drill-20Presses" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process."{{{assetid}}}" is not a number.|]]

To use the machine, you'll need to mount a drill bit that suits your workpiece and securely fasten it with the chuck key.

We got this machine when it was pretty old already so Patrick took it apart, cleaned and painted it. Something in the pulleys still isn't centered which causes slight vibration in the machine. It isn't much of an issue as the shaft is quite rigid and runs true.

The drill bits can sometimes be a little off center as the chuck is not that great - just quickly check before drilling. It often helps to twist the bit back and forth with one hand while closing the chuck with the other.

Safety

• read the manual!
• get a personal introduction by one of the tutors!
• wear personal protection, but never operate the drill press with gloves on!
• don't drill materials with harmful dust!
• make sure there is nobody nearby who might be surprised by a piece of shrapnel flying their way!
• use a machine vise for small workpieces!
• never use a machine vise on top of a wooden board or two wooden boards at the same time (tower rule)!

Fastening Options

a lever clamp can be used for some workpieces such as this door handle shaft

• we should get one or two of these drill press locking clamps if they are available around here
• additional tables to mount on the simple "standard" one are probably worth the effort
  • inspiration: Stephan Pöhnlein on YouTube

Jigs

• V-block for drilling into round or angled things

Shortcomings/Upgrade Potential

the depth stop of the Einhell drill press is made of a flexible material, reducing its precision - while this can often be ignored, it is important to remember for fine work

Until there is money left over for a newer/fancier drill press, we can collect desirable features here:

• more stable depth stop (see photo)
• electronic speed control instead of manual change of belts
• larger "throat size" (distance from the drill bit to the stand)
• safety: clear chuck guard (probably rather common nowadays)
• anything else?