Triton TWSS10

From CoMakingSpace Wiki

Revision as of 23:21, 17 January 2024 by NitramLegov (talk | contribs) (→‎Triton TWSS10: add german type)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Triton TWSS10

MachineInfoBox

Triton TWSS10

Triton TWSS10.jpg
Synonyms: wet grinder, whetstone sharpener,
dual-purpose wet grinder/stropping wheel;
DE: Nassschleifmaschine
Type: Bench Grinders
Material: metal (not aluminum)
Location: Grinding Table
Access Requirements: Bench Grinder Introduction
Status: Working
Manual: Instruction Manual
Explosion Diagram
Product Sheet
Tutors: Lukas
Pakue
Johannes
Luzian
Utis
Sebastian
Similar (More or Less): disc grinder, files, sandpaper



The Triton TWSS10 provides a stone for wet grinding and a leather stropping wheel. Please ensure you always empty the water and loosen the torque screw when you are done!

This grinder is slow moving and intended for the final sharpening passes, not gor quick material removal. It has a 220 grit "diamond wheel" (with a water bath) and a leather honing wheel. It may be nice to add a swiveling base under it so you don't need to pick up the machine to switch directions!

There are quite a few accessories available from the manufacturer. You can find them in the manual (page 8) as well as on the product page.

We should document individual accessories as we get (or 3D print) them.

Straight Edge Jig

We have a straight edge jig for flat irons like bevel edge chisels or plane blades.