File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 20:02, 4 September 2017 | Plywood part.jpg (file) |  |
141 KB | Lukas (talk | contribs) | == Summary == Small part built from baltic birch plywood == Licensing == {{PD}} | 1 |
| 20:01, 4 September 2017 | Plywood 'color' engraving.JPG (file) |  |
291 KB | Lukas (talk | contribs) | == Summary == test piece of plywood to see which colors are possible with a laser cutter depending on engraving speed and power == Licensing == {{CC-by-sa-4.0}} | 1 |
| 20:00, 4 September 2017 | Pipe wrench.jpg (file) |  |
342 KB | Lukas (talk | contribs) | == Summary == a pipe wrench == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:59, 4 September 2017 | Pipe cutter.JPG (file) |  |
212 KB | Lukas (talk | contribs) | == Summary == a 25 mm aluminum pipe that has just been cut with a small pipe cutter == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:58, 4 September 2017 | Pine log drying in attic.JPG (file) |  |
252 KB | Lukas (talk | contribs) | == Summary == a piece of pine wood drying in my attic for [[Project:Drying Timber|an experimentation] == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:55, 4 September 2017 | PicB.JPG (file) |  |
6 KB | Lukas (talk | contribs) | little demo image, e.g. for galleries (see Help:Files) | 1 |
| 19:55, 4 September 2017 | Pic02.JPG (file) |  |
8 KB | Lukas (talk | contribs) | little demo image, e.g. for galleries (see Help:Files) | 1 |
| 19:54, 4 September 2017 | Pic01.JPG (file) |  |
7 KB | Lukas (talk | contribs) | little demo image, e.g. for galleries (see Help:Files) | 1 |
| 19:52, 4 September 2017 | Personal protection.JPG (file) |  |
246 KB | Lukas (talk | contribs) | == Summary == typical personal protection gear: ear defenders, dust mask, safety goggles and gloves. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:51, 4 September 2017 | Parcel twine and cotton string.JPG (file) |  |
142 KB | Lukas (talk | contribs) | == Summary == a ball of parcel twine and a spool of string == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:49, 4 September 2017 | Parcel twine.JPG (file) |  |
61 KB | Lukas (talk | contribs) | == Summary == ball of parcel twine (excerpt from File:parcel twine and cotton string.JPG) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:47, 4 September 2017 | OpenSCAD seminar 2L.PNG (file) |  |
24 KB | Lukas (talk | contribs) | == Summary == A result from the OpenSCAD seminar: parametric L with a hole. Screenshot from OpenSCAD 2015.03-2. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:44, 4 September 2017 | OpenCAMLib.png (file) |  |
400 KB | Lukas (talk | contribs) | == Summary == Screenshot of an OpenCAMLib example visualization. == Licensing == {{PD}} | 1 |
| 19:42, 4 September 2017 | Open-sign.jpg (file) |  |
1.38 MB | Lukas (talk | contribs) | first "Open Sign" prototype Photo by Mitja | 1 |
| 19:39, 4 September 2017 | One-handed clamps.JPG (file) |  |
167 KB | Lukas (talk | contribs) | == Summary == One-handed clamps that are tightened with a mechanism such as in a caulking gun. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:37, 4 September 2017 | Old school compass.JPG (file) |  |
317 KB | Lukas (talk | contribs) | == Summary == compass capable of taking a regular pencil on its marking end == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:34, 4 September 2017 | Oil pastel marking.JPG (file) |  |
200 KB | Lukas (talk | contribs) | == Summary == Patrick getting artsy with a drill press warning note, using an oil pastel. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 19:28, 4 September 2017 | Office staplers.jpg (file) |  |
191 KB | Lukas (talk | contribs) | == Summary == Photo of two office staplers == Licensing == {{PD}} | 1 |
| 19:26, 4 September 2017 | Nyloc nuts.JPG (file) |  |
249 KB | Lukas (talk | contribs) | == Summary == a pile of M6 nyloc nuts == Licensing == {{PD}} | 1 |
| 19:25, 4 September 2017 | Ms-foam.jpg (file) |  |
290 KB | Lukas (talk | contribs) | some pieces of foam | 1 |
| 19:23, 4 September 2017 | Ms-fabric.jpg (file) |  |
450 KB | Lukas (talk | contribs) | a bunch of fabric | 1 |
| 19:21, 4 September 2017 | Ms-duct-tape.jpg (file) |  |
182 KB | Lukas (talk | contribs) | == Summary == a roll of duct tape == Licensing == {{PD}} | 1 |
| 19:20, 4 September 2017 | Ms-clear-tape.jpg (file) |  |
114 KB | Lukas (talk | contribs) | == Summary == a roll of clear tape == Licensing == {{PD}} | 1 |
| 17:27, 4 September 2017 | Mpi principle.png (file) |  |
5 KB | Lukas (talk | contribs) | == Summary == The idea behind any {{mpi}} - individual tiles are arranged and mapped with internal links to serve as a uniform navigational entity == Licensing == {{CC-by-sa-4.0}} | 1 |
| 17:06, 4 September 2017 | Metric screws.jpg (file) |  |
401 KB | Lukas (talk | contribs) | == Summary == two M5{{x}}16 mm metric screws == Licensing == {{CC-by-sa-4.0}} | 1 |
| 17:05, 4 September 2017 | Metabo SBE 710.jpg (file) |  |
420 KB | Lukas (talk | contribs) | == Summary == Metabo SBE 710 impact drill. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 17:02, 4 September 2017 | Masonry Bits.JPG (file) |  |
135 KB | Lukas (talk | contribs) | == Summary == a set of masonry drill bits - note the chisel tips == Licensing == {{PD}} | 1 |
| 17:00, 4 September 2017 | Masking-tape.jpg (file) |  |
161 KB | Lukas (talk | contribs) | == Summary == a roll of masking tape == Licensing == {{PD}} | 1 |
| 16:59, 4 September 2017 | Long-term clamping.JPG (file) |  |
313 KB | Lukas (talk | contribs) | == Summary == An F-clamp used to attach a post to a wall, notably beaten up from outside conditions. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:56, 4 September 2017 | Lochband.JPG (file) |  |
67 KB | Lukas (talk | contribs) | == Summary == a roll of plumber's tape == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:55, 4 September 2017 | Lasering PP containers.jpg (file) |  |
510 KB | Lukas (talk | contribs) | == Summary == Freshly laser cut holes for a Raspberry Pi camera in a PP container. Also shown: prototyping box used to find the right material settings. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:49, 4 September 2017 | Lasered football team logos.JPG (file) |  |
347 KB | Lukas (talk | contribs) | == Summary == about half of the laser cut parts for a giant football scoreboard == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:48, 4 September 2017 | Laser engraving NFL logo.JPG (file) |  |
376 KB | Lukas (talk | contribs) | == Summary == laser engraving the logo of the NFL into poplar plywood for a giant football scoreboard == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:47, 4 September 2017 | Laser cut hole clearing.JPG (file) |  |
225 KB | Lukas (talk | contribs) | == Summary == The angled end of a scriber is pretty useful for pushing tiny scraps out of a laser cut workpiece! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:39, 4 September 2017 | Laptop wall mount table.svg (file) |  |
30 KB | Lukas (talk | contribs) | == Summary == table parts of the laptop wall mount designed in Fusion 360 for laser cutting out of 6 mm thick sheet material and using an 11 mm hinge rod - '''actual wall mounting parts not included!''' == Licensing =... | 1 |
| 16:38, 4 September 2017 | Laptop wall mount fusion drawing.JPG (file) |  |
21 KB | Lukas (talk | contribs) | == Summary == isometric view of the assembled table portion of the laptop wall mount in Fusion 360's "drawing" interface == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:35, 4 September 2017 | Laptop wall mount.jpg (file) |  |
1.77 MB | Lukas (talk | contribs) | == Summary == wall mount for a laptop - with laptop, without wall (edited in GIMP) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:20, 4 September 2017 | Laptop mount wooden hinge 2.JPG (file) |  |
323 KB | Lukas (talk | contribs) | == Summary == aligning the wooden hinges that stabilize the "leg" of the laptop wall mount so that the leg can fully fold around the central table rib == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:19, 4 September 2017 | Laptop mount wooden hinge 1.JPG (file) |  |
406 KB | Lukas (talk | contribs) | == Summary == cutting a piece of scrap wood to stabilize the "leg" of the laptop wall mount == Licensing == {{CC-by-sa-4.0}} | 1 |
| 16:17, 4 September 2017 | Laptop mount glue up.JPG (file) |  |
369 KB | Lukas (talk | contribs) | == Summary == using some F-clamps, spring clamps and pieces of scrap wood to glue the wooden "hinges" and the central rib to the laptop wall mount == Licensing =... | 1 |
| 10:24, 4 September 2017 | Jar jar shelf 6.JPG (file) |  |
299 KB | Lukas (talk | contribs) | == Summary == The "Jar Jar Shelf" installed in Lukas' kitchen == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:23, 4 September 2017 | Jar jar shelf 5.JPG (file) |  |
287 KB | Lukas (talk | contribs) | == Summary == fully assembled "Jar Jar Shelf" with cordless drills (one for drilling, one for screwing) == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:22, 4 September 2017 | Jar jar shelf 4.JPG (file) |  |
259 KB | Lukas (talk | contribs) | == Summary == all parts of the "Jar Jar Shelf" aligned for assembly, with a jar for a last check of measurements == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:21, 4 September 2017 | Jar jar shelf 3.JPG (file) |  |
257 KB | Lukas (talk | contribs) | == Summary == small blockboard pieces with dowel pegs and additional markings for screws == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:20, 4 September 2017 | Jar jar shelf 2.JPG (file) |  |
200 KB | Lukas (talk | contribs) | == Summary == lip and spur wood drill bit marked with masking tape to see how deep to drill the dowel peg holes == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:18, 4 September 2017 | Jar jar shelf 1.JPG (file) |  |
271 KB | Lukas (talk | contribs) | == Summary == pre-cut pieces of blockboard waiting for assembly of the "Jar Jar Shelf" == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:12, 4 September 2017 | Jar Jar Shelf.png (file) |  |
6 KB | Lukas (talk | contribs) | == Summary == schematic of my "Jar Jar Shelf" - any similarity to weird movie characters is ''absolutely'' unintended... == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:10, 4 September 2017 | H-bridge test setup.jpg (file) |  |
355 KB | Lukas (talk | contribs) | == Summary == One of the first flip dot display tests: Test of the H-bridge. Photo by Patrick == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:03, 4 September 2017 | Football scoreboard team alignment 2.JPG (file) |  |
338 KB | Lukas (talk | contribs) | == Summary == aligning the teams from the American Conference for a giant football scoreboard, using paper squares as a reference == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:02, 4 September 2017 | Football scoreboard team alignment.JPG (file) |  |
343 KB | Lukas (talk | contribs) | == Summary == finding the right spot for each team on the giant football scoreboard == Licensing == {{CC-by-sa-4.0}} | 1 |
