Bosch PST 750 PE "EXPO2000": Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) (Outsourced from Jigsaws) |
(→Bosch PST 750 PE "EXPO2000": donation, not loan) |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 6: | Line 6: | ||
|location=[[Location::Saw Station|saw station]] | |location=[[Location::Saw Station|saw station]] | ||
|manual=[https://www.manualslib.com/manual/1115989/Bosch-Pst-650-Pe.html ManualsLib] | |manual=[https://www.manualslib.com/manual/1115989/Bosch-Pst-650-Pe.html ManualsLib] | ||
|synonyms=DE:Stichsäge|type=Jigsaw|material=[[Wood]] | |assetid=86|synonyms=DE:Stichsäge|type=Jigsaw|material=[[Wood]] | ||
}} | }} | ||
[[User:Lukas|Lukas]] | [[User:Lukas|Lukas]] [[Donations|donated]] his Bosch jigsaw to the Space in the early years. | ||
It requires T-shank blades to work. | It requires T-shank blades to work. | ||
[[User:Malte|Malte]] 3D printed an adapter to use this saw with our Festool shop vac, [https://www.thingiverse.com/thing:3408971 here's the design on Thingiverse] in case it should break or go missing. You may need to tape the adapter to the saw. | [[User:Malte|Malte]] 3D printed an adapter to use this saw with our Festool shop vac, [https://www.thingiverse.com/thing:3408971 here's the design on Thingiverse] in case it should break or go missing. You may need to tape the adapter to the saw. | ||
<br clear="all" /> | |||
Latest revision as of 20:34, 17 November 2024
Bosch PST 750 PE "EXPO2000"
| MachineInfoBox Bosch PST 750 PE "EXPO2000" | |
|---|---|
| |
| Synonyms: | DE:Stichsäge |
| Type: | Jigsaws |
| Material: | Wood |
| Location: | Saw Station |
| Access Requirements: | Reciprocating Saw Introduction |
| Status: | Working |
| Manual: | ManualsLib |
| Tutors: | Lukas Pakue Johannes Luzian Utis Sebastian Baumphil |
Lukas donated his Bosch jigsaw to the Space in the early years.
It requires T-shank blades to work.
Malte 3D printed an adapter to use this saw with our Festool shop vac, here's the design on Thingiverse in case it should break or go missing. You may need to tape the adapter to the saw.
