Pliers and Waiting Lists: Difference between pages

From CoMakingSpace Wiki

(Difference between pages)

VisualWikitext
 
Joey (talk | contribs)
9 edits
 
Line 1: Line 1:
Pliers are hand tools to strongly grip, squeeze or cut a workpiece with one hand.
An overview of the waiting lists for our [[introductions]] that take more time than the [[tutors]] can usually invest spontaneously.


For the wide-jawed tool used to extract nails, please visit [[Pincers|"pincers"]]. For the special adjustable pliers that stay shut with no need to hold them, see [[Grip Pliers|"grip pliers"]].
''If you want to "wait" for a vehicle spot, see [[Vehicle Workspaces|vehicle workspaces]].''


== Long Nose Pliers ==
<big>'''How to Use'''</big><br>Please '''link''' your [[Special:MyPage|user page]] at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your [[Special:Preferences|preferences]]!


{{ToolInfoBox
DO: link yourself for the introductions you need for your project(s)
|tool name=KNIPEX 30 36 160
 
|image=Knipex 30 36 160.jpg
DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!
|synonyms=DE: Langbeckzange
 
|type=hand tool
If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.  
|access=
 
|manual=[https://www.knipex.com/products/insulated-tools/long-nose-pliers/long-nose-pliers/3036160 KNIPEX 30 36 160]
 
|location=[[Location::Electronics Room|electronics room]]
==[[3D Printer Introduction]]==
|material=wires
 
|extrabox=yes
Tutors:{{#show: 3D Printer Introduction
|?Tutor
| format=ul
}}
}}
Time required: ~1h


Long nose pliers have narrow, tapered jaws that allow for gripping, bending, and positioning wires in tight or hard-to-reach spaces. They are commonly used in electrical work, jewelry making, and precision tasks requiring control and access in confined areas.
Next Date: TBD


<br clear="all>
'''Waiting Members:'''


== Electronic Precision Cutters ==
*[[mobell]]
*[[User:DMaennle|DMaennle]]
*[[SteffenK|Steffen]]
*[[B--rian|B--rian]] (I have quite some experience with my Prusa Mini)


Electronic precision cutters are designed for ultra-fine, flush cuts on soft wires and electronic components. Their sharp, ground cutting edges and smooth operation make them ideal for work on PCBs, delicate wires, and precision assemblies. Do not cut nails or other hard metals with them!
==[[Arc Welding Introduction]]==


{{ToolInfoBox
Tutors: {{#show: Arc Welding Introduction
|tool name=KNIPEX 78 06 125 Electronic Super Knips
|?Tutor
|image=Knipex 78 06 125.jpg
| format=ul
|synonyms=DE: Elektronik-Seitenschneider
|type=hand tool
|access=
|manual=[https://www.knipex.com/products/electronics-pliers/electronic-super-knips/electronic-super-knips/7806125 KNIPEX 78 06 125]
|location=[[Location::Electronics Room|electronics room]]
|material=[[Material:Zip Ties|zip ties]], wires
|extrabox=yes
}}
}}
Time required: 45 min + 10 min per member


<br clear="all>
Next Date: TBD


== Combination Pliers ==
'''Waiting Members:'''
{{ToolInfoBox
 
|tool name=Combination Pliers
* [[User:Mitja|Mitja]]
|image=tool-pliers.jpg
* [[User:Utis|Utis]]
|imageproblem= {{WMC}}
*[[User:SvenG|SvenG]]
|synonyms=DE: Kombizange
*[[User:Björn|Björn]]
|type=hand tool
*[[User:Tom|Tom]]
|access=
*[[User:Ol|Oliver]]
|location=[[Location::Metal Workshop|metal workshop]], [[Location::Wood Workshop|wood workshop]], [[Location::Electronics Room|electronics room]]
*[[User:Meyerml|marcel meyer]]
|material=[[Material:Metal|metal]], [[Material:Nails|nails]], [[Material:Zip Ties|zip ties]], wires
*[[Jakob]]
|extrabox=yes
*[[User:Paul Reimers|Paul]]
* [[User:Christoph|Christoph]] (no response 2024-6-24)
* [[User:Andreas|Andreas]] (no response 2024-6-24)
*[[User:Freegroup|Andreas Herz]]
*[[B--rian|B--rian]]
*[[User:Nicolai|Nicolai]]
*Thomas Braun
*[[Erik]]
*[[MobiTobi]]
*[[User:Heiko|Heiko]]
*[[User:Nibuzz|Nibuzz]]
 
== [[Chop Saw Introduction]] ==
Tutors: {{#show: Chop Saw Introduction
|?Tutor
| format=ul
}}
}}
A very common type of pliers are combination pliers which can be used to cut, grip and squeeze. We have ''a few'' of this kind.


Combination pliers are, for example, well suited to tighten and trim [[Material:Zip Ties|zip ties]] if they are used in easily accessible places or to bend thin sheet metal.
Time required: ~30 min
 
Next Date: TBD


<br clear="all>
'''Waiting Members:'''


{{ToolInfoBox
* [[User:SvenG|SvenG]]
|tool name=KNIPEX 03 06 180
*[[Volker]] Bold
|image=Knipex 03 06 180.jpg
*[[User:SteffenK|Steffen]]
|synonyms=DE: Kombizange
*[[LuLeBe|Leander Berg]]
|type=hand tool
*[[MobiTobi]]
|access=
*[[User:Heiko|Heiko]]
|location=[[Location::Electronics Room|electronics room]]
 
|material=[[Material:Zip Ties|zip ties]], wires
== [[CNC Mill Introduction]] ==
|extrabox=yes
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''
 
Tutors: {{#show: CNC Mill Introduction
|?Tutor
| format=ul
}}
}}
Time required: approx. 1.5 to 2 h
Next Date: TBD
'''Waiting Members:'''
*[[User:Ol|Oliver]]
*[[User:Andreas|Andreas R]]
*[[User:vjoettinger]]
*[[User:StStefa|Stefan Steinert]]
*[[Utis]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[Mamad]]
*[[User:Marayah|Marayah]]
*[[User:Erik1000|Erik]]
*[[User:SteffenK|Steffen]]
*[[User:MobiTobi|Tobi]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*[[User:Lepus|Nidal]]
*Alexander B.


<br clear="all">
== [[CNC Router Introduction]] ==
'''requires the [[Handheld Router Introduction|handheld router introduction]]!'''


==Needle-Nose / Snipe Nose Side Cutting Pliers==
Tutors: {{#show: CNC Router Introduction
{{ToolInfoBox
|?Tutor
|tool name=Snipe Nose Side Cutting Pliers
| format=ul
|image=Knipex 26 16 200.jpg
|synonyms=DE: Spitzzange mit Schneide
|type=hand tool
|access=
|manual=https://cdn.knipex.com/datasheets/26-16-200-en.pdf
|location=[[Location::Electronics Room|electronics room]]
|material=wires (soft, medium and hard)
|similar=[[tweezers]]
|extrabox=yes
}}
}}
Time required: > 1 h (to be confirmed)
Next Date: TBD
'''Waiting Members:'''


The KNIPEX 26 16 200 Snipe Nose Side Cutting Pliers (Stork Beak Pliers) are ideal for precise gripping, bending, and cutting in tight or hard-to-reach spaces.
* [[User:Ed_Green|Ed_Green]]
*[[User:Lepus|Nidal]]
*[[LaVo]]
*[[User:FabianM|Fabian]]
*[[User:Loewenstein|Jan]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[User:StStefa|Stefan Steinert]]
*[[User:Jan K.|Jan K.]]
*[[Paul Reimers|Paul]]
*[[User:FBraun|FBraun]]
*[[User:Haifischfutter|Markus K.]]
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Mamad|Mamad]]
*[[User:MobiTobi|Tobi]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Maker-Joe|Jochen]]
*[[Deaf]]
*[[Jaggi2]]
*[[MobiTobi]]


<br clear="all">
== [[Handheld Router Introduction]] ==


{{ToolInfoBox
Tutors: {{#show: Handheld Router Introduction
|tool name=Needle-Nose Pliers
|?Tutor
{{WMC}}|image=Klein Tools D203-6.jpg
| format=ul
|synonyms=DE: Spitzzangen
|type=hand tool
|access=
|location=[[Location::Metal Workshop|metal workshop]], [[Location::Wood Workshop|wood workshop]], [[Location::Electronics Room|electronics room]]
|material=[[metals]]; [[nails]], [[Material:Zip Ties|zip ties]], [[staples]], wires
|similar=[[tweezers]]
|extrabox=yes
}}
}}
Time required: ~ 1 h + 15 min per member
Next Date: TBD
'''Waiting Members:'''
*[[User:Nora|Nora]] (no response 2024-2-28)
*[[User:CaroSam|Caroline]] (no response 2024-2-28)
*[[User:Marayah|Marayah]]
*[[User:SteffenK|Steffen]]
*[[User:Pierre 7029|Pierre]]
*[[User:MobiTobi|Tobi]]
*[[B--rian|B--rian]]
*[[User:Jnafls|Johannes]]
*[[Deaf]]
*[[MobiTobi]]
*[[User:Ivastar|Ivastar]]


==[[Horizontal Bandsaw Introduction]]==


Needle-nose pliers are similar to combination pliers but are typically used for more delicate gripping and bending tasks. For example, they are quite useful for removing [[staples]] from ''soft'' [[wood]]. Where these pliers are still too big, you may want to use [[tweezers]].
Tutors: {{#show: Horizontal Bandsaw Introduction
|?Tutor
| format=ul
}}
Time required: na


They come in a bent and straight variety.
Next Date: TBD


<br clear="all">
'''Waiting Members:'''
* [[Martin]]
* [[User:StStefa|Stefan Steinert]]
* [[Utis]]
* [[User:PloenK|Thomas Scholz]]
*[[User:SteffenK|Steffen]]
*[[User:Jan K.|Jan K.]]
*[[Volker]]
*[[User:Dean|Dean]]
*[[User:Freegroup|Andreas Herz]]
*[[Kaesekuchen007|Michael Wallenborn]]
*[[Deaf]]
*[[Erik]]
*[[Jaggi2]]
*[[User:Hm.mane|Hm.mane]]


==Tongue-and-Groove Pliers==
==[[Jointer-Planer Introduction]]==
{{ToolInfoBox
Tutors: {{#show: Jointer-Planer Introduction
|tool name=Tongue-and-Groove Pliers
|?Tutor
|image=Vandpumpetang.jpg
| format=ul
|imageproblem= {{WMC}}
|synonyms=water pump pliers, adjustable pliers,<br>"Channellock pliers"; DE: Wasserpumpenzange
|type=hand tool
|access=
|location=[[Location::Metal Workshop|metal workshop]], [[Location::Wood Workshop|wood workshop]]
|material=hex head [[screws]], [[nuts]], pipes
|similar=[[Adjustable Wrench|(adjustable) wrenches]]
|extrabox=yes
}}
}}
Tongue-and-groove pliers can be useful to grip nuts and bolts or pretty much any other material as they are widely adjustable. However, an actual [[Wrenches|wrench]] is a better choice if the size you require is available.


They also yield pretty high gripping force due to their long handles which may be useful in some squeezing or crimping applications.
Time required: 60 min + 15 min per member


<br clear="all">
Next Date: 2025-7-2, 20:30
{{ToolInfoBox
 
|tool name=Pliers Wrench Knipex 86 06 250
'''Waiting Members:'''
|image=Knipex 86 06 250.jpg
*[[User:Ol|Oliver]]
|german=Zangenschlüssel
*[[User:Jan K.|Jan K.]]
|synonyms=DE: Zangenschlüssel
*[[User:Haifischfutter|Markus K.]]
|type=hand tool
*[[User:SteffenK|Steffen]]
|access=
*[[Jnafls|Johannnes]]
|location=[[Location::Electronics Room|electronics room]]
*[[Deaf]]
|manual=[https://www.knipex.com/products/pipe-wrenches-and-water-pump-pliers/pliers-wrenches-pliers-and-a-wrench-in-a-single-tool/pliers-wrenches-pliers-and-wrench-single-tool/8606250 KNIPEX 86 06 250]
*[[Erik]]
|similar=[[Adjustable Wrench|(adjustable) wrenches]]
*LeoF
|extrabox=yes
 
== [[Laser Cutter Introduction]] ==
 
Tutors: {{#show: Laser Cutter Introduction
|?Tutor
| format=ul
}}
}}
<br clear="all">
Time required: ~2h
 
Next Date: TBD
 
'''Waiting Members:'''
 
*[[User:Loewenstein|Jan]]
*[[User:Lepus|Nidal]]
*[[User:Volker|Volker]]
*[[User:Ivastar|Ivastar]]


==Diagonal Pliers==
== [[Metal Lathe Introduction]] ==
{{ToolInfoBox
Tutors: {{#show: Metal Lathe Introduction
|tool name=Diagonal Pliers
|?Tutor
|german=Zangen
| format=ul
|image=Heavy wire cutters.jpg
|synonyms=diagonal cutters, side cutters, "nippers";<br>DE: Seitenschneider
|type=hand tool
|access=
|location=[[Location::Metal Workshop|metal workshop]], [[Location::Wood Workshop|wood workshop]], [[Location::Electronics Room|electronics room]]
|material=[[metal]] wires, [[Material:Zip Ties|zip ties]]
|similar=[[Bolt Cutter|bolt cutter]], [[Flush Cutters|flush cutters]]
}}
}}


Diagonal cutting pliers are used to snip wires, e.g. in electrical work. Although a cutter is included in [[Pliers#Combination Pliers|combination pliers]] and many [[Pliers#Needle-Nose Pliers|needle-nose pliers]] as well, these can be sharpened much more easily and enable the user to reach wires in tight corners as the cutting edge continues over the entire length of the tool head.
Time Required: 2-3h
 
Next Date: TBD


[[Flush Cutters|Flush cutters]] can reach even tighter spaces and are used for delicate [[electronics]] work.
'''Waiting Members:'''


<br clear="all">
*[[User:ErikSchatz|Erik]]
*[[User:BenKenobi|Benedict]]
*[[User:Meyerml|marcel meyer]]
*[[User:Ol|Oliver]]
*[[User:vjoettinger]]
*[[User:DMaennle|DMaennle]]
*[[Erik]]
*[[User:Freegroup|Andreas Herz]]
*[[User:Schmidt3D|Mirko Schmidt]]
*[[User:PloenK|Thomas Scholz]]
*[[Jaggi2]]
*[[MobiTobi]]
*[[User:Lepus|Nidal]]
*[[User:Nibuzz|Nils]]


{{ToolInfoBox
== [[Sliding Table Saw Introduction]] ==
|tool name=KNIPEX 70 06 160 Diagonal Cutter
|german=Seitenschneider
[[Tutors]]: {{#show: Sliding Table Saw Introduction
|image=Knipex 70 06 160.jpg
|?Tutor
|synonyms=DE: Seitenschneider
| format=ul
|type=hand tool
|access=
|manual=[https://cdn.knipex.com/datasheets/70-06-160-en.pdf KNIPEX 70 06 160]
|location=[[Location::Electronics Room|electronics room]]
|material=wires, [[Material:Zip Ties|zip ties]]
}}
}}


Time required: ~ 1 h
Next Date: 2025-4-9, 21:00


<br clear="all">
'''Waiting Members:'''
*[[FabianM|Fabian]]
*[[Volker]]
*[[User:FranKNG|Frank]]
*
*[[User:Pkalbers|Patrick A.]]
*[[Deaf]]
*Moritz B.
*TOm Braun
*[[MobiTobi]]
*[[User:DMaennle|DMaennle]]
*LeoF
*Alexander B.[[Laser Cutter Introduction|Nibuzz]]
*[[User:Nibuzz|Nibuzz]]


==Crimping Pliers==
== [[Table Saw Introduction]] ==
{{ToolInfoBox
|tool name=Crimping Pliers
[[Tutors]]: {{#show: Table Saw Introduction
|image=CrimpingPliers.jpg
|?Tutor
|synonyms=DE: Krimpzange
| format=ul
|type=hand tool
|access=read this section
|location=[[Location::Electronics Room|electronics room]]
|material=[[Dupont Crimps|Dupont crimps]], [[metal]] wires
|similar=
|extrabox=yes
}}
}}
Crimping pliers are used to squeeze connectors around the ends of wires/cables.


Many types exist for optimum fit to the varius types of [[crimps]] or [[ferrules]], the orange pliers in the picture are made for [[Dupont Crimps|Dupont crimps]].
Time required: ~ 1 h
 
Next Date: 2025-6-18 20:00
 
'''Waiting Members:'''
 
* [[User:Ozel|Oliver]]
*[[User:SteffenK|Steffen]]
*[[User:Robin]]
*[[User:Arthur|Arthur]]
*[[MobiTobi]]
 
== [[Vertical Bandsaw Introduction]]==


=== Knipex MultiCrimp ===
Tutors: {{#show: Vertical Bandsaw Introduction
{{ToolInfoBox
|?Tutor
|tool name=Knipex Multicrimp
| format=ul
|image=Knipex Multicrimp.jpg
|access=read this section and/or have a look at the manual
|location=[[Location::Electronics Room|electronics room]]
|material=various [[crimps]], [[metal]] wires
|similar=
|manual=[https://web-assets.knipex.com/sites/default/files/USCAT19_97%2033_MultiCrimp%20Crimping%20Pliers%20with%20Quick%20Changer%20Magazine.pdf KNIPEX MultiCrimp®]
|extrabox=yes
}}
}}
The '''KNIPEX MultiCrimp''' is a versatile crimping tool with interchangeable dies for multiple applications. It supports crimping of insulated terminals, ferrules, coax connectors, and more.
Time required: ~ 1.5 h
 
Next Date: 2025-6-25, 19:00
 
'''Waiting Members:'''
 
*[[User:Haifischfutter|Markus K.]]
*[[User:Olli.Klos|Olli Klos]] (no response 2024-3 & 2024-11)
*[[User:Jnafls|Johannes]]
*Marc Werther
*[[User:Robin]]
*[[Deaf]]
*[[Erik]]
*[[MobiTobi]]
*[[Nicolai]]
*LeoF
*[[User:Hm.mane|Hm.mane]]
*[[User:Nibuzz|Nibuzz]]


'''Key Features''':
==[[Woodturning Introduction]]==
* Quick-change crimping dies
* Ratchet mechanism for consistent results
* Ergonomic, comfortable grips
* Compatible with various connector types


'''Usage''':
Tutors: {{#show: Woodturning Introduction
* Insert the correct die.
|?Tutor
* Place the connector and wire.
| format=ul
* Squeeze handles until the ratchet releases.
}}
Time required: ~ 1 h + 20 min per person


[[File:MultiCrimp jaw change.jpg|thumb|left|
Next Date: 2025-4-2, 20:00
The dies can easily be exchanged by sliding the pliers into the round magazine]]


'''Waiting Members:'''
*[[User:Baumphil|baumphil]]
*[[User:FranKNG|Frank K.]]
*[[User:vjoettinger]]
*[[User:Olli.Klos|Olli Klos]] (no response July & Nov 2023)
*[[User:MaliMae|MaliMae]]
*[[User:Paul Reimers|Paul]]
*[[User:DMaennle|DMaennle]]
*[[User:Jan K.|Jan K.]]
*[[User:Micha|Micha]]
*[[User:Freegroup|Andreas Herz]]
*[[Deaf]]
*[[Erik]]
*LeoF
*Tom
*Joel A.


[[Category:Metalworking]]
[[Category:Introductions]]

Revision as of 18:28, 19 October 2025

An overview of the waiting lists for our introductions that take more time than the tutors can usually invest spontaneously.

If you want to "wait" for a vehicle spot, see vehicle workspaces.

How to Use
Please link your user page at the bottom of each list you're interested in after you've filled it with enough information to contact you and/or activated "Allow other users to email me" in your preferences!

DO: link yourself for the introductions you need for your project(s)

DO NOT: link yourself for all available introductions just because you might need it at some point in the future - chances are you'll forget something important by the time you actually use the machine!

If a list is full enough and/or you have been waiting for a while, please reach out to the tool's tutors and kindly ask for a date - maybe they've just been too busy, but it could also be that they missed the list filling up and would appreciate the reminder.


3D Printer Introduction

Tutors:

Time required: ~1h

Next Date: TBD

Waiting Members:

Arc Welding Introduction

Tutors:

Time required: 45 min + 10 min per member

Next Date: TBD

Waiting Members:

Chop Saw Introduction

Tutors:

Time required: ~30 min

Next Date: TBD

Waiting Members:

CNC Mill Introduction

requires the handheld router introduction!

Tutors:

Time required: approx. 1.5 to 2 h

Next Date: TBD

Waiting Members:

CNC Router Introduction

requires the handheld router introduction!

Tutors:

Time required: > 1 h (to be confirmed)

Next Date: TBD

Waiting Members:

Handheld Router Introduction

Tutors:

Time required: ~ 1 h + 15 min per member

Next Date: TBD

Waiting Members:

Horizontal Bandsaw Introduction

Tutors:

Time required: na

Next Date: TBD

Waiting Members:

Jointer-Planer Introduction

Tutors:

Time required: 60 min + 15 min per member

Next Date: 2025-7-2, 20:30

Waiting Members:

Laser Cutter Introduction

Tutors:

Time required: ~2h

Next Date: TBD

Waiting Members:

Metal Lathe Introduction

Tutors:

Time Required: 2-3h

Next Date: TBD

Waiting Members:

Sliding Table Saw Introduction

Tutors:

Time required: ~ 1 h

Next Date: 2025-4-9, 21:00

Waiting Members:

Table Saw Introduction

Tutors:

Time required: ~ 1 h

Next Date: 2025-6-18 20:00

Waiting Members:

Vertical Bandsaw Introduction

Tutors:

Time required: ~ 1.5 h

Next Date: 2025-6-25, 19:00

Waiting Members:

Woodturning Introduction

Tutors:

Time required: ~ 1 h + 20 min per person

Next Date: 2025-4-2, 20:00

Waiting Members:

Retrieved from "https://wiki.comakingspace.de/index.php?title=Pliers&oldid=20390"