Rotary Tool: Difference between revisions

From CoMakingSpace Wiki

(→‎Bits: wire brushes can "shoot" wires, never operate at speeds above 15k rpm)
m (Replaced content with "Rotary tools, made e.g. by Dremel or Proxxon, are commonly used by Makers and many accessories and hacks are available. {{MachineInclusion}} Category:Bits Category:Drills Category:Metalworking Category:Sanding")
 
(8 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{ToolInfoBox
|tool name=Dremel 4000
|image=Dremel 4000 with bits.JPG
|synonyms=multitool, "moto tool";<br>DE: Bohrschleifer, Feinbohrschleifer,<br>Kleinbohrmaschine, "Mini-Bohrmaschine"
|type=power tool
|access=upon introduction
|location=[[Metal Workshop|metal workshop]]
|material=[[wood]], [[plastics]], [[metals]], [[Material:Stripboard|stripboard]]
|tutors=[[Lukas]], [[Mitja]]
|similar=[[drills]], [[Disc Grinder|disc grinder]], ''Einhandstabschleifer''
|manual=[https://www.libble.de/dremel-4000/p/423544/ Libble.de] (also in the box)
}}
Rotary tools, made e.g. by Dremel or Proxxon, are commonly used by Makers and many accessories and hacks are available.
Rotary tools, made e.g. by Dremel or Proxxon, are commonly used by Makers and many accessories and hacks are available.


At the CoMakingSpace, you can use a Dremel 4000 with many accessories.
{{MachineInclusion}}
 
== Bits ==
Most rotary tool bits are designed for very high speeds and would not work well in a [[drills|drill]]. The maximum speeds for each type of bit can be found in the [https://www.libble.de/dremel-4000/p/423544/ manual], but it would be nice to build a more intuitive overview here as well.
 
* small [[Twist Drill Bits|twist drill bits]]
* abrasive cutting discs for metals (like a tiny [[Disc Grinder|disc grinder]])
** also work great with [[Material:Stripboard|stripboard]]
** not suitable for [[aluminum]] (too soft, clogs up the disc and can cause dangerous overheating)
* sanding drums (ideal for [[wood]])
* [[Wire Brushes|wire brushes]] - '''never operate above 15000 rpm, these can shoot little wire pieces at you even at lower speeds!'''
* grinding stones
* polishing pads
* abrasive burrs
* ...and more
 
There are some generic products on the market which ''may be'' of similar quality as the [https://www.dremeleurope.com/at/de/products/accessories/?start=0&System=Multifunktions-Werkzeugsystem&Multifunktions-Werkzeugsystem=DREMEL%C2%AE+4000 original manufacturers' bits] but are much cheaper.
 
== Other Useful Accessories ==
* flexible shaft
* pouch or case
* dental cleaner can be used for [http://www.instructables.com/id/Dremel-Small-Batch-Mixer/ small batch mixing]
* plastic [[filament]] can be used for friction welding<sup> [http://makezine.com/2015/04/30/turn-dremel-tool-plastic-welder/]</sup>
* self-built [http://www.instructables.com/id/Rotary-Tool-Router/ router base]
 


[[Category:Bits]]
[[Category:Bits]]
[[Category:Drills]]
[[Category:Drills]]
[[Category:Metalworking]]
[[Category:Metalworking]]
[[Category:Power Tools]]
[[Category:Sanding]]
[[Category:Sanding]]

Latest revision as of 07:39, 2 September 2022

Rotary tools, made e.g. by Dremel or Proxxon, are commonly used by Makers and many accessories and hacks are available.

Dremel 4000

MachineInfoBox

Dremel 4000

Dremel 4000.jpg
Synonyms: multitool, "moto tool";
DE: Bohrschleifer, Feinbohrschleifer,
Kleinbohrmaschine, "Mini-Bohrmaschine",
Geradschleifer
Type: Rotary Tool
Material: wood, plastics, metals, stripboard
Used with: rotary tool bits
Location: Metal Workshop
Access Requirements: Rotary Tool Introduction
Status: Working
Manual: Libble.de (also in the box)
Tutors: Lukas
Pakue
Mitja
Luzian
Utis
Similar (More or Less): drills, disc grinder, Einhandstabschleifer




Bits

Most rotary tool bits are designed for very high speeds and would not work well in a drill. The maximum speeds for each type of bit can be found in the manual, but it would be nice to build a more intuitive overview here as well.

  • small twist drill bits
  • abrasive cutting discs for metals (like a tiny disc grinder)
    • also work great with stripboard
    • not suitable for aluminum (too soft, clogs up the disc and can cause dangerous overheating)
  • sanding drums (ideal for wood)
  • wire brushes - never operate above 15000 rpm, these can shoot little wire pieces at you even at lower speeds!
  • grinding stones
  • polishing pads
  • abrasive burrs
  • ...and more
rotary tool with a box of rotary tool bits
some bits with very different applications may look very similar at first glance - make yourself familiar before you start!

There are some generic products on the market which may be of similar quality as the original manufacturers' bits but are much cheaper.

Other Useful Accessories