Project:TAC: Difference between revisions

From CoMakingSpace Wiki

(→‎Gallery: some more)
(→‎Gallery: rest of the boardmaking photos; next steps)
Line 33: Line 33:
File:TAC 13.JPG|chamfering the edges of the 6-player board on the [[Router Table|router table]]
File:TAC 13.JPG|chamfering the edges of the 6-player board on the [[Router Table|router table]]
File:TAC 14.JPG|chamfered edge of the 6-player board (before sanding)
File:TAC 14.JPG|chamfered edge of the 6-player board (before sanding)
File:coming soon.svg|some steps still missing here!
File:TAC 15.JPG|the soft spruce/fir wood was best cleaned up with [[sandpaper]] after [[routing]]
File:TAC 16.JPG|completely sanded area of the 6-player board
File:TAC 17.JPG|finally, the 6-player board (spruce/fir) was finished with [[Olive Oil|olive oil]]
File:TAC 18.JPG|since the 4-player board's [[hardwood]] fibers were easily cut by a knife, [[sanding]] and the resulting brightening of the ''Eukalyptus'' wood could be largely avoided during the cleanup process
File:TAC 19.JPG|partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood
File:TAC 20.JPG|cleaned up area of the 4-player board
File:TAC 21.JPG|the center of the 4-player board ("card pit"?) was covered in green [[felt]] for a nice look
File:TAC 22.JPG|''[[Alleskleber]]'' was used to stick the [[felt]] to the board
File:TAC 23.JPG|for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD)
File:TAC 24.JPG|finished 4-player board
File:TAC 00.JPG|finished 6-player board in use
File:TAC 00.JPG|finished 6-player board in use
</gallery>
</gallery>
== Next Steps ==
* make a card holder
* make a nice rulebook




Revision as of 18:47, 5 March 2019

ProjectInfoBox

"TAC" Boardgame

TAC 00.JPG
Status: final tweaks & documentation
Release Date: (mainly) summer 2018
Initiator: Flo
Team: Daniel, Lukas
Materials Used: glued laminated timber
(Eucalyptus diversicolor/"Karri" for 4 players, spruce/fir for 6);
TAC cards & marbles, (optional) felt, olive oil
Tools Used: CNC router, table saw, router table, rotary tool, sandpaper
Software Used: Fusion 360
Approx. Cost: 40 €


One of Lukas' colleagues kept talking about the game TAC whose inventors offered really nice & expensive deluxe boards but also sets of everything except the board, so they started to make some boards of their own.

intended mainly as a rough inspiration page for now, but please ask if you have any questions!


Gallery

  • preparing to cut a practice piece from one of our stock boards

    preparing to cut a practice piece from one of our stock boards

  • design of the practice piece with all the needed shapes in Fusion 360

    design of the practice piece with all the needed shapes in Fusion 360

  • (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!

    (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!

  • on to the full game - design in Fusion 360

    on to the full game - design in Fusion 360

  • partially routed 6-player board on the WorkBee

    partially routed 6-player board on the WorkBee

  • we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time)

    we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time)

  • back to pictures of the 4-player game: undecorated version completely routed

    back to pictures of the 4-player game: undecorated version completely routed

  • the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router

    the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router

  • since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw...

    since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw...

  • ...and trimmed to the partial-depth outline with a flush-cut router bit

    ...and trimmed to the partial-depth outline with a flush-cut router bit

  • after the outline was finished, the edges of the 4-player board were prettified with a roundover router bit

    after the outline was finished, the edges of the 4-player board were prettified with a roundover router bit

  • 4-player board ready to leave the workshop with only minor steps left

    4-player board ready to leave the workshop with only minor steps left

  • a chamfer bit was used to finalize the edges of the 6-player board on the router table

    a chamfer bit was used to finalize the edges of the 6-player board on the router table

  • chamfering the edges of the 6-player board on the router table

    chamfering the edges of the 6-player board on the router table

  • chamfered edge of the 6-player board (before sanding)

    chamfered edge of the 6-player board (before sanding)

  • the soft spruce/fir wood was best cleaned up with sandpaper after routing

    the soft spruce/fir wood was best cleaned up with sandpaper after routing

  • completely sanded area of the 6-player board

    completely sanded area of the 6-player board

  • finally, the 6-player board (spruce/fir) was finished with olive oil

    finally, the 6-player board (spruce/fir) was finished with olive oil

  • since the 4-player board's hardwood fibers were easily cut by a knife, sanding and the resulting brightening of the Eukalyptus wood could be largely avoided during the cleanup process

    since the 4-player board's hardwood fibers were easily cut by a knife, sanding and the resulting brightening of the Eukalyptus wood could be largely avoided during the cleanup process

  • partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood

    partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood

  • cleaned up area of the 4-player board

    cleaned up area of the 4-player board

  • the center of the 4-player board ("card pit"?) was covered in green felt for a nice look

    the center of the 4-player board ("card pit"?) was covered in green felt for a nice look

  • Alleskleber was used to stick the felt to the board

    Alleskleber was used to stick the felt to the board

  • for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD)

    for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD)

  • finished 4-player board

    finished 4-player board

  • finished 6-player board in use

    finished 6-player board in use

Next Steps

  • make a card holder
  • make a nice rulebook
Retrieved from "https://wiki.comakingspace.de/index.php?title=Project:TAC&oldid=5810"