Category:Saws: Difference between revisions
m (1 revision imported) |
(explained kerf, Category:Hardware) |
||
| Line 1: | Line 1: | ||
Saws are cutting tools with teeth or an abrasive edge that work by repeatedly ripping little bits out of a suitable material. They are most commonly used on [[ | Saws are cutting tools with teeth or an abrasive edge that work by repeatedly ripping little bits out of a suitable material. They are most commonly used on [[wood]]{{CN}} but special saws and saw blades exist for various materials like [[metals]], [[stone]] or [[glass]] to name a few. | ||
A disadvantage of saws is that they tend to create a lot of dust and noise... | A disadvantage of saws is that they tend to create a lot of dust and noise...and you sometimes lose a significant amount of material according to the width of the saw blade (the "kerf"). Make sure to cut just outside of your measurements to obtain accurate pieces, not directly on the line! | ||
== Blade Maintenance == | == Blade Maintenance == | ||
Many saws have replaceable blades, but even these can be quite costly and may be worth repairing once the time comes. Before sharpening, a blade may have to be set (DE: geschränkt) with a special tool to regain its cutting ability. | Many saws have replaceable blades, but even these can be quite costly and may be worth repairing once the time comes. Before sharpening, a blade may have to be set ''(DE: geschränkt)'' with a special tool to regain its cutting ability. | ||
Here's a [https://www.youtube.com/watch?v=psoD4mMsiDQ great video class] with information on sharpening and setting dovetail saws (starting about 40 minutes in). | Here's a [https://www.youtube.com/watch?v=psoD4mMsiDQ great video class] with information on sharpening and setting [[Dovetail Saws|dovetail saws]] (starting about 40 minutes in). | ||
[[Category:Hardware]] | |||
Revision as of 22:44, 5 September 2017
Saws are cutting tools with teeth or an abrasive edge that work by repeatedly ripping little bits out of a suitable material. They are most commonly used on wood [citation needed] but special saws and saw blades exist for various materials like metals, stone or glass to name a few.
A disadvantage of saws is that they tend to create a lot of dust and noise...and you sometimes lose a significant amount of material according to the width of the saw blade (the "kerf"). Make sure to cut just outside of your measurements to obtain accurate pieces, not directly on the line!
Blade Maintenance
Many saws have replaceable blades, but even these can be quite costly and may be worth repairing once the time comes. Before sharpening, a blade may have to be set (DE: geschränkt) with a special tool to regain its cutting ability.
Here's a great video class with information on sharpening and setting dovetail saws (starting about 40 minutes in).
Pages in category "Saws"
The following 20 pages are in this category, out of 20 total.
