Bandsaw Sled: Difference between revisions
From CoMakingSpace Wiki
(build photo) |
NitramLegov (talk | contribs) m (remove tutor property) |
||
| Line 9: | Line 9: | ||
|location=[[Location::Wood Workshop|wood workshop]] (''near'' [[bandsaw]]) | |location=[[Location::Wood Workshop|wood workshop]] (''near'' [[bandsaw]]) | ||
|access=read this page | |access=read this page | ||
|tutors=[[ | |tutors=[[User:Lukas|Lukas]] | ||
|manual= | |manual= | ||
|donation= | |donation= | ||
Revision as of 17:48, 4 March 2022
| ToolInfoBox Round Stock Sled | |
|---|---|
| |
| Synonyms: | DE: Bandsägen-Zuführschlitten |
| Type: | jig |
| Material: | round or thin pieces you want to crosscut; any material appropriate for the selected sawband |
| Used with: | Metabo BS 1638 W |
| Location: | wood workshop (near bandsaw) |
| Access Requirements: | read this page |
| Tutors: | Lukas |
| Similar (More or Less): | bandsaw fence |
Never attempt to cut round workpieces without a jig, they could rotate and bind with the blade!
Lukas built this jig in order to crosscut 100 mm acrylic pipe for Project:Fish Cages, but it should also work for less precisely round pieces (logs, branches) or smaller diameter pipes/tubes.
some 3D printed T-slot guides were screwed into the underside of the sled at just the right places for nice tracking on the machine table
