Jigsaws
ToolInfoBox Jigsaws | |
---|---|
Synonyms: | pendulum jigsaws, DE: Pendelstichsägen |
Type: | power saws |
Material: | wood, metal & more (depending on blade) |
Access Requirements: | Jigsaw Introduction |
Tutors: | Lukas, Mitja, Patrick |
A jigsaw is a powerful tool for cutting various hard materials in curved lines. For intricate shapes and thin materials, have a look at a scroll saw or a laser cutter. While relatively straight lines can be achieved by means of a fence, a circular saw (especially chop or table saw) will produce better results if you need precision.
Safety
When using the jigsaw, always take the time to properly clamp down your workpiece, hook up a shop vac and wear safety glasses. Wear hearing protection as it is really loud.
Accessories
Blades
Some saw blades for various materials should be available in each saw's box - if you broke one or need anything specific, please buy some new ones!
Links
Basics
Upgrade Ideas
- jigsaw table (can be self-built)
Parkside PSTD 800 A1
ToolInfoBox Parkside PSTD 800 A1 | |
---|---|
Location: | chop saw station |
Access Requirements: | Jigsaw Introduction |
Tutors: | Lukas, Mitja |
Manual: | in the box, pdf |
Mitja's jigsaw works with T-shank blades.
It has a laser sight but you are better off ignoring that feature and setting up a solid fence to cut along ;-)
Bosch PST 750 PE "EXPO2000"
ToolInfoBox Bosch PST 750 PE "EXPO2000" | |
---|---|
Location: | wood workshop |
Access Requirements: | Jigsaw Introduction |
Tutors: | Lukas |
Manual: | ManualsLib |
Lukas is permanently loaning his Bosch jigsaw to the Space.
It requires T-shank blades to work.
This tool is not ready for use yet since not all commissioning steps have been completed. The process is also tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
Task | comment | Status |
---|---|---|
Name the tool: | "EXPO2000" is the only name on the case, but actually a "PST 750 PE" by its inner workings | done |
Take a picture | - | done |
Find the manual as PDF | done | |
Documentation | especially the above section about blades - picture of a T-shank would be nice | pending |
Print QR-Code | use the wikicrawler | done |
Introduction | Jigsaw Introduction | done |
Security Check | Lukas | done |
Test | Lukas | done |
tool's name, owner and approx. value | entered by Lukas | done |
Last step: make it available | physically and in the wiki - then delete this template | pending |
Malte 3D printed an adapter to use this saw with our Festool shop vac, here's the design on Thingiverse in case it should break or go missing. You may need to tape the adapter to the saw.