Project:TAC

ProjectInfoBox "TAC" Boardgame
Status:	final tweaks & documentation
Release Date:	(mainly) summer 2018
Initiator:	Flo
Team:	Daniel, Lukas
Materials Used:	glued laminated timber (Eucalyptus diversicolor/"Karri" for 4 players, spruce/fir for 6); TAC cards & marbles, (optional) felt, olive oil
Tools Used:	CNC router, table saw, router table, rotary tool, sandpaper
Software Used:	Fusion 360
Approx. Cost:	40 €

One of Lukas' colleagues kept talking about the game TAC whose inventors offered really nice & expensive deluxe boards but also sets of everything except the board, so they started to make some boards of their own.

intended mainly as a rough inspiration page for now, but please ask if you have any questions!

Gallery

• 
  preparing to cut a practice piece from one of our stock boards
• 
  design of the practice piece with all the needed shapes in Fusion 360
• 
  (partially) failed practice piece: one of the tool changes caused the CNC router to move along the X axis - always home after a tool change!
• 
  on to the full game - design in Fusion 360
• 
  partially routed 6-player board on the WorkBee
• 
  we took care to remove the sawdust in between routing passes to avoid overheating the end mill (dust extraction was still a work in progress at the time)
• 
  back to pictures of the 4-player game: undecorated version completely routed
• 
  the decorated version required some manual corrections with a rotary tool because the warped board was not engraved evenly by the CNC router
• 
  since our end mills were too short to cut all the way through the workpiece at the edges, the rough shape was cut out on the table saw...
• 
  ...and trimmed to the partial-depth outline with a flush-cut router bit
• 
  after the outline was finished, the edges of the 4-player board were prettified with a roundover router bit
• 
  4-player board ready to leave the workshop with only minor steps left
• 
  a chamfer bit was used to finalize the edges of the 6-player board on the router table
• 
  chamfering the edges of the 6-player board on the router table
• 
  chamfered edge of the 6-player board (before sanding)
• 
  the soft spruce/fir wood was best cleaned up with sandpaper after routing
• 
  completely sanded area of the 6-player board
• 
  finally, the 6-player board (spruce/fir) was finished with olive oil
• 
  since the 4-player board's hardwood fibers were easily cut by a knife, sanding and the resulting brightening of the Eukalyptus wood could be largely avoided during the cleanup process
• 
  partially cleaned up area of the 4-player board - without sanding marks because a knife could be used on this wood
• 
  cleaned up area of the 4-player board
• 
  the center of the 4-player board ("card pit"?) was covered in green felt for a nice look
• 
  Alleskleber was used to stick the felt to the board
• 
  for nice and even adhesion in a round cutout, it works well to apply pressure with something round (like a CD)
• 
  finished 4-player board
• 
  finished 6-player board in use

Next Steps

• make a card holder
• make a nice rulebook