Cordless Drills

From CoMakingSpace Wiki

Revision as of 23:19, 24 October 2022 by NitramLegov (talk | contribs) (add type)

MachineInfoBox

Cordless Drills

Drilling wood.gif
Synonyms: cordless driver drills;
DE: Akkuschrauber,
Akkubohrschrauber
Material: depending on the bit:
screws, plastic, wood, metal
Used with: drill bits, screwdriver bits
Access Requirements: Drill Introduction
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Jakob
Similar (More or Less): drill press, screwdrivers,
rotary tool, screw gun


Cordless drills are very versatile tools and should not be missing from any workshop. Besides drilling, as the name implies, they are mostly used for driving screws ("electric screwdriver").

Here's a nice video about the internal mechanics of a typical drill!

Proper Use

Please follow these simple guidelines to avoid damage to your screws, material, or the drill itself:

  • the torque (DE: Drehmoment) can typically be set with the ring before the chuck
    • better start out too low than to round your screw in the first try - wood may also be damaged if screws (especially self-tapping/"Spax") are inserted too deep
    • the drilling setting at the end of the scale should only be used for drilling, it creates way too much torque for screws and screwdriver bits!
    • excessive torque does NOT make you screw faster, it really just wrecks stuff...
  • there may also be variable speed settings (slider on top)
    • only change when the drill is fully stopped
    • use the slower one (1) for screwing to prevent slipping
    • the higher speed can be used for drilling

Bits


Makita DDF483 (#1)

MachineInfoBox

Makita DDF483 (#1)

Makita DDF483.jpg
Type: Cordless Drills
Location: Drilling Table
Access Requirements: Drill Introduction
Status: Working
Manual: makita
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Jakob




A smaller and lighter cordless drill, that is best paired with a 2Ah battery. Was bought via betterplace donations in 2022 and another one through a private donation in 2022.


Makita DDF483 (#2)

MachineInfoBox

Makita DDF483 (#2)

Makita DDF483.jpg
Type: Cordless Drills
Location: Drilling Table
Access Requirements: Drill Introduction
Status: Working
Manual: makita
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Jakob





Makita DDF484 (#1)

MachineInfoBox

Makita DDF484 (#1)

Makita DDF484 with charger.jpeg
Type: Cordless Drills
Location: Drilling Table
Access Requirements: Drill Introduction
Status: Working
Manual: makita.de
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Jakob




We have two Makita DDF484 cordless drills. They have a 2 step metal gearbox for different drilling speeds. A torque limit for screwing can be set with the dial behind the chuck. Please use it to avoid breaking bits and screws due to too much torque! The chuck can hold up to 13mm drill bits.
One drill was donated by Ed and the batteries/charger are sponsored from multiple member donations, our Amazon Smile income as well as for the Tor4 workshops.


Makita DDF484 (#2)

MachineInfoBox

Makita DDF484 (#2)

Makita DDF484 with charger.jpeg
Type: Cordless Drills
Location: Drilling Table
Access Requirements: Drill Introduction
Status: Working
Manual: makita.de
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Jakob




Accessories

These were bought from member donations

  • 2x 18V 3Ah Batteries (BL1830B)
  • 1x charger (DC18RC)
  • MAKPAC box for charger and batteries (usually underneath the drilling table)

Tor 4 aquisitions

  • 2x 18V 5Ah batteries (BL1850B)
  • 1x charger (DC18RC)
  • MAKPAK box for charger, batteries and drill.

Betterplace donations

  • 1x 18V 2Ah battery (BL1820B)