File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 08:01, 10 January 2018 | Artboard 3.png (file) |  |
326 KB | Pakue (talk | contribs) | Map of the CoMakingSpace relative to the main train station. | 1 |
| 21:19, 9 January 2018 | Circular saw guide build 5.JPG (file) |  |
380 KB | Lukas (talk | contribs) | Self-made circular saw guide in use with the Herkules BHK 1600LE circular saw | 1 |
| 21:16, 9 January 2018 | Circular saw guide build 4.JPG (file) |  |
334 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 4 (optional): mark the different areas of the jig - where will the saw go, where can you place clamps? | 1 |
| 21:13, 9 January 2018 | Circular saw guide build 3.JPG (file) |  |
396 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 3: cut off the excess plywood with the '''exact saw you intend to use with the jig''' | 1 |
| 21:09, 9 January 2018 | Circular saw guide build 2.JPG (file) |  |
384 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 2: apply pressure to the glue-up where clamps don't reach by putting heavy stuff on top! | 1 |
| 21:07, 9 January 2018 | Circular saw guide build 1.JPG (file) |  |
334 KB | Lukas (talk | contribs) | How to make a circular saw guide, step 1: glue a straight board onto a piece of plywood. | 1 |
| 02:54, 6 January 2018 | Blast cabinet open.JPG (file) |  |
340 KB | Lukas (talk | contribs) | blast cabinet with its lid propped open | 1 |
| 17:55, 5 January 2018 | Screw head hex cap.PNG (file) |  |
4 KB | Lukas (talk | contribs) | icon of a hex cap screw head (screenshot of a Tinkercad model) | 1 |
| 18:39, 4 January 2018 | Embedded bottle finished.jpg (file) |  |
1.62 MB | Pakue (talk | contribs) | 1 | |
| 18:36, 4 January 2018 | Embedded bottle sanding.jpg (file) |  |
2.21 MB | Pakue (talk | contribs) | Sanding of the embedded bottle. | 1 |
| 18:33, 4 January 2018 | Embedded Object rasp.jpg (file) |  |
2.05 MB | Pakue (talk | contribs) | An embedded 3D print in resin. Rough shaping with a rasp. | 1 |
| 18:31, 4 January 2018 | Bottle Embedding Mould.jpg (file) |  |
1.41 MB | Pakue (talk | contribs) | Partially embedded bottle inside mould with wood pieces to keep it in place. | 1 |
| 18:29, 4 January 2018 | Resin pouring workspace.jpg (file) |  |
2.24 MB | Pakue (talk | contribs) | Workspace for resin pouring. | 1 |
| 18:25, 4 January 2018 | Embedded Campari.jpg (file) |  |
1.36 MB | Pakue (talk | contribs) | An embedded bottle of Campari in polyester resin. | 1 |
| 20:39, 3 January 2018 | Workbee frame.JPG (file) |  |
373 KB | Lukas (talk | contribs) | the assembled frame of our "Workbee" CNC router | 1 |
| 21:18, 2 January 2018 | Roubo workbench 1-24.JPG (file) |  |
418 KB | Lukas (talk | contribs) | our {{Roubo-1}} with all major steps finished - looks like a bench, works like a bench, and was a ton of fun to build! | 1 |
| 20:55, 2 January 2018 | Roubo workbench 1-23.JPG (file) |  |
418 KB | Lukas (talk | contribs) | an old slatted frame (''Lattenrost'') was added to our {{Roubo-1}} as a storage level | 1 |
| 20:49, 2 January 2018 | Roubo workbench 1-22.JPG (file) |  |
455 KB | Lukas (talk | contribs) | woodworking vise installed and ready to use on our {{Roubo-1}}! | 1 |
| 20:48, 2 January 2018 | Roubo workbench 1-21.JPG (file) |  |
456 KB | Lukas (talk | contribs) | two boards are added to our {{Roubo-1}}'s top to facilitate proper installation of a large woodworking vise | 1 |
| 20:37, 2 January 2018 | Roubo workbench 1-20.JPG (file) |  |
427 KB | Lukas (talk | contribs) | woodworking vise for our {{Roubo-1}} - seen here trying on a brand new pair of boards that will increase the benchtop's thickness | 1 |
| 20:35, 2 January 2018 | Roubo workbench 1-19.JPG (file) |  |
583 KB | Lukas (talk | contribs) | all that planing moved our {{Roubo-1}} around quite a bit and produced tons of shavings :-D | 1 |
| 20:32, 2 January 2018 | Roubo workbench 1-18.JPG (file) |  |
363 KB | Lukas (talk | contribs) | after a lot of rather rough and unpleasant planing of our {{Roubo-1}}'s top, we thankfully got a jointer plane to finish it up | 1 |
| 20:29, 2 January 2018 | Roubo workbench 1-17.JPG (file) |  |
470 KB | Lukas (talk | contribs) | diagonal stretchers were added to our {{Roubo-1}} to make it much more stable | 1 |
| 20:27, 2 January 2018 | Roubo workbench 1-16.JPG (file) |  |
489 KB | Lukas (talk | contribs) | our {{Roubo-1}} finally standing on its own legs - time to plane the top some more! | 1 |
| 20:21, 2 January 2018 | Roubo workbench 1-15.JPG (file) |  |
520 KB | Lukas (talk | contribs) | now it starts to look like something: all legs and the horizontal stretchers attached to our {{Roubo-1}} | 1 |
| 20:13, 2 January 2018 | Roubo workbench 1-14.JPG (file) |  |
382 KB | Lukas (talk | contribs) | test fitting one of our {{Roubo-1}}'s leg joints: the tenons of the leg (on the left) were covered in pencil so that the marks in the mortises show where the pieces currently get stuck and need some more work | 1 |
| 20:10, 2 January 2018 | Roubo workbench 1-13.JPG (file) |  |
358 KB | Lukas (talk | contribs) | chiseling part of a leg joint into our {{Roubo-1}} | 1 |
| 19:58, 2 January 2018 | Roubo workbench 1-12.JPG (file) |  |
357 KB | Lukas (talk | contribs) | rough work for a tenon done by drilling with Forstner bits - now the chiseling may begin! | 1 |
| 19:55, 2 January 2018 | Roubo workbench 1-11.JPG (file) |  |
313 KB | Lukas (talk | contribs) | Forstner bits are good for quick material removal prior to chiseling | 1 |
| 19:52, 2 January 2018 | Roubo workbench 1-10.JPG (file) |  |
352 KB | Lukas (talk | contribs) | transferring the outlines of a leg joint's tenons in order to cut the corresponding mortises into the top of our {{Roubo-1}} | 1 |
| 19:49, 2 January 2018 | Roubo workbench 1-09.JPG (file) |  |
359 KB | Lukas (talk | contribs) | finished leg for our {{Roubo-1}} | 1 |
| 19:46, 2 January 2018 | Roubo workbench 1-08.JPG (file) |  |
356 KB | Lukas (talk | contribs) | Once you have a benchtop, you can already use it! Legs are overrated ;-) Category:Workbenhes | 1 |
| 19:43, 2 January 2018 | Roubo workbench 1-07.JPG (file) |  |
338 KB | Lukas (talk | contribs) | chiseling a piece out of a leg joint on our Roubo-1 | 1 |
| 19:38, 2 January 2018 | Roubo workbench 1-06.JPG (file) |  |
378 KB | Lukas (talk | contribs) | preparing a leg joint for our {{Roubo-1}} with a Ryoba | 1 |
| 19:30, 2 January 2018 | Roubo workbench 1-05.JPG (file) |  |
364 KB | Lukas (talk | contribs) | {{Roubo-1}} glue-up, part two: lacking larger F-clamps, clamping pressure had to be provided by some cargo straps (paint buckets as weights and clamps on some edges should minimize bending) | 1 |
| 19:19, 2 January 2018 | Roubo workbench 1-04.JPG (file) |  |
377 KB | Lukas (talk | contribs) | gluing up the top of our {{Roubo-1}} - the planks could not be jointed beforehand so three threaded rods were added as reinforcements | 1 |
| 19:15, 2 January 2018 | Roubo workbench 1-03.JPG (file) |  |
398 KB | Lukas (talk | contribs) | simple jig for drilling horizontal holes into the planks that are going to make up the top of our {{Roubo-1}} | 1 |
| 19:12, 2 January 2018 | Roubo workbench 1-02.JPG (file) |  |
368 KB | Lukas (talk | contribs) | planks for our {{Roubo-1}}'s top laid out in their optimal arrangement for the first rough planing | 1 |
| 19:06, 2 January 2018 | Roubo workbench 1-01.JPG (file) |  |
286 KB | Lukas (talk | contribs) | Materials for our {{Roubo-1}}: ten 2000{{x}}80{{x}}60 mm and two 2000{{x}}100{{x}}80 mm spruce planks. | 1 |
| 11:24, 31 December 2017 | Very early woodshop.JPG (file) |  |
260 KB | Lukas (talk | contribs) | our wood workshop was used for all kinds of work (and storage) before we could build better options - so it never looked very tidy... | 1 |
| 11:20, 31 December 2017 | Kitchen installation.JPG (file) |  |
300 KB | Lukas (talk | contribs) | our kitchen, ready for the final installation steps | 1 |
| 11:17, 31 December 2017 | Removing old sink.JPG (file) |  |
367 KB | Lukas (talk | contribs) | a while after we removed an old sink, a bit of water still thought it would be funny to come splashing out of the wall... | 1 |
| 11:12, 31 December 2017 | Ceiling work.JPG (file) |  |
302 KB | Lukas (talk | contribs) | sometimes we need to get onto a ladder, e.g. to mount our projector or some extra outlets | 1 |
| 11:04, 31 December 2017 | E.Room after painting.JPG (file) |  |
323 KB | Lukas (talk | contribs) | freshly painted electronics room | 1 |
| 18:09, 29 December 2017 | Wall mounting panels.jpg (file) |  |
222 KB | Lukas (talk | contribs) | early on, we installed some large plywood or scrap wood panels on our walls for convenient mounting options (here in the CoMaking room) | 1 |
| 18:00, 29 December 2017 | Large sheet cutting.JPG (file) |  |
384 KB | Lukas (talk | contribs) | Ed and Lukas preparing a large plywood sheet for the construction of our very first lockers | 1 |
| 11:39, 29 December 2017 | First tools 2.JPG (file) |  |
399 KB | Lukas (talk | contribs) | another carload of tools is being moved into our new Space in September 2017 | 1 |
| 11:38, 29 December 2017 | First tools 1.JPG (file) |  |
360 KB | Lukas (talk | contribs) | the first carload of tools, just arrived on moving day in September 2017 | 1 |
| 11:12, 28 December 2017 | Dremel 4000 with bits.JPG (file) |  |
322 KB | Lukas (talk | contribs) | "Dremel 4000" rotary tool and a box of rotary tool bits | 1 |
| 19:00, 27 December 2017 | Drilling table.JPG (file) |  |
404 KB | Lukas (talk | contribs) | drilling table in our wood workshop as of 2017-12-21 | 1 |
