File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 16:08, 5 September 2017 | Engraved transparent acrylics.jpg (file) |  |
44 KB | Lukas (talk | contribs) | engraved piece of acrylic glass | 1 |
| 12:06, 5 September 2017 | Location-icon.svg (file) |  |
6 KB | Lukas (talk | contribs) | source: [https://openclipart.org/detail/177208/map-location] | 1 |
| 12:04, 5 September 2017 | Letter-icon.png (file) |  |
11 KB | Lukas (talk | contribs) | Main page icon for the '''[https://lists.schokokeks.org/mailman/listinfo.cgi/newsletter Newsletter]''' == License == Icon made by [http://www.flaticon.com/authors/madebyoliver Madebyoliver] from [http://www.flaticon.com Flaticon] is licensed by [htt... | 1 |
| 12:00, 5 September 2017 | Ingot iron.png (file) |  |
8 KB | Lukas (talk | contribs) | == Summary == icon designed by [http://chrisl21.deviantart.com/ ChrisL21] == License == [http://creativecommons.org/about/licenses/ Creative Commons Attribution-NonCommercial-No Derivate 3.0] | 1 |
| 11:40, 5 September 2017 | Shopping-icon.png (file) |  |
8 KB | Lukas (talk | contribs) | Icon made by [http://www.freepik.com/ Freepik] from [http://www.flaticon.com/ www.flaticon.com] | 1 |
| 10:18, 5 September 2017 | Pouring silicone.JPG (file) |  |
230 KB | Lukas (talk | contribs) | == Summary == Molding silicone being poured onto 3D printed positives glued to the bottom of a makeshift paper box == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:10, 5 September 2017 | Apple wood discs.JPG (file) |  |
183 KB | Lukas (talk | contribs) | == Summary == freshly sawn discs of apple wood waiting to be dried == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:09, 5 September 2017 | Apple logs prepared.JPG (file) |  |
252 KB | Lukas (talk | contribs) | == Summary == logs and discs of apple wood prepared for a drying experiment == Licensing == {{CC-by-sa-4.0}} | 1 |
| 10:07, 5 September 2017 | Wooden smoothing plane.JPG (file) |  |
279 KB | Lukas (talk | contribs) | == Summary == a smoothing plane, used to smoothen and finish wood surfaces == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:59, 5 September 2017 | Wood screws.JPG (file) |  |
353 KB | Lukas (talk | contribs) | == Summary == a pile of 4{{x}}50 mm wood screws with PZ 2 drive == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:58, 5 September 2017 | Wood carving chisels.JPG (file) |  |
102 KB | Lukas (talk | contribs) | == Summary == Set of twelve simple wood carving chisels. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:56, 5 September 2017 | Wood-glue.jpg (file) |  |
177 KB | Lukas (talk | contribs) | a bottle of PVA wood glue | 1 |
| 09:54, 5 September 2017 | Wire brushes.JPG (file) |  |
94 KB | Lukas (talk | contribs) | == Summary == Brass (top) and steel (bottom) wire brushes. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:52, 5 September 2017 | Weights not clamps.jpg (file) |  |
363 KB | Lukas (talk | contribs) | == Summary == It does not always have to be clamps: sometimes, adding enough weight to the board or sheet you want to saw through can secure it just as well and you don't have obstacles in your cutting path. == Licensing == {{CC... | 1 |
| 09:51, 5 September 2017 | Weighing silicone.JPG (file) |  |
271 KB | Lukas (talk | contribs) | == Summary == a workspace prepared for silicone molding with template, hot glue gun, measuring cup and scale == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:50, 5 September 2017 | Washers.JPG (file) |  |
223 KB | Lukas (talk | contribs) | == Summary == a pile of 4.3 mm washers == Licensing == {{CC-by-sa-4.0}} | 1 |
| 09:48, 5 September 2017 | Visicut-Icon.png (file) |  |
12 KB | Lukas (talk | contribs) | From the Visicut repository: The VisiCut Icon "icon.png" is from the icon pack "Pry System" by "Jonas Rask Design" and licensed under "Freeware Non-commercial" | 1 |
| 22:43, 4 September 2017 | Various adhesive tapes.JPG (file) |  |
129 KB | Lukas (talk | contribs) | == Summary == Our most commonly used adhesive tape varieties. Check out the clickable version on its material page! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:42, 4 September 2017 | VHS table assembly site.jpg (file) |  |
457 KB | Lukas (talk | contribs) | == Summary == halfway through assembling the VHS couch table legs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:40, 4 September 2017 | Torsion springs.jpg (file) |  |
366 KB | Lukas (talk | contribs) | == Summary == two torsion springs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:39, 4 September 2017 | Tinkercad screenshot.JPG (file) |  |
147 KB | Lukas (talk | contribs) | == Summary == Screenshot of a simple model created in Tinkercad. Tinkercad and the Tinkercad logo are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries. Autodesk screen shot... | 1 |
| 22:39, 4 September 2017 | Tin snips.jpg (file) |  |
269 KB | Lukas (talk | contribs) | == Summary == Photo of our snips == Licensing == {{PD}} | 1 |
| 22:38, 4 September 2017 | Tension springs.jpg (file) |  |
298 KB | Lukas (talk | contribs) | == Summary == two tension springs == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:37, 4 September 2017 | TBB done.jpg (file) |  |
620 KB | Lukas (talk | contribs) | == Summary == finished "typewriter bicycle bell" == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:36, 4 September 2017 | TBB-9.JPG (file) |  |
464 KB | Lukas (talk | contribs) | == Summary == all the equipment used to shape a typewriter side wall into a bicycle compatible piece == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:35, 4 September 2017 | TBB-8.JPG (file) |  |
384 KB | Lukas (talk | contribs) | == Summary == preparing to drill through a bicycle handle mount in order to complete the typewriter bicycle bell == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:34, 4 September 2017 | TBB-7.JPG (file) |  |
345 KB | Lukas (talk | contribs) | == Summary == sawing a former typewriter side wall to size in order to shape a nice base for my bicycle bell == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:32, 4 September 2017 | TBB-6.JPG (file) |  |
402 KB | Lukas (talk | contribs) | == Summary == managed to avoid the hacksaw until now: side walls including future bicycle bell from a typewriter == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:32, 4 September 2017 | TBB-5.JPG (file) |  |
426 KB | Lukas (talk | contribs) | == Summary == most stubborn remains of a broken typewriter being salvaged for useful parts == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:31, 4 September 2017 | TBB-4.JPG (file) |  |
715 KB | Lukas (talk | contribs) | == Summary == (some) non-bicycle bell parts salvaged from a broken typewriter along with the bit set used in the disassembly == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:30, 4 September 2017 | TBB-3.JPG (file) |  |
504 KB | Lukas (talk | contribs) | == Summary == electric typewriter wreck with the section of interest for making a bicycle bell == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:29, 4 September 2017 | TBB-2.JPG (file) |  |
451 KB | Lukas (talk | contribs) | == Summary == Rear view of a broken electric typewriter - let Lukas know if you have any project ideas for the motor which still works great! == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:29, 4 September 2017 | TBB-1.JPG (file) |  |
499 KB | Lukas (talk | contribs) | == Summary == broken 1970's electric typewriter (IBM) to be torn down - out of curiosity and to make an awesome bicycle bell == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:27, 4 September 2017 | T-slot nuts.JPG (file) |  |
236 KB | Lukas (talk | contribs) | a pile of M3 t-slot nuts | 1 |
| 22:26, 4 September 2017 | Subland twist drill.JPG (file) |  |
255 KB | Lukas (talk | contribs) | set of twist drill bits | 1 |
| 22:25, 4 September 2017 | Stone wall.JPG (file) |  |
477 KB | Lukas (talk | contribs) | photo of a stone wall | 1 |
| 22:24, 4 September 2017 | Staples in lamppost.JPG (file) |  |
424 KB | Lukas (talk | contribs) | == Summary == A wooden lamp post covered in staples from years of postering. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:24, 4 September 2017 | Staple removal.JPG (file) |  |
152 KB | Lukas (talk | contribs) | == Summary == Removing a staple from a piece of wood using pincers. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:23, 4 September 2017 | Staple gun.jpg (file) |  |
205 KB | Lukas (talk | contribs) | scaled down | 2 |
| 22:21, 4 September 2017 | Stack of wood.JPG (file) |  |
618 KB | Lukas (talk | contribs) | == Summary == A stack of wood (split as firewood). == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:20, 4 September 2017 | Spring clamp against vibration.JPG (file) |  |
337 KB | Lukas (talk | contribs) | == Summary == When cutting large sheets of plywood, e.g. with a jigsaw, vibrations can be pretty annoying and catch your blade even when you have someone helping you. Try clamping the beginning of your cut with a [[Clamps#Spring Clamps|spring c... | 1 |
| 22:19, 4 September 2017 | Spring clamp.JPG (file) |  |
169 KB | Lukas (talk | contribs) | a spring clamp | 1 |
| 22:17, 4 September 2017 | Sockets.JPG (file) |  |
326 KB | Lukas (talk | contribs) | == Summary == Some 3/8" square drive hex sockets for use with a socket wrench == Licensing == {{PD}} | 1 |
| 22:05, 4 September 2017 | Sewing-thread.jpg (file) |  |
257 KB | Lukas (talk | contribs) | spools of sewing thread | 1 |
| 22:04, 4 September 2017 | Scrollsaw-Schneckchen.jpg (file) |  |
2.33 MB | Lukas (talk | contribs) | Cutting parts for Project:Schneckchen on a scroll saw Photo by Mitja | 1 |
| 22:03, 4 September 2017 | Scroll saw blades.JPG (file) |  |
250 KB | Lukas (talk | contribs) | == Summary == different scroll saw blades in a more-practical-than-pretty storage container == Licensing == {{CC-by-sa-4.0}} | 1 |
| 22:01, 4 September 2017 | Scriber.JPG (file) |  |
217 KB | Lukas (talk | contribs) | == Summary == 230 mm scriber with a straight and an angled end. == Licensing == {{CC-by-sa-4.0}} | 1 |
| 21:59, 4 September 2017 | Screwdrivers.JPG (file) |  |
306 KB | Lukas (talk | contribs) | a couple of screwdrivers | 1 |
| 21:57, 4 September 2017 | Screw head sunk.PNG (file) |  |
11 KB | Lukas (talk | contribs) | == Summary == icon of a countersunk screw head (screenshot of a Tinkercad model) | 1 |
| 21:55, 4 September 2017 | Screw head cylindrical.PNG (file) |  |
8 KB | Lukas (talk | contribs) | icon of a cylindrical screw head, (screenshot of a Tinkercad model) | 1 |
