Prusa i3 MK3S+

From CoMakingSpace Wiki

Revision as of 14:06, 15 January 2024 by Johannes (talk | contribs) (Created page with "==Prusa i3 MK3S== {{MachineInfoBox |machine name=Original Prusa i3 MK3S |image= |synonyms= |type=3D Printer |material=plastic filament |location=Location::3D Printing Area |status=Operational |firmware=https://www.prusa3d.com/drivers/ |software=Slic3r Prusa Edition |manual=[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf prusa3d.com] |assetid=5 }}In addition to receiving a personal introduction from one of the tutors...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Prusa i3 MK3S

MachineInfoBox

Original Prusa i3 MK3S

Machine-default.png
Type: 3D Printers
Material: plastic filament
Location: Office
Access Requirements: 3D Printer Introduction
Status: UNKNOWN STATUS
Firmware: https://www.prusa3d.com/drivers/
Software: Slic3r Prusa Edition
Manual: prusa3d.com
Tutors: Lukas
NitramLegov
Pakue
Mitja
Lmnl99
Johannes
Ciaran
Luzian
Leo
Narquadah
Kalunho
Björn


In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.

The build volume of this model is 250 × 210 × 210 mm.