Eccentric Sanders
| MachineInfoBox Eccentric Sanders | |
|---|---|
| |
| Synonyms: | geared eccentric sanders, random orbital sanders, DE: (Getriebe-)Exzenterschleifer, Handscheibenschleifmaschinen |
| Material: | wood |
| Used with: | sanding discs |
| Access Requirements: | Handheld Sander Introduction |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
| Similar (More or Less): | belt sander |
An eccentric sander is very useful for finishing surfaces. The major advantage of this kind of sander is the irregular motion of the sanding disc which greatly reduces unsightly marks on the workpiece.
Safety
When using an eccentric sander, always take the time to properly clamp down your workpiece, hook up the shop vac and wear safety glasses. Depending on your material, you may also need a dust mask.
As with all our sanders, please go outside if you can't keep the airborne dust to a minimum!
Suggested Reading
Festo RO 2 E
| MachineInfoBox Festo RO 2 E | |
|---|---|
| |
| Used with: | 150 mm sanding discs with 8 holes |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | manuall.de |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!
When the foam part of our usual sanding part crumbled away, Keno and Lukas glued its velcro (Klett) sheet to a healthier pad with bad velcro ("Polymer-Klebstoff", XPS scrap piece for even clamping pressure without breaking the disc).
Festo RO 150 E
| MachineInfoBox Festo RO 150 E | |
|---|---|
| |
| Used with: | 150 mm sanding discs with 8 holes |
| Access Requirements: | Handheld Sander Introduction |
| Manual: | nearly identical to Festo RO 2 E (manuall.de) |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian Jakob |
The Festo RO 150 E needs to be repaired (see #25) before it can be added to the wood workshop. Since the other one is working, this is not overly urgent though.
Bosch PEX 300 AE
| MachineInfoBox Bosch PEX 300 AE | |
|---|---|
| |
| Material: | depends on the disc |
| Used with: | 125 mm sanding discs (8 holes) |
| Access Requirements: | Handheld Sander IntroductionThe part "]]" of the query was not understood.</br>Results might not be as expected. |
| Manual: | bosch-do-it.de |
| Tutors: | Lukas NitramLegov Pakue Lmnl99 Johannes Luzian Keno Sebastian JakobThe part "]]" of the query was not understood.</br>Results might not be as expected. |
Lars brought us his Bosch PEX 300 AE as a permanent loan!
It is a much handier machine than the large ROTEX models which you will appreciate during any longer sanding task.
Due to the fine dust filter you should be able to use it inside for a while if you have correctly perforated sanding discs, but please go outside when you're sanding a lot and the wheather allows it!
This machine is missing a QR code!
