Eccentric Sanders

From CoMakingSpace Wiki

Revision as of 20:34, 13 June 2019 by NitramLegov (talk | contribs) (switching to a machine and add location and tutors as SMW parameters)

MachineInfoBox

Eccentric Sanders

Eccentric sander motion.png
Synonyms: geared eccentric sanders,
random orbital sanders,
DE: (Getriebe-)Exzenterschleifer,
Handscheibenschleifmaschinen
Material: wood
Used with: sanding discs
Access Requirements: Handheld Sander Introduction
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Sebastian
Jakob
Similar (More or Less): belt sander

[[Has caption::power sanders| ]]

An eccentric sander is very useful for finishing surfaces. The major advantage of this kind of sander is the irregular motion of the sanding disc which greatly reduces unsightly marks on the workpiece.

Safety

When using an eccentric sander, always take the time to properly clamp down your workpiece, hook up the shop vac and wear safety glasses. Depending on your material, you may also need a dust mask.

As with all our sanders, please go outside if you can't keep the airborne dust to a minimum!

Suggested Reading


Festo RO 2 E

MachineInfoBox

Festo RO 2 E

Festo RO 2 E.jpg
Used with: 150 mm sanding discs with 8 holes
Access Requirements: Handheld Sander Introduction
Manual: manuall.de
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Sebastian
Jakob

The Festo RO 2 E had a broken switch when we got it, we overrode that and installed a cord switch instead. That means it has no protection against accidental turning on after you plug it in (keine Anlaufsicherung)!

When the foam part of our usual sanding part crumbled away, Keno and Lukas glued its velcro (Klett) sheet to a healthier pad with bad velcro ("Polymer-Klebstoff", XPS scrap piece for even clamping pressure without breaking the disc).



Festo RO 150 E

MachineInfoBox

Festo RO 150 E

Festo RO 150 E.jpg
Used with: 150 mm sanding discs with 8 holes
Access Requirements: Handheld Sander Introduction
Manual: nearly identical to Festo RO 2 E (manuall.de)
Tutors: Lukas
NitramLegov
Pakue
Lmnl99
Johannes
Luzian
Keno
Sebastian
Jakob

The Festo RO 150 E needs to be repaired (see #25) before it can be added to the wood workshop. Since the other one is working, this is not overly urgent though.