File list
From CoMakingSpace Wiki
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 13:58, 8 May 2019 | Schwenkgrill 12.JPG (file) |  |
414 KB | Lukas (talk | contribs) | Project:Schwenkgrill um das "W", das die Bewegung des Dreibeins am idealen Punkt stoppen soll, in der richtigen Position anzuschweißen, sollte man sich lieber ein paar helfende Hände holen... | 1 |
| 13:55, 8 May 2019 | Schwenkgrill 11.JPG (file) |  |
413 KB | Lukas (talk | contribs) | Project:Schwenkgrill Testaufbau zur Ausrichtung des "W"-Stücks | 1 |
| 13:33, 8 May 2019 | Schwenkgrill 10.JPG (file) |  |
430 KB | Lukas (talk | contribs) | Project:Schwenkgrill der Bewehrungsstahl wird in eine (ungefähr) symmetrische "W"-Form gebogen | 1 |
| 13:29, 8 May 2019 | Schwenkgrill 09.JPG (file) |  |
396 KB | Lukas (talk | contribs) | Project:Schwenkgrill mit einem Bohrschleifer können kleine rechteckige Aussparungen für die Umlenkrolle in das mittlere Rohr geschnitten werden | 1 |
| 13:26, 8 May 2019 | Schwenkgrill 08.JPG (file) |  |
427 KB | Lukas (talk | contribs) | Project:Schwenkgrill ein großer Stufenbohrer gibt einen ganz passablen handgeführten Entgrater ab... | 1 |
| 13:18, 8 May 2019 | Schwenkgrill 07.JPG (file) |  |
468 KB | Lukas (talk | contribs) | Project:Schwenkgrill die flachgedrückten Stellen werden mit einem Stufenbohrer weit aufgebohrt, um sich gut um die Gewindestange bewegen zu können | 1 |
| 13:16, 8 May 2019 | Schwenkgrill 06.JPG (file) |  |
503 KB | Lukas (talk | contribs) | Project:Schwenkgrill Die beiden äußeren Stahlrohre werden an einem Ende im Schraubstock flachgedrückt | 1 |
| 13:14, 8 May 2019 | Schwenkgrill 05.JPG (file) |  |
453 KB | Lukas (talk | contribs) | Project:Schwenkgrill Bohrlöcher in Metall am besten immer gleich entgraten, um sich nicht zu verletzen! | 1 |
| 13:12, 8 May 2019 | Schwenkgrill 04.JPG (file) |  |
503 KB | Lukas (talk | contribs) | Project:Schwenkgrill um in die Stahlrohre zu bohren sind ein Maschinenschraubstock und eine Tischverlängerung sinnvoll | 1 |
| 13:10, 8 May 2019 | Schwenkgrill 03.JPG (file) |  |
458 KB | Lukas (talk | contribs) | Project:Schwenkgrill die Umlenkrolle braucht eine Bohrung für die Gewindestange (am besten schön zentriert auf der Drechselbank) | 1 |
| 13:04, 8 May 2019 | Schwenkgrill 02.JPG (file) |  |
459 KB | Lukas (talk | contribs) | Project:Schwenkgrill optional, aber cool: Umlenkrolle aus Buche drechseln | 1 |
| 12:58, 8 May 2019 | Schwenkgrill 01.JPG (file) |  |
356 KB | Lukas (talk | contribs) | Project:Schwenkgrill (fast) das gesamte Material zu Beginn | 1 |
| 20:17, 7 May 2019 | E-Room-Co.jpg (file) |  |
457 KB | Johannes (talk | contribs) | 1 | |
| 20:37, 3 May 2019 | Wedding figures cake.jpg (file) |  |
229 KB | Mitja (talk | contribs) | Finished Project:Wedding Figures on a special cake. | 1 |
| 20:15, 3 May 2019 | Wedding figures painted.jpg (file) |  |
86 KB | Mitja (talk | contribs) | Painted wedding figures for cake decoration. | 1 |
| 20:14, 3 May 2019 | Wedding figures cut.jpg (file) |  |
131 KB | Mitja (talk | contribs) | Cut and sanded figures before painting. | 1 |
| 20:13, 3 May 2019 | Wedding figures cutting.jpg (file) |  |
131 KB | Mitja (talk | contribs) | Cutting the figures on the scroll saw. | 1 |
| 20:12, 3 May 2019 | Wedding figures copy.jpg (file) |  |
115 KB | Mitja (talk | contribs) | Copying the shapes from a printout using carbon paper. | 1 |
| 17:26, 2 May 2019 | Abused woodturning tools.JPG (file) |  |
380 KB | Lukas (talk | contribs) | woodturning tools that were abused and bent :-( | 1 |
| 17:15, 2 May 2019 | Panel carrying.JPG (file) |  |
433 KB | Lukas (talk | contribs) | using panel carriers to move a large workpiece out of the CoMaking room | 1 |
| 17:08, 2 May 2019 | Panel carriers.JPG (file) |  |
301 KB | Lukas (talk | contribs) | two panel carriers on a table | 1 |
| 16:57, 2 May 2019 | Fretsaws.JPG (file) |  |
463 KB | Lukas (talk | contribs) | two fretsaws (one without a blade) on the wall | 1 |
| 17:09, 24 April 2019 | Speakers.jpg (file) |  |
223 KB | Luzian (talk | contribs) | 2*5W 4ohm 52mm speaker and 10W 4ohm 3" sub woofer | 1 |
| 17:00, 24 April 2019 | Audio amp.jpg (file) |  |
304 KB | Luzian (talk | contribs) | 1 | |
| 16:03, 24 April 2019 | Photo 2019-04-24 16-02-00.jpg (file) |  |
61 KB | Luzian (talk | contribs) | 1 | |
| 15:41, 24 April 2019 | BlenderLiveRender.png (file) |  |
1.88 MB | Luzian (talk | contribs) | 1 | |
| 15:25, 24 April 2019 | Laptopstand V3 vs V2.png (file) |  |
700 KB | Luzian (talk | contribs) | v2 & v3 next to each other | 1 |
| 14:56, 24 April 2019 | Laptopstand V2.png (file) |  |
184 KB | Luzian (talk | contribs) | 1 | |
| 22:05, 19 April 2019 | Swinging puffin.jpg (file) |  |
2.04 MB | Ignaz (talk | contribs) | Picture of finished swinging puffin. | 1 |
| 21:56, 19 April 2019 | Mask for swinging bird puffin.pdf (file) |  |
220 KB | Ignaz (talk | contribs) | Cutting mask for a swinging puffin made of wood | 1 |
| 22:17, 18 April 2019 | CNCjs connection.jpg (file) |  |
49 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Management Buttons.jpg (file) |  |
17 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Job Preview.jpg (file) |  |
213 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Console.jpg (file) |  |
133 KB | NitramLegov (talk | contribs) | 1 | |
| 22:16, 18 April 2019 | CNCjs Camera Widget.jpg (file) |  |
42 KB | NitramLegov (talk | contribs) | 1 | |
| 22:15, 18 April 2019 | CNCjs Axes widget.jpg (file) |  |
60 KB | NitramLegov (talk | contribs) | 1 | |
| 19:03, 17 April 2019 | Turning tool.jpg (file) |  |
5.7 MB | Luzian (talk | contribs) | Old insert next to tool | 1 |
| 15:38, 17 April 2019 | Slic3r.png (file) |  |
554 KB | Luzian (talk | contribs) | Slic3ring a 3DBenchy | 1 |
| 15:07, 17 April 2019 | Laptop stand v1.png (file) |  |
898 KB | Luzian (talk | contribs) | 1 | |
| 15:01, 17 April 2019 | Waxwrap5.JPG (file) |  |
509 KB | Lukas (talk | contribs) | Project:Beeswax Wrap the finished beeswax wrap can be cleaned with soapy water (not too hot!) | 1 |
| 14:57, 17 April 2019 | Waxwrap4.JPG (file) |  |
564 KB | Lukas (talk | contribs) | Project:Beeswax Wrap The warmth of your hands should now be sufficient to shape your beeswax wrap around pretty much anything! If it doesn't keep its shape, add more wax. | 1 |
| 14:54, 17 April 2019 | Waxwrap3.JPG (file) |  |
349 KB | Lukas (talk | contribs) | Project:Beeswax Wrap place the beeswax-covered fabric between to sheets of baking paper and use a flatiron to melt the wax into it | 1 |
| 14:42, 17 April 2019 | Surface Powerbank.jpg (file) |  |
7.25 MB | Luzian (talk | contribs) | Picture of the finished Powerbank | 1 |
| 14:33, 17 April 2019 | BMS-wirering .png (file) |  |
75 KB | Luzian (talk | contribs) | 1 | |
| 14:31, 17 April 2019 | Waxwrap2.JPG (file) |  |
440 KB | Lukas (talk | contribs) | Project:Beeswax Wrap spread the beeswax flakes onto a piece of cotton fabric | 1 |
| 14:28, 17 April 2019 | Waxwrap1.JPG (file) |  |
405 KB | Lukas (talk | contribs) | Project:Beeswax Wrap first of all, the beeswax needed to be shredded into workable pieces | 1 |
| 16:00, 16 April 2019 | BMS 3s.jpg (file) |  |
3.54 MB | Luzian (talk | contribs) | Battery management system | 1 |
| 20:42, 14 April 2019 | CNC Router Power Supply.png (file) |  |
10 KB | NitramLegov (talk | contribs) | 1 | |
| 20:38, 14 April 2019 | CNC Router Wiring.jpg (file) |  |
3.29 MB | NitramLegov (talk | contribs) | 1 | |
| 12:43, 8 April 2019 | Outdoortable 6.jpg (file) |  |
177 KB | Manu (talk | contribs) | 1 |
