Bandsaw Sled: Difference between revisions
From CoMakingSpace Wiki
NitramLegov (talk | contribs) m (remove tutor property) |
NitramLegov (talk | contribs) m (German) |
||
Line 1: | Line 1: | ||
{{ToolInfoBox | {{ToolInfoBox | ||
|tool name=Round Stock Sled | |tool name=Round Stock Sled | ||
|image=bandsaw sled.JPG | |german=Bandsägen-Zuführschlitten|image=bandsaw sled.JPG | ||
|synonyms=DE: Bandsägen-Zuführschlitten | |synonyms=DE: Bandsägen-Zuführschlitten | ||
|type=[[jig]] | |type=[[jig]] |
Revision as of 11:38, 2 May 2022
ToolInfoBox Round Stock Sled | |
---|---|
Synonyms: | DE: Bandsägen-Zuführschlitten |
Type: | jig |
Material: | round or thin pieces you want to crosscut; any material appropriate for the selected sawband |
Used with: | Metabo BS 1638 W |
Location: | wood workshop (near bandsaw) |
Access Requirements: | read this page |
Tutors: | Lukas |
Similar (More or Less): | bandsaw fence |
Never attempt to cut round workpieces without a jig, they could rotate and bind with the blade!
Lukas built this jig in order to crosscut 100 mm acrylic pipe for Project:Fish Cages, but it should also work for less precisely round pieces (logs, branches) or smaller diameter pipes/tubes.
some 3D printed T-slot guides were screwed into the underside of the sled at just the right places for nice tracking on the machine table