Jointer-Planer: Difference between revisions
From CoMakingSpace Wiki
(commissioning; moving "links" to beginning introduction page) |
(safety to-dos) |
||
| Line 32: | Line 32: | ||
|IntroductionComment=[[Jointer-Planer Introduction]] | |IntroductionComment=[[Jointer-Planer Introduction]] | ||
|Security= | |Security= | ||
|SecurityComment= | |SecurityComment=printed manual needs to be kept at the machine, [[Push Blocks|push blocks]] need to be adapted with pins that fall down behind the workpiece (and/or make a new one with a lip) | ||
|Test= | |Test= | ||
|TestComment= | |TestComment= | ||
Revision as of 07:30, 12 July 2020
| MachineInfoBox Hammer A3-31 | |
|---|---|
| |
| Synonyms: | planer-thicknesser, power jointer, thickness planer; DE: Abricht- und Dickenhobelmaschine, "Abrichte", "Dickte" |
| Material: | naturally structured wood (not more engineered than glued laminated timber!) |
| Access Requirements: | Jointer-Planer IntroductionSome use of "" in your query was not closed by a matching "". |
| Manual: | felder-gruppe.at (DE), (EN) |
| Tutors: | Lukas Pakue Sebastian LoewensteinSome use of "" in your query was not closed by a matching "". |
| Similar (More or Less): | jointer plane, planer |
A jointer is used for straightening the narrow sides of wooden boards which is necessary for panel glue-ups and some kinds of joinery. It basically consists of a flat surface with a slightly protruding cutting drum at the center.
We chose to get a combination jointer/planer to save valuable space: thanks to the second flat surface under this cutting drum, you can also thickness boards with this machine!
This tool is not ready for use yet since not all commissioning steps have been completed. The process is not yet tracked on GitHub. Feel free to contribute to making it usable, any help is very welcome!
| Task | comment | Status |
|---|---|---|
| Name the tool: | - | done |
| Take a picture | - | pending |
| Find the manual as PDF | felder-gruppe.at (DE), (EN) | done |
| Documentation | this page, status: in commissioning | pending |
| Print QR-Code | use the wikicrawler | pending |
| Introduction | Jointer-Planer Introduction | pending |
| Security Check | printed manual needs to be kept at the machine, push blocks need to be adapted with pins that fall down behind the workpiece (and/or make a new one with a lip) | pending |
| Test | to be done or witnessed by a manager | pending |
| tool's name, owner and approx. value | provide to Patrick for inventorization | pending |
| Last step: make it available | physically and in the wiki - then delete this template | pending |
Alternatives
- jointing can also be achieved with a plane (ideally a long-bodied jointer plane) or a special jig for the table saw
- instead of a thickness planer, you can use bench planes or a handheld planer
