Herkules Pro-Line Flüsterkompressor Siltek 24: Difference between revisions

From CoMakingSpace Wiki

Line 8: Line 8:
|material=[[air]]
|material=[[air]]
|used with=[[#Accessories|list of accessories below]];<br>[[Blast Cabinet|blast cabinet]]
|used with=[[#Accessories|list of accessories below]];<br>[[Blast Cabinet|blast cabinet]]
|location=[[Location::Office]]
|location=[[Location::Metal Workshop|metal workshop]]
|manual=[https://media.cdn.bauhaus/m/709373/BH_DOC_709373.pdf bauhaus.info]
|manual=[https://media.cdn.bauhaus/m/709373/BH_DOC_709373.pdf bauhaus.info]
|assetid=91|donation=
|assetid=91
|donation=
|similar=
|similar=
}}
}}

Revision as of 07:45, 3 February 2024

Herkules Pro-Line Flüsterkompressor Siltek 24

MachineInfoBox

Herkules Pro-Line Flüsterkompressor Siltek 24

Herkules Pro-Line Flüsterkompressor Siltek 24.jpeg
Synonyms: DE: Kompressor
Type: Compressor
Material: air
Used with: list of accessories below;
blast cabinet
Location: Cold Metal Area
Access Requirements: Compressor Introduction
Status: Working
Manual: bauhaus.info
Tutors: Lukas
NitramLegov
Pakue
Luzian



We got a silent air compressor for use within our workshop with the following specs:

  • Noise: 59 db
  • Capacity: 24 liters
  • Max pressure: 8 bar
  • Motor Power: 1kW

Pressure Control

This compressor does only have one outlet. On this outlet, it will always deliver the set up pressure, which you can adjust by turning the pressure reduction knob on the top. Turning the knob clockwise will increase pressure, counterclockwise turning increases it!

For an accurate adjustment, first close the reducer all the way and then open it to the desired extent.