CMI C-S-BS 250: Difference between revisions

Latest revision as of 22:26, 12 June 2024

CMI C-S-BS 250

MachineInfoBox CMI C-S-BS 250

Synonyms:	CMI C-BAN-250 (probably the same); DE: "Metall-Bandsäge"
Type:	Vertical Bandsaws
Material:	metal (depending on blade); wood (currently not intended)
Used with:	1400 mm bandsaw blades
Location:	Hot Metal Area
Access Requirements:	Vertical Bandsaw Introduction
Status:	Working
Manual:	nearly identical: Westfalia RBS 205
Tutors:	Lukas Jakob Loewenstein
Similar (More or Less):	scroll saw

This small bandsaw does not have much power, but may be used to cut soft metals. As it has rarely been used and we have a horizontal bandsaw now, we might transform it into a belt sander.

The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. We should turn an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).

Please refer to the proper blade-guide distances explained in our bandsaw introduction, NOT the ones from the manual!

Specs:

blade length - 1400 mm
max. blade width - ???
max. blade thickness - 0.36 mm^[1]
max. cutting depth - 80 mm

@@ Line 1: / Line 1: @@
+== CMI C-S-BS 250 ==
 {{MachineInfoBox
 |machine name=CMI C-S-BS 250
+|german=Bandsäge (Metall)
 |image=CMI_C_S_BS_250.JPG
-|synonyms=CMI C-BAN-250 (probably the same)
+|synonyms=CMI C-BAN-250 (''probably'' the same);<br>DE: "Metall-Bandsäge"
-|type=power [[saw]]
+|type=Vertical Bandsaw
-|material=[[wood]], [[metal]] (depending on blade)
+|material=[[metal]] (depending on blade);<br>[[wood]] (currently not intended)
 |used with=1400 mm [[Bandsaw Blades|bandsaw blades]]
-|location= [[Location::Metal Workshop|metal workshop]]}
+|location= [[Location::Hot Metal Area]]
-|access=[[Bandsaw Introduction]]
-|tutors=[[Tutor::User:Lukas|Lukas]]
 |manual=nearly identical: [https://www.westfalia-versand.at/service/dat_down.php?datei_id=129742&usg=AOvVaw3sTFdt-PG9b8-ZyYRiJYsb Westfalia RBS 205]
-|donation=
+|assetid=2|donation=
 |similar=[[Scroll Saw|scroll saw]]
 }}
-This small bandsaw does not have much power, but is nice for learning the basics and in case you just need to make some curvy or cold cuts through soft metals.
+This small bandsaw does not have much power, but may be used to cut soft metals. As it has rarely been used and we have a [[Horizontal Bandsaw|horizontal bandsaw]] now, we might [https://github.com/comakingspace/do-something/issues/311 transform it into a belt sander].
-The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. [[User:Ignaz|Ignaz]] is going to [[turn]] an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).
+The blade guides are very simple, just consisting of two pins for the sides and a bearing for the back of the blade. We should [[turn]] an eccentric bearing mount to increase their lifetime (by default, the blade runs too close to the center of the bearing).
-Please refer to the proper blade-guide distances explained in our [[Bandsaw Introduction|bandsaw introduction]], NOT the ones from the manual!
+'''Please refer to the proper blade-guide distances explained in our [[Bandsaw Introduction|bandsaw introduction]], NOT the ones from the manual!'''
 Specs:
@@ Line 24: / Line 25: @@
 * max. blade thickness - 0.36 mm<sup> [https://www.shopbox24.de/werkzeugstahl-premium-saegeband-1400-mm-x-6-mm-x-0-36-mm-x-14-zaehne-pro-zoll-fuer-weiche-metalle-wie-bronze-kupfer-und-aluminium/a-58501/]</sup>
 * max. cutting depth - 80 mm
+<br clear="all" />
-{{#set:
-Machinetype=Bandsaw
-}}