Prusa i3 MK2S (1): Difference between revisions

Latest revision as of 14:03, 18 July 2024

Prusa i3 MK2S (#1)

MachineInfoBox Original Prusa i3 MK2S (#1)

Synonyms:	"P1", Prusa i3 MK2 (nearly identical)
Type:	3D Printers
Material:	plastic filament
Location:	Office
Access Requirements:	3D Printer Introduction
Status:	UNKNOWN STATUS
Firmware:	https://www.prusa3d.com/drivers/
Software:	Slic3r Prusa Edition
Manual:	prusa3d.com
Tutors:	Lukas NitramLegov Pakue Mitja Lmnl99 Johannes Ciaran Luzian Leo Narquadah Kalunho Björn

The Prusa i3 MK2S is our default 3D printer. We have five of them, named "P1" through "P5".

Please note that P1 has received an upgrade and now has a magnetic board.

In addition to receiving a personal introduction from one of the tutors, make sure that you have read the handbook and use the latest version of Slic3r available at the drivers and manuals page.

The build volume of this model is 250 × 210 × 200 mm.

@@ Line 1: / Line 1: @@
+== Prusa i3 MK2S (#1)==
 {{MachineInfoBox
-|machine name=Original Prusa i3 MK2S
+|machine name=Original Prusa i3 MK2S (#1)
 |image=Prusa i3 MK2S.JPG
-|synonyms=Prusa i3 MK2 ''(nearly identical)''<br />DE: 3D-Drucker
+|synonyms="P1", Prusa i3 MK2 ''(nearly identical)''
-|type=3D printer
+|type=3D Printer
-|material=plastic [[filament]], [[PLA]], [[PET]]
+|german=3D-Drucker
-|location=[[3D Printer Farm|3D printer farm]]
+|material=plastic [[filament]]
-|access=upon [[3D Printer Introduction|personal introduction]]
+|location=[[Location::3D Printing Area]]
-|status=see [[3D Printer Farm#Available Printers|3D printer status list]]
+|status=Operational
 |firmware=https://www.prusa3d.com/drivers/
 |software=[[Slic3r]] Prusa Edition
 |manual=[http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf prusa3d.com]
-|tutors={{M}}, {{P}}
+|assetid=5
 }}
-The Prusa i3 MK2S is our default 3D printer in the [[3D Printer Farm|3D printer farm]]. We have five of them, named "P1" through "P5".
+The Prusa i3 MK2S is our default 3D printer. We have five of them, named "P1" through "P5".
+Please note that P1 has received an upgrade and now has a magnetic board.
 In addition to receiving a [[3D Printer Introduction|personal introduction]] from one of the tutors, make sure that you have read the [http://prusa3d.com/downloads/manual/prusa3d_manual_mk2s_en.pdf handbook] and use the latest version of [[Slic3r]] available at the [https://www.prusa3d.com/drivers/ drivers and manuals page].
-== Dangers ==
+The build volume of this model is 250{{x}}210{{x}}200 mm.
-* exposed heated parts - may still be hot if the display is already turned off!
-** the print head reaches temperatures up to 230 °C during operation
-** the bed reaches temperatures up to 100 °C during operation
-* machine parts may rapidly change direction - do not reach in when a print is running!
-* machine may keep executing its commands after something went wrong
-** every move is based on the initial homing ("zero-ing")
-** no sensing of obstacles or current position!
-== Maintenance ==
-See [[3D_Printer_Farm#Maintenance]].
- <br clear="all">
-{{MachineInfoBox
-|machine name=Original Prusa i3 MK2S Multi Material
-|image=MultiMaterialPrinter.JPG
-|synonyms=DE: 3D-Drucker
-|type=3D printer with multi material support
-|material=plastic [[filament]], [[PLA]], [[PET]]
-|location=[[3D Printer Farm|3D printer farm]]
-|access=upon [[3D Printer Introduction|personal introduction]]
-|status=see [[3D Printer Farm#Available Printers|3D printer status list]]
-|firmware=https://www.prusa3d.com/drivers/
-|software=[[Slic3r]] Prusa Edition
-|manual=[https://www.prusa3d.com/downloads/manual/Original-Prusai3-MK2-MM-quickstart.pdf prusa3d.com]
-|tutors=
-}}
-[[Category:3D Printing]]
+<br clear=all>